Baja Designs Lighting Cat
  See more parts for your Bentley Continental GT

H&R Trak+ | 5/112 | 57.1 | Bolt | 14x1.5 | 15mm | DR Wheel Spacer Volkswagen Golf V GTI 08-09



Model #3055571

Hurry Low Stock

Shopper Award

Wider is Better®! H&R TRAK+® Wheel Spacers move your wheels and tires outwards so they are more flush with the fender-instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+® you can fill the gap in your fenders and GO WIDE!

TRAK+® Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+® Wheel Spacers are hubcentric and feature a full contact hub-just like the factory hub-for even load force distribution and lateral support.

Select applications now also available in black hard anodized.


  • Widen vehicle track with TRAK+® Wheel Spacers
  • Perfect fit hubcentric design
  • Durable lightweight aluminum/magnesium alloy
  • Affordable and easy to install
  • Bolt Pattern: 5/112
  • Center Bore: 57.1
  • Thread Type: 14x1.5
  • Spacer Type: DR
  • Width: 15mm
  • Bolt Type


1.  Audi
  • Audi A3
    • Audi A3 Type 8P, 2WD, 4cyl, TDI 05-up
    • Audi A3 Quattro Type 8P, AWD, 4cyl, 6cyl, TDI 07-up
  • Audi A4
    • Audi A4 2WD, Type 8E, 4 cyl 02-08
    • Audi A4 2WD, 6 cyl 96-01
    • Audi A4 2WD, 4 cyl 96-01
    • Audi A4 2WD, Type 8E, 6 cyl 02-08
    • Audi A4 Avant 2WD, Type 8E, 6 cyl 02-08
    • Audi A4 Avant 2WD, Type 8E, 4 cyl 02-08
    • Audi A4 Avant 2WD 98-01
    • Audi A4 Avant Quattro AWD 98-01
    • Audi A4 Avant Quattro AWD, Type 8E, 6 cyl 02-08
    • Audi A4 Avant Quattro AWD, Type 8E, 4 cyl 02-08
    • Audi A4 Cabrio 2WD, AWD, Type 8H, 4 cyl, 6 cyl 02-09
    • Audi A4 Quattro AWD, Type 8E, 6 cyl 02-08
    • Audi A4 Quattro AWD, Type 8E, 4 cyl 02-08
    • Audi A4 Quattro AWD 96-01
  • Audi A6
    • Audi A6 2WD 98-04
    • Audi A6 2WD, 6 cyl 95-97
    • Audi A6 2WD, 4F 05-11
    • Audi A6 Avant 2WD, 4F 06-11
    • Audi A6 Avant 2WD 98-04
    • Audi A6 Avant Quattro AWD, 4F 06-11
    • Audi A6 Avant Quattro AWD 98-04
    • Audi A6 Quattro AWD, 4F 05-11
    • Audi A6 Quattro AWD 98-04
  • Audi A8
    • Audi A8 AWD 05-09
    • Audi A8 AWD 97-04
    • Audi A8 Quattro AWD 05-09
    • Audi A8 Quattro AWD 97-04
  • Audi R8
    • Audi R8 V8, V10 08-up
    • Audi R8 Cabrio V8, V10 08-up
  • Audi RS4
    • Audi RS4 AWD 01-06
    • Audi RS4 AWD, 4.2 FSI Quatro 07-08
    • Audi RS4 Cabrio AWD 08
  • Audi RS6 AWD, Type 4F 08-up
  • Audi S4
    • Audi S4 AWD, Type 8E, V8 04-08
    • Audi S4 AWD 00-03
    • Audi S4 AWD, Type 100 92-94
    • Audi S4 Avant AWD, Type 8E, V8 04-08
    • Audi S4 Avant AWD 00-03
    • Audi S4 Cabrio AWD, Type 8E, V8 04-08
  • Audi S6
    • Audi S6 AWD, V10 07-11
    • Audi S6 AWD 02-03
    • Audi S6 AWD 92-97
    • Audi S6 Avant AWD 02-03
    • Audi S6 Avant AWD 92-97
  • Audi S8 AWD 97-02
  • Audi TT
    • Audi TT 2WD 07-up
    • Audi TT Quattro AWD 07-up
    • Audi TT Quattro Roadster AWD 07-up
    • Audi TT Roadster 2WD 07-up
    • Audi TT RS AWD 13-up
  • Audi TTS
    • Audi TTS Quattro AWD 07-up
    • Audi TTS Quattro Roadster AWD 07-up
  • Audi V8 Quattro Type D11 89-94
2.  Bentley
  • Bentley Continental Flying Spur Type 3W 05-up
  • Bentley Continental GT  03-up
3.  Volkswagen
  • Volkswagen Beetle
    • Volkswagen Beetle 2.5L 12-up
    • Volkswagen Beetle Turbo 2.0L Turbo 12-up
  • Volkswagen CC
    • Volkswagen CC Sport, Luxury, VR6 Sport 09-up
    • Volkswagen CC VR6 4motion 09-up
  • Volkswagen Eos  07-up
  • Volkswagen Eurovan Type T4 94-03
  • Volkswagen Golf V
    • Volkswagen Golf V (Rabbit S) 2.5L, 1.9 TDI, 2.0L Turbo 06-09
    • Volkswagen Golf V (Rabbit) 2.5L, 1.9 TDI, 2.0L Turbo 06-09
    • Volkswagen Golf V GTI  06-07
    • Volkswagen Golf V GTI  08-09
  • Volkswagen Golf VI
    • Volkswagen Golf VI TDI 10-up
    • Volkswagen Golf VI 2.5L 10-up
    • Volkswagen Golf VI GTI 2.0L Turbo 10-up
    • Volkswagen Golf VI R  11-up
  • Volkswagen Jetta V
    • Volkswagen Jetta V 2.5L, 1.9 TDi, 2.0L Turbo 05-10
    • Volkswagen Jetta V GLI 2.0L Turbo up to vin #030983 06-07
    • Volkswagen Jetta V GLI 2.0L Turbo after vin #030984 07-10
  • Volkswagen Jetta VI
    • Volkswagen Jetta VI GLI  11-up
    • Volkswagen Jetta VI S 2.0L Turbo, 2.5L 11-up
    • Volkswagen Jetta VI SE 2.0L Turbo, 2.5L 11-up
    • Volkswagen Jetta VI SEL 2.0L Turbo, 2.5L 11-up
    • Volkswagen Jetta VI TDI Clean Diesel TDI 11-up
  • Volkswagen Passat
    • Volkswagen Passat Sedan 4motion 06-11
    • Volkswagen Passat Sedan VR6, TDI, 1.8T, 2.0L 06-11
    • Volkswagen Passat Sedan SE, SEL, V6 12-up
    • Volkswagen Passat Sedan S, SE, SEL, 2.5L TDI 12-up
    • Volkswagen Passat Wagon 4motion 06-11
    • Volkswagen Passat Wagon VR6, TDI, 1.8T, 2.0L 06-11
  • Volkswagen R32 AWD 07-09
  • Volkswagen Tiguan Type 5N, 4WD 09-up


