Save up to 40% on VR Forged wheel sets! - Shop Now
More Boost? - Affirm
  See more parts for your Dodge Ram 2500

SuspensionMAXX MAXXLinks Heavy Duty Sway Bar End Links 11" Center to Center RAM 2500 | 3500 2003-2005

$149.99

SuspensionMAXX

Model #SMX-122611EX


Shopper Award

SuspensionMaxx Is Proud To Introduce Our Extreme Duty Sway Bar Links. Designed For Lifted Dodge Ram Trucks That Do Not Use A Sway Bar Relocation Brackets.

The Extreme Duty Sway Bar Links Are Based Off Our Original Maxx Link Patented Design But Utilize A 33 Percent Larger and 50 Percent Stronger Configuration For Lifted Applications.

The Higher Roll Center Of Lifted 2500 and 3500 Trucks Puts Higher Dynamic Loads On The Stabilizer Links. Having A Strong Sway Bar Link That Can Handle These Extreme Loads Without Breaking Is Critical.

The Extreme Duty Sway Bar Links Are Built For These Conditions. Extreme Duty Sway Bar Links For 2003-2005 Dodge Ram 2500/3500 With Approximate 7.0 Inch Of Lift.

Center To Center Measurement Of 11.0 Inch Sold In Pairs. Wear Prone Stock Ball Socket Is Replaced With A Long-Lasting, Simple and Robust Design. Thermoplastic/Urethane Bushings Perform Better and Last Longer Than Original Equipment Rubber Design. Features Include 4140 Alloy Steel Eyelets, Drawn Over Mandrel Steel Tubing and Grade 8 Bolts. Direct Replacement For OE Sway Bar End Links-Measures 11.0 Inch Center To Center. Maintenance-Free, Corrosion Resistant, and Wont Squeak Or Rattle. Excellent SuspensionMaxx Customer Service and Technical Support. 100 Percent American Made and Covered By The Maxxlinks Limited Warranty.

Maxxlinks SMX-1226 Are Engineered To Directly Replace The Stock Sway Bar Links On 2003-2005 Ram 4X4 2500/3500 Including Mega Cab Models.

Maxxlinks Heavy Duty Sway Bar End Links Are Your Solution To Weak Original Equipment Sway Bar Links. Instead Of Using A Ball and Socket Design That Is Prone To Rust and Deterioration, We Implement A Rubber Bushing That Provides Needed Articulation Without Corrosion and Premature Wear.

Maxxlinks Remain Tight and Free Of Play Much Longer Than The Stock Links, and They Wont Rattle Over Bumps. Rather Than Frequently Replacing Your Oe Links, Enjoy The Cost Efficiency Of Long Lasting Maxxlinks.

Maxxlinks Heavy Duty Sway Bar End Links Use Thermoplastic/Urethane Bushings To Perform Better and Last Longer Than The Original Equipment Ball-In-Socket Design. Eyelet Links Are Manufactured With Ultra-High Strength 4140 Treated Alloy Steel and Electroplated With Yellow Zinc Dichromate For Corrosion Resistance. Shaft Sections Are Made From Drawn Over Mandrel Steel Tubing and Grade 8 Bolts For Durability. SMX-1227 Also Features An Extra Heavy Duty Mounting Links Which Are Required For This Application. Maintenance Free Maxxlinks Come Complete With Stainless Steel Washers and Locking Fasteners.

Maxxlinks Can Be Used As High-Quality Replacement Parts Or As A Preventative Maintenance Measure.

Maxxlinks Heavy Duty Sway Bar End Links Simply Replace Original Equipment Sway Bar End Links. No Drilling Is Required. Installation Takes Just Forty Five Minutes To An Hour and Is Supported By The SuspensionMaxx Technical Support Program. SMX-1226 Directly Replaces Dodge Part Number 68001734Ab. 100 Percent Manufactured In The Us and Covered Under The Maxxlinks Limited Warranty.

Features:

  • Position Front
  • Drive Type 4X4
  • Material 4140 treated alloy steel
  • Center to Center Measurement 11.0 inch
  • Bushing Material Thermoplastic/urethane
  • Bolt Grade 8
  • Bolt Size 0.5 inch
  • Sold As Kit
  • Quantity Per Kit 2 Sway Bars
Fitment:
  • RAM 2500 2003-2005
  • RAM 3500 2003-2005

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2003-2005
Dodge Ram 2500

2003-2005
Dodge Ram 3500

Who Is SuspensionMAXX?

SuspensionMAXX is a company that was founded in 2002. The company manufactures automotive suspension and specialty parts for different vehicle platforms. They offer lift kits and other suspension products for practically every vehicle makes and models on the road. Today, SuspensionMAXX has established its brand as one of the go-to companies for suspension upgrades and accessories.

Quality Products Made In The USA

All of the SuspensionMAXX products are designed and manufactured at their facility in Bay City, Michigan, and are headed by their President Larry Verbowski. Verbowski heads all the engineering and manufacturing operations of the company.  

Working closely with the company allows them to create superior products used by the original equipment manufacturers, government contracts, and the aftermarket sector.

Using Only The Best To Build The Best

Each component is carefully designed using the best materials available. Most of their parts are subjected to rough terrains and extreme weather conditions, and that is why it is a must that it is made to be durable and robust. Everything is carefully measured down to the last unit to ensure that it fits perfectly into the vehicle, giving their customers a hassle-free installation experience.

Purchase SuspensionMAXX At Vivid Racing

If you are looking to improve the stance and handling of your vehicle, then upgrade it with parts from SuspensionMAXX. They have been manufacturing suspension products for two decades and have proven themselves to be a brand you can depend on. 

To know more about SuspensionMAXX and what they can offer, visit Vivid Racing and check out their list of products that fit your specific requirement.




Check out these other great products