Triple X Race Components Sprint Car Bolt Kit Complete Grade 8

Sprint Car Bolt Kit Complete Grade 8

All Triple X components are produced in our ISO 9001 certified factory. They are lab tested and outlaw proven, in the most strenuous of environments. Whether you are a new customer or a repeat customer, you can be assured that you're buying race-proven products at great prices.

Complete Sprint Car Grade 8 Bolt Kit. Includes everything you need to put together your Triple X Sprint Car. Packaged separately so you know exactly where they go and complete with a list of all of its contents. Each package is marked with its location and extra nuts and washers are provided. All Bolts are Grade 8 with Nylock Thin Nuts and AN Washers.Complete with Torque Tube Studs, Jacobs Ladder Pins with Springs and Clips, Perfect length Tail Tank Bolts, Lower Motorplate Bolts, Bell Crank, Pedals, Wings, Steering, Brakes, Front End, Engine Mounting to Chassis, Shocks, Radius Rods and More!

Don't be fooled by kits that sell for $69.99 . our kit does not contain any weak grade 5 bolts like other kits on the market have.

Package Includes:

• 1 Brake Pedal to Car 3/8 x 24 x 2"
• 2 Front Motor Mount to Chassis 3/8 x 24 x 1"
• 2 Rear Wing Tee to Wing 3/8 x 24 x 1 3/4"
• 2 Rear Wing Tee to Chassis 3/8 x 24 x 1 3/4"
• 2 Power Steering Bracket to Motorplate 3/8 x 16 x 1" SCS
• 2 Steering Clamp on Chassis 3/8 x 24 x 1"
• 2 Left Front Brake Caliper to Front End 3/8 x 24 x 1"
• 2 Upper Motorplate to Block 3/8 x 16 x 1 1/2"
• 2 Watts Link Straps to Watts Link 3/8 x 24 x 2"
• 4 Rear Motor Plate to Block 3/8 x 16 x 1 1/4" SCS
• 4 Motorplate to Chassis 3/8 x 24 x 2 1/2"
• 6 Torque Ball Housing to Motorplate 3/8 x 16 x 1" SCS
• 1 Throttle Pedal to Throttle Rod 10/32 x 5/8" SCS
• 4 Motorplate to Floorpan 10/32 x 3/4" SCS
• 16 Nerfs, Bumpers and Torque Tube 10/32 x 1 1/2" SSCS
• 1 Pitman Arm to Drag Link 1/2 x 20 x 2"
• 1 Tie Rod to Steering Arm R 1/2 x 20 x 2"
• 1 Tie Rod to Steering Arm L 1/2 x 20 x 1 3/4"
• 1 Drag Link to Steering Arm 1/2 x 20 x 2"
• 2 Upper Rear Shock to Chassis 1/2 x 20 x 2 3/4"
• 2 Upper Front Shock to Chassis 1/2 x 20 x 3 1/2"
• 2 Lower Front Shock to Axle 1/2 x 20 x 1 1/2"
• 2 Lower Rear Shock 1/2 x 20 x 2 1/2"
• 2 RF Steering Arm to Spindle 1/2 x 20 x 1 3/4"
• 3 Radius Rod to Axle 1/2 x 20 x 1 1/4"
• 6 Radius Rod to Chassis 1/2 x 20 x 2 3/4"
• 1 Wing Cylinder to Chassis 1/4 x 28 x 1"
• 2 Upper Steering Bracket to Chassis 1/4 x 28 x 1 3/4"
• 1 Bell Crank to Chassis 1/4 x 28 x 1 3/4"
• 2 Wing Valve to Chassis 1/4 x 20 x 3/8"
• 4 Front Posts to Front Wing 1/4 x 28 x 1"
• 1 Wing Cylinder to Wing Tee 5/16 x 24 x 1"
• 1 Master Cylinder to Pedal 5/16 x 24 x 2 1/4"
• 1 Throttle Pedal to Chassis 5/16 x 24 Nut
• 2 Rear Front Wing 5/16 x 24 x 1 1/4"
• 2, 1/2 Box Steering Bracket to Chassis 5/16 x 24 x 1
• 2 Master Cylinder to Chassis 5/16 x 24 x 2 1/2"
• 4 Pinch Clamps 5/16 x 24 x 1 1/2"
• 4 Tank to Chassis 5/16 x 18 x 7/8" SCS
• 1 Watts Link to Birdcage Pin (1/2 x 1 1/2") and Clip
• 1 Torque Tube Stud Kit (Studs, Nuts, Washers)
• 6 Studs, Washers and Nuts
• 2 Rear Arm Spacers 1/2" ID x 3/4" OD Cone
• 2 Watts Link to Chassis Pin (3/8 x 4"), Clip and Spring
• 2 Rear Caliper to Rear End 7/16 x 14 x 1 1/2"
• 5 10/32 Nylock 1/2 Nuts 10/32"
• 10, 1/4" Nylock 1/2 Nuts 1/4"
• 12, 5/16" Nylock 1/2 Nuts 5/16"
• 12, 3/8" Nylock 1/2 Nuts 3/8"
• 22, 1/2" Nylock 1/2 Nuts 1/2"
• 5, 1/4" AN Washers 1/4"
• 15, 5/16" AN Washers 5/16"
• 35, 3/8" AN Washers 3/8"
• 2, 7/16" AN Washers 7/16"
• 10, 1/2" AN Washers 1/2"

• Sprint Car Bolt Kit
• Complete
• Steel
• Zinc Oxide
• Triple X Sprint Car
• Sold as a Kit.

• Sprint Cars