Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.Features:
WARNING: Cancer and Reproductive Harm
Willwood Engineering Inc. was formed back in 1977 by Bill Wood. The company is known for manufacturing a high-performance disc brake system.
Throughout the years, the company has continuously improved itself, along with the ever-changing advancement in-vehicle technology.
Today, the company had extended its wheel designs to supply brake components for various vehicles, including agricultural equipment, utility vehicles, motorcycles, four-wheelers, military vehicles, and even snowmobiles.
Wilwood has an extensive inventory of brakes parts for various vehicles. With over hundreds of brake calipers, master cylinder, and rotor designs, not to mention the tons of brackets, fitting, brake lines, and valves, it has the right kit for every vehicle application you can think of.
The company entails the most advanced technology and software in designing and manufacturing its products. They use a finite element analysis and multiple testing procedure such as a dynamic and cycle test that helps them replicate real-world conditions and adjust their design accordingly, making the necessary correction even before they manufacture the actual product
Using only the finest materials available, they can create a product that meets its clientele's expectation whether it's for street use or for race application.
Wilwood has also been ISO Certified, making it compliant to all mandated processing procedures set by the regulatory board.
Your brakes are the most important component of your car. It is easy to make your car fast, but you have to make sure you can equally make it stop as well.
Wilwood has the right product for you. With safety and quality at its core, they are the product you can surely trust. Visit Vivid Racing and check the list of parts that would fit your specific needs.
StopTech Sport Brake Pads with Shims/Hardware BMW 540i Front 2000-2003
EBC Brakes Greenstuff 7000 & Redstuff Premium Street Front Disc Brake Pad Set FMSI D499 Ford Crown Victoria Front 1992-1994 4.6L V8