All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines:

a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:
Taper 60° End digit 01
Round head for M12/d24 mm, for M14/d28 mm End digit 02
Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
Flat head for Porsche original wheels M14 x 1.5 End digit 06

d) Safety guidelines 

(Minimum number of turns for wheel bolts / nuts):

M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

Vehicle Engine Notes
Bentley Continental GT

Volkswagen GTI MK5

Volkswagen Golf MK5

About H&R Springs

H&R Springs was founded in the late 1970s by Werner Heine and Heinz Remmen. The pair of them saw the need for improved suspension on the street and shared the belief that, with such, vehicles would have more control and better handling. Both Mr. H and Mr. R had years of professional and personal automotive experience. They used their technical know-how, driving experience, and suspension expertise to build superior quality springs that would create a new look in the automotive world with a “correct vehicle stance.” Mr. H and Mr. R’s commitment to producing a quality product allowed them to obtain TUV certification and the European performance spring market was subsequently born. From the very beginning, Mr. Heine and Mr. Remmen have been leaders and innovators with great influence in the suspension aftermarket; such remains true to this day. 

H&R's Company Growth

Since its inception 50 years ago, H&R Special Springs has been manufacturing the highest quality premium suspension components available on the market. H&R Springs boast proven quality and true performance that can only be obtained through precise, in-house design, innovative technology, and superb attention to detail. These standards define what the H&R Springs brand is all about. With an esteemed automotive heritage, H&R Springs continues its dedication to building performance street suspension components that unleash a vehicle’s true superior handling and ride potential.

Over the years, H&R Springs has developed a diverse and comprehensive line of products and suspension applications for the street. H&R now manufactures four different spring product series, six different coilover product lines, two different Cup Kit lines, a sway bar program, a lightweight line of I.D. Race Springs, and the ever-popular Quick-Safe wheel bolt stud conversions. What’s more, the company also has the largest wheel spacer and adaptor program in the industry. 

Why Choose H&R Springs?

The H&R Springs company philosophy is simple yet effective: To manufacture the best suspension products using the highest grade materials available and backing them with unparalleled customer service. Every H&R suspension application is designed to be vehicle-specific; all of its products are designed to enhance handling potential, personal style, and retain vehicle ride comfort.

H&R Springs has established a solid reputation, heritage of industry respect, and customer confidence thanks to the quality of its products that is second to none. An additional benefit is knowing that H&R parts work right out of the box with no hassle. All H&R products are 100 percent manufactured in Germany and exceed ISO quality assurance standards. Every single component undergoes stringent inspections and rigorous testing to ensure premium performance. H&R Springs’ quality shines not only in its finished product but also in the company’s commitment to customer service and distributor relationships.

Upgrade Your Suspension to H&R Springs

H&R Springs remains an industry leader in high-performance, quality suspension components for the street and track. No matter the application, H&R has become synonymous with consistent, proven suspension performance and quality. If you are looking to take your ride’s suspension to the next level, look no further than H&R Springs. With H&R, you will experience unparalleled performance, an attractive stance, and remarkable ride quality/comfort levels.

Vivid Racing carries a full lineup of H&R products and accessories, including coilovers, camber bolts, electronic lowering kits, lug nuts, mounts, springs, sway bars, wheel bolts, wheel spacers, and more! If you have any questions about H&R Springs or any of its products, please feel free to call our expert parts team at (480) 966-3040.  

H&R Store | H&R Coilovers | H&R Electronic Lowering Systems | H&R Handling Arms

H&R Mounts | H&R Springs | H&R Sway Bars | H&R Wheel Bolts | H&R Wheel Spacers

Check out these other great products