Buy Now - Pay Later with Affirm
Learn More

Tilton 2 disc Carbon Clutch Kit Mitsubishi EVO IV-VIII

$5,094.99

Tilton

Model #56-352


Shopper Award
Tilton 2 disc Carbon Clutch Kit Mitsubishi EVO IV-VIII

Tilton Carbon/Carbon clutch is the absolute finest clutch package available for the EVO, benefiting from Tilton 18+ years of carbon racing clutch development. The 100% carbon matrix plates utilized in the clutch provide great driveability, have an extremely high heat capacity that enables the clutch to be slipped without overheating/warping and have a very low inertia for improved shifting and transmission synchro life. In addition, carbon clutches include an additional pressure plate that compensates for carbon plate wear to provide long-term clutch life. After both pressure plates are used, the clutch can be rebuilt for under $200 (standard rebuild).

The flywheel included in the packages has been engineered to have a compromised weight/inertia that provided increased performance (faster engine acceleration) and good drivability (reduced bogging).

Also included with each clutch package is a hydraulic release bearing (HRB) that mounts inside the bellhousing and replaces the stock slave cylinder/fork arm release bearing mechanism. The HRB provides quick shifting, low pedal effort and self-adjusts for clutch wear.

Specs:
Weight (clutch & flywheel): 16.2 lbs
Torque capacity: 860 lb-ft
Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2003
Mitsubishi Evolution

Tilton produces a wide range of driveline and brake components, in-cockpit controls and starter motors. Driveline components include clutches, flywheels, bellhousings and hydraulic release bearings. Brake components and in-cockpit controls include pedal assemblies, master cylinders, balance bars, proportioning valves and related accessories. Super Starters by Tilton were introduced in 1981 as the first high torque mini-starter for racing applications.

Tilton products are primarily designed for racing use and can be found worldwide in nearly every form of racing. Tilton continues to expand its offerings to includes products for the high-performance street market.

Tilton Engineering believes that having Engineering, Manufacturing and Quality Control within the same building is the best way to insure the highest quality products are delivered to customers. Our products are designed by experienced engineers, who understand the needs of racers, using the latest solid modeling CAD and Finite Element Analysis (FEA) software. 90% of our machined components are manufactured at our facility in Buellton, California using top-level equipment, including a Toyoda Horizontal Milling Center (HMC) and Mori Seike lathes. After machining, products are quality checked using Browne and Sharpe Coordinate Measuring Machines (CMM) and tested using proprietary equipment.

Check out these other great products