Set of USED Rotors sold as pictured. Sold as is no returns or exchanges.
The WP Pro rear brake rotor kit can greatly improve your stopping performance on the Nissan GT-R R35. Weighing in at 4000lbs, the GT-R is very hard on brakes with most drivers cracking the discs even from hard street driving. Upgraded brake rotors should help dissipate heat more efficiently, provide better braking balance, and increase the longevity of your brake rotors. From the factory, the 2008+ GT-R came with 380x30mm rotors in the rear which also accommodate the factory electronic parking brake. WP Pro’s new 385x30mm brake rotor upgrade for the Nissan GT-R provides a much needed improvement for street and track drivers.
The WP Pro rear brake rotor upgrade increases your rotor size from 380mm to 385mm. To use the larger diameter rotor, WP Pro supplies a caliper spacer that is designed for all 2008 and up models. The rotors feature a machined aluminum hat with 2 piece hardware. Each rotor has been heat treated for 24 hours to 800 degrees Celsius (1472F). One of the biggest advantages of doing a brake upgrade is the rotational weight savings. Even though these were a 2 piece rotor from Nissan and Brembo, the rear 380mm rotors weighed in at 27lbs per corner. The stock rotors have a cast aluminum housing where the WP Pro rotors are CNC billet aluminum. The new rear rotors weigh only 22.90 lbs. which saves you 4.1 lbs. per corner over the stock 380mm rotors. The rotational weight savings is like taking 12.3 lbs. of dead weight off each corner!
To improve your braking, you want to have better heat dissipation, even brake pad wear, and a firmer pedal feel. These rotors feature a unique Sun Cut pattern with the drilled holes overlaying the slotted design. This design allows for air to be sucked into the surface and pushed out through the vanes like a turbo system. The new design by WP Pro gives the maximum amount of heat dissipation along with improved longevity of the rotor. With the more effective curved vanes, it helps dissipate heat away from the rotors. This design is used to improve cooling by pushing cool air from the center of the wheel to where the rotor needs it most. It also acts like a heat exchanger to carry heat away from the rotor. With the 2 piece rotor design and the improved cooling, the brakes pads have an even wear on both sides and eliminate potential brake fade.
The WP Pro rear brake upgrade for the Nissan GT-R 2008+ is a direct bolt-on application. It can work with all GT-R models from around the world. Whether you are looking for an advantage on the track or its time to replace your stock brake components due to wear and tear, this is the best option for your GT-R. Each kit has been manufactured with high quality standards and that come from rigorous testing. The kit is sold as a complete rear axle setup with rotors, hardware, and hats. Replacement brake discs can be purchased separately when necessary as the brake hat is not a consumable item.
WARNING: Cancer and Reproductive Harm
Corsa Performance 3.5in. Cat-Back; Dual Rear Exit with Twin 5.0in. Black PVD Flat Cut Tips Nissan GTR
Agency Power Electronic Valve Controlled 90mm Exhaust Muffler with Matte Black Tips Nissan GT-R R35 09-17