See more parts for your Mercedes-Benz S320

H&R Trak+ | 5/112 | 66.5 | Bolt | 14x1.5 | 3mm | DR Wheel Spacer Mercedes-Benz S 320 W140 92-99

$69.95

H&R

Model #655665

Help me decide

Shopper Award

Wider is Better®! H&R TRAK+® Wheel Spacers move your wheels and tires outwards so they are more flush with the fender-instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+® you can fill the gap in your fenders and GO WIDE!

TRAK+® Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+® Wheel Spacers are hubcentric and feature a full contact hub-just like the factory hub-for even load force distribution and lateral support.

Select applications now also available in black hard anodized.

Features:

  • Widen vehicle track with TRAK+® Wheel Spacers
  • Perfect fit hubcentric design
  • Durable lightweight aluminum/magnesium alloy
  • Affordable and easy to install
  • Bolt Pattern: 5/112
  • Center Bore: 66.5
  • Thread Type: 14x1.5
  • Spacer Type: DR
  • Width: 3mm
  • Bolt Type

Fitments:

1.  Mercedez-Benz
  • Mercedes-Benz S-Class
    • Mercedes-Benz S320 W140 95-99
    • Mercedes-Benz S320 W140 92-94
    • Mercedes-Benz S320 W221 -- 4Matic 06-13
    • Mercedes-Benz S320 W220 00-05
    • Mercedes-Benz S350 W221 -- 4Matic 06-13
    • Mercedes-Benz S400 W220 00-05
    • Mercedes-Benz S400 W140 95-99
    • Mercedes-Benz S400 W140 92-94
    • Mercedes-Benz S420 W220 00-05
    • Mercedes-Benz S420 W140 95-99
    • Mercedes-Benz S420 W140 92-94
    • Mercedes-Benz S450 W221 -- 4Matic 06-13
    • Mercedes-Benz S500 W140 95-99
    • Mercedes-Benz S500 W140 92-94
    • Mercedes-Benz S500 W220 00-05
    • Mercedes-Benz S550 W221 -- 4Matic 05-13
    • Mercedes-Benz S600 W221 -- 4Matic 05-13
    • Mercedes-Benz S600 W220 00-05
    • Mercedes-Benz S600 W140 92-94
    • Mercedes-Benz S63 AMG W221 -- 4Matic 05-13

Notes:

These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure to verify.

All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines:

a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:
Taper 60° End digit 01
Round head for M12/d24 mm, for M14/d28 mm End digit 02
Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
Flat head for Porsche original wheels M14 x 1.5 End digit 06

d) Safety guidelines 

(Minimum number of turns for wheel bolts / nuts):

M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1994-1998
Mercedes-Benz S320

Check out these other great products