Improve Reliability and hold Boost Levels Safely with a new kit from Forge
If you are serious about modifying your Fiat 500 Abarth or Dodge Dart, you will need to get rid of a few OEM components before diving in too deep. The factory re-circulation valve is a weak point in the turbocharged 1.4L that comes equipped in both of these vehicles. Forge has created a new product that is a direct bolt on that replaces these parts.
The new kit from Forge Motorsport is great for increased boost levels and helps to keep consistent boost under load. The design is up-rated and so are the internals / diaphragm. This also allows you to switch out springs which can be adjusted for your specific boost levels. The connector included makes everything a plug-and-play installation – including the wiring. Official launch notes and package contents are included below:
If you have any questions regarding Forge Motorsport products, please do not hesitate to contact us! We can be reached by phone at 1.480.966.3040 or via email at sales@vividracing.com!
Click here to view our entire catalog of Forge Performance products
Both of these valves are a piston design and are a direct replacement for the original fitment. Both valves give greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation the top or vacuum connection is angled.
Full kit includes:
- 1 x FMDVF14R Valve
- 1 x 2000mm of 4mm Vacuum Tube
- 1 x 500mm of 6mm Vacuum Tube
- 1 x Solenoid, Bracket, and Screws
- 14 x Cable Ties
- 1 x Uprated Blue Spring
- 1 x Aluminium Machined Coupler
- 1 x 4mm T Piece
- 1 x 6mm T Piece
- 1 x Wiring Harness
- 1 x 6mm-4mm Plastic Reducer
- 1 x M6 Nyloc Nut
- 1 x Instructions
- 1 x Forge Keyring and Sticker
| FMDVF14R |  |
Forge Motorsport Recirculating Valve Kit Fiat 500 Abarth 09-17 | $260.00 |  |
| FMDVF14R | |
Forge Motorsport Recirculating Valve Kit Dodge Dart 13-16 | $260.00 | |
