BFCM Cat 2021 v1

Shop For Your Vehicle

Valve Springs & Guides



Performance Valve Spring

A valve spring is mounted around the valve stem and fastened by a bracket. Its primary role is to monitor the whole valve train, guaranteeing that the correct amount of spring pressure is continuously protected to detect the valve from bouncing. Since the valve bounce can contribute to massive failure, loss of power, and even rupture inside the valve, these springs have a vital function. Besides, a pressure valve spring often helps avoid the valve from floating or disconnecting between the camshaft love and the valve train that occurs when the engine's speed exceeds the valve's springs. The springs shield the axle, the cylinder walls, the pistons, and the engine bearings, as they cause the valves to close fully and secure the appropriate amount of compression. They also mean avoiding issues with hydraulic lifters, to operate towards oil pressure in the internal piston, and to prevent lifters from going upwards.

Symptoms of Bad Valve Spring

  • Tapping or Ticking Noise
  • Backfire
  • Engine Misfire
  • Compression Loss

Why Valve Spring Fails?

The broken valve spring in the engine can trigger several different drivability and performance issues. Also, damaged valve springs can cause increased valve noise, loss of compression, and internal severe engine destruction. The actual fracturing of the springs of the valve is not necessarily the most significant consequence.

Cracked Or Broken Valve Springs

The broken valve spring in the engine can trigger several different drivability and performance issues. Also, damaged valve springs can cause increased valve noise, loss of compression, and serious internal engine destruction. The actual fracturing of the springs of the valve is not necessarily the most significant consequence.

The behavior causes the most major harm to the engine following the rupture. When the valve springs break, they will break only enough to enable the valve to fall into the cylinder. Consequently, the piston can cause serious harm to the piston, the cylinder head, and other nearby parts.

What Causes Hydraulic Valve Lifters To Pump Up?

In comparison, the valve float may also cause the hydraulic lifter to "pump up." Hydraulic valve lifters have an internal piston assisted by oil pressure. The oil pressure drives the piston up. It allows the pushrod to stay tight against the rocker arm. This holds zero lashes in the valve train for quiet service. If the engine has a high float valve (RPM), it can encourage the lifters' pistons to rise slightly as they attempt to take off the valve train.

Why Does Valve Floats?

The valves will float when the valve springs can not keep up with the engine's speed. At high (RPM) (anything over 5000 RPM), the valves open and close very quickly. The camshaft spins at half of the speed of the crankshaft. So, at 5000 (RPM), the cam rotates at 2500 (RPM), moving the valves open more than 40 times a second!

So, if the valve springs are fragile, the springs can not force the valves all the way down until the next opening period starts. If the valves are not fully closed, the cylinders can lose compression, leading the engine to malfunction and lose control.

Valve Float Causing Burnt Valves

The valve float may also cause the exhaust valves to radiate heat, burn and fail. The exhaust valves are relaxed as the valve closes and settles on the seat of the valve. Now the heat is flowing away from the valve to the seat and the head of the cylinder.

If the car is operating at high speed and the engine valve is not completely mounted, the exhaust valves can overheat. This can cause the head of the valve to burn or crack. The burnt valve will spill compression, causing a steady fire in the affected cylinder.

How to Diagnose Valve Spring with the Use of a Vacuum Gauge?

If the engine runs at high speed and the valve is not fully sitting, the exhaust valves can overheat. This can lead to burning or cracking in the head of the valve. A burned valve will leak compression, causing a steady misfire in the affected cylinder.

Miles and engine temperature may lose their grip on the springs of the valve. The valve springs should have enough strength to maintain the valves closed and to hold the valve in place. Seat pressure is normally between 70-90 lbs. On the stock motor with an open pressure of 200 lbs. Or more of that. Poor valve springs can not apply a sufficient amount of pressure, causing malfunction and loss of control as the engine speed increases, resulting in a "float valve" where the valves struggle to shut. In extreme circumstances, the valve float may make it possible for the valves to touch the pistons on such engines, bending or cracking.

Why Switch to Vivid Racing?

From fitment help from our in-house experts to shipping packages, we'll take care of you and your order every step of the way. We know how much of a financial investment you're making in a set of wheels or accessories and upgrades, and in return, we'll deliver service and product that is second to none.

At Vivid Racing, we love cars. Cars are our vice in life. We love the automotive community and love our customers who think like us.

Finding a perfect aftermarket product is not an easy job. We fully understand it, and we are here to help you find the best modifications for your car.

We specialize in double takes! Our passion, simply, is helping you to build the car you always dreamed of. Everyone has their favorite look, color, effect, and desires, and we are here to help you achieve your goal.

Vivid Racing ensures that they meet the customer’s expectations regarding quality, size, and strength.

The company always provides quality aftermarket products for applications where you need speed and good looks, such as racing vehicles.

Vivid Racing carries high-performance parts for almost any need. Click these links to choose from our selection of Body Kits, Big Brake Kits, Seats, Custom Wheels and Tires, Engine Parts, Exhaust Parts, Intakes, Suspension, and Transmission Parts.

Buying from Vivid Racing is the best choice you can make. We back every part we sell with our guarantee of satisfaction.

Buy online or give one of our world-class sales professionals a call at 1-480-966-3040. If you don't see what you are looking for, Call Us.

We can help. Vivid Racing was voted #1 in customer service nationwide!

Hands-On Experience and Professionalism is what makes us the best.

LOOKING FOR OEM PARTS? We can help.
Are you tired of paying overly inflated prices that the dealers charge for their parts? Vivid Racing can save you up to 60% off the dealers' prices. Click here to visit our OEM PARTS STORE.