View Belltech Catalog Here
Since its release, the new Jeep Gladiator has been put through the ultimate test from hauling, off-roading, and just standard daily driving. Naturally, trucks are lifted in the rear to compensate for the squat caused by a load being put over the rear of the vehicle.
For those that do not plan on towing, this can be ODC inducing being that the truck does not sit level. Belltech developed a leveling kit for the Jeep Gladiator JT to combat this issue and allow owners to have dialed ride height all around. Utilizing a coil spring spacer, the leveling kit is simply installed under the spring giving the front suspension a 2.5″ lift to level with the rear.
Belltech also offers a front and rear coil spring spacer that raises the overall ride height 2.5″ inches. The benefit of elevating the vehicle or just leveling is the option to run a larger wheel combination up to 35″ with no modification necessary. The coil spring spacer kit from Belltech is all you will need to achieve this safely without the need for an expensive lift kit which can require modification.
Click Here To Purchase Your Belltech Leveling Kit!
Features:
- 2.5″ front lift for leveling option
- 2.5″ front and rear lift option
- Max wheel backspace – 4.5″
- Safe and economical coil spring lift solution
- Permits the use of larger wheel and tire combinations
- Appropriately extended length shocks are recommended
- Direct bolt-in, no additional modifications
- Installation time: 4-5 Hours (plus alignment)
- Installation Instructions included
If you have any questions, please contact us. You can reach us by phone at 1-480-966-3040 or via email at [email protected].
Front and Rear 2.5″ Lift – 34862
Front 2.5″ Leveling Kit – 34861
Before:
After:
