VendorPromo Vorsteiner CAT
  See more parts for your Volkswagen Golf MK5

H&R Trak DR Series 5mm Wheels Spacer Pair Audi A4 Quattro AWD, Type 8E, 6 cyl 02-08



Model #1055571

In Stock

Help me decide

Shopper Award

Wider is Better®! H&R TRAK+® Wheel Spacers move your wheels and tires outwards so they are more flush with the fender-instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+® you can fill the gap in your fenders and GO WIDE!

TRAK+® Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+® Wheel Spacers are hubcentric and feature a full contact hub-just like the factory hub-for even load force distribution and lateral support.

Select applications now also available in black hard anodized.


  • Widen vehicle track with TRAK+® Wheel Spacers
  • Perfect fit hubcentric design
  • Durable lightweight aluminum/magnesium alloy
  • Affordable and easy to install
  • Bolt Pattern: 5/112
  • Center Bore: 57.1
  • Thread Type: 14x1.5
  • Spacer Type: DR
  • Width: 5mm
  • Bolt Type


1.  Audi
  • Audi A3
    • Audi A3 Type 8P, 2WD, 4cyl, TDI 05-up
    • Audi A3 Quattro Type 8P, AWD, 4cyl, 6cyl, TDI 07-up
  • Audi A4
    • Audi A4 2WD, Type 8E, 6 cyl, 4cyc 96-08
    • Audi A4 Avant 2WD, Type 8E, 6 cyl, 4 cyl 98-08
    • Audi A4 Avant Quattro AWD, Type 8E, 6 cyl, 4 cyl 98-08
    • Audi A4 Cabrio 2WD, AWD, Type 8H, 4 cyl, 6 cyl 02-09
    • Audi A4 Quattro AWD, Type 8E, 6 cyl, 4 cyl 96-08
  • Audi A6
    • Audi A6 2WD, 2WD, 6 cyl, 4F 95-11
    • Audi A6 Avant 2WD, 4F 06-11
    • Audi A6 Avant 2WD 98-04
    • Audi A6 Avant Quattro AWD, 4F 98-11
    • Audi A6 Quattro AWD, 4F 98-11
  • Audi A8 AWD, Quattro AWD 97-09
  • Audi RS4 AWD, 4.2 FSI Quatro, Cabrio AWD 01-08
  • Audi S4
    • Audi S4 AWD, Type 8E, V8 00-08
    • Audi S4 AWD, Type 100 92-94
    • Audi S4 Avant AWD, Type 8E, V8 00-08
    • Audi S4 Cabrio AWD, Type 8E, V8 04-08
  • Audi S6
    • Audi S6 AWD, V10 07-11
    • Audi S6 AWD 02-03
    • Audi S6 AWD 92-97
    • Audi S6 Avant AWD 02-03
    • Audi S6 Avant AWD 92-97
  • Audi S8 AWD 97-02
  • Audi TT
    • Audi TT Quattro AWD, Roadster, 2WD 07-up
    • Audi TT RS AWD 13-up
  • Audi TTS Quattro Roadster AWD, Quattro AWD 07-up
  • Audi V8 Quattro Type D11 89-94
2.  Bentley
  • Bentley Continental
    • Bentley Continental Flying Spur Type 3W 05-up
    • Bentley Continental GT 03-up
3.  Volkswagen
  • Volkswagen Beetle 2.5L, Turbo 2.0L 12-up
  • Volkswagen Eos 07-up
  • Volkswagen Eurovan Type T4 94-03
  • Volkswagen Golf V (Rabbit, Rabbit S) 2.5L, 1.9 TDI, 2.0L Turbo, GTI 06-09
  • Volkswagen Golf VI TDI, 2.5L, GTI 2.0 L, R 10-up
  • Volkswagen Jetta V
    • Volkswagen Jetta V 2.5L, 1.9 TDi, 2.0L Turbo 05-10
    • Volkswagen Jetta V GLI 2.0L Turbo up to vin #030983 06-07
    • Volkswagen Jetta V GLI 2.0L Turbo after vin #030984 07-10
  • Volkswagen Jetta VI GLI, S/SE/SEL 2.0L Turbo, 2.5L, TDI  11-up
  • Volkswagen Passat
    • Volkswagen Passat Sedan VR6, TDI, 1.8T, 2.0L, 4motion 06-11
    • Volkswagen Passat Sedan S, SE, SEL, 2.5L TDI, V6 12-up
  • Volkswagen Passat Wagon VR6, TDI, 1.8T, 2.0L,  4motion  06-11
  • Volkswagen R32 AWD 07-09
  • Volkswagen Tiguan Type 5N, 4WD 09-up


All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines:

a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:
Taper 60° End digit 01
Round head for M12/d24 mm, for M14/d28 mm End digit 02
Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
Flat head for Porsche original wheels M14 x 1.5 End digit 06

d) Safety guidelines 

(Minimum number of turns for wheel bolts / nuts):

M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure to verify.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

Vehicle Engine Notes
Volkswagen Golf MK5

Check out these other great products