Save up to 40% on VR Forged wheel sets! - Shop Now
Whiteline Category Banner
  See more parts for your American Motors Eagle

Richmond Gear Differential Bearing Kit - Timken

$169.10

Richmond Gear

Model #83-1058-1

Hurry Low Stock


Shopper Award

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Richmond - Differential Bearing Kit - Timken

Features

  • California Proposition 65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
  • Title: Differential Bearing Kit
  • Differential Case Design Type: Dana 30
  • FULL KIT DANA 30 FORD '66-'90

Notes:

For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Fits position: Front

Fits position: Rear

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1980-1988
American Motors Eagle

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1986-1989
Ford Aerostar

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966-1971
Ford Bronco

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967-1971
International Scout

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971-1977
International Scout II

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1984-2001
Jeep Cherokee

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971-1983
Jeep CJ5

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971-1975
Jeep CJ6

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1976-1986
Jeep CJ7

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1986-1992
Jeep Comanche

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1972-1973
Jeep Commando

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1993-1996
Jeep Grand Cherokee

  • For Dana 30; Conversion Kit for Preload Shim Style Ring and Pinion; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966-1971
Jeep J-100

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966-1971
Jeep Jeepster

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1981-1985
Jeep Scrambler

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1987-1995
Jeep Wrangler

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970, 1972-1974
Volvo 142

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971
Volvo 142

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier),
  • and Thread Locking Compound
1970-1974
Volvo 144

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970-1975
Volvo 164

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1990-1993
Volvo 240

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1975-1984
Volvo 242

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1975-1989
Volvo 245

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1976-1981
Volvo 265

  • For Dana 30; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Slinger, Pinion Washer; Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Who is Richmond Gears?

Richmond Gears is a company that was founded in 1915 and is based in Liberty, South Carolina, that specializes in manufacturing high-quality drivetrain components for the automotive industry. They have been in the business for more than 80 years and have one of the most comprehensive parts lists in the market. 

Today, they are considered one of the go-to brands of many professional mechanics, DIY customers, and tuners.

Continuous Development

The company never stops in its search for innovative ways to improve its products. It is why many hot rod builders and racers around the world choose Richmond Gears. It allows them to customize their drivetrain according to their need. 

Designed to Perform

Each product is engineered to perform even in the harshest condition. Every component is precisely cut using the most advanced cutting tool in the industry. It allows them to create pieces with very tight tolerances and guarantees that perfect fit.

Purchase Richmond Gears At Vivid Racing

If you are in the market for high-quality drivetrain components and want something that could take the abuse of high horsepower engines, then Richmond Gears is the brand for you. 

It offers ring and pinion sets and transmissions, and accessories, synthetic gear oils, installation kits, instructional videos, spools and mini-spools, transmission fluids, and rear-end lubes. They also have parts for vehicles made from the 1940s, making them a favorite brand of many classic car owners.

To know more about Richmond Gears, visit Vivid Racing and check out their list of offers that fit your needs.

Richmond's Warranty

Our commitment to quality is backed by some of the best warranty coverage in the industry. Richmond Performance products are warranted against defects for a period of two (2) year under normal driving conditions.

Check out these other great products