Edge Juice Module Dodge 5.9L 610 Series 2006

Free Ground Shipping for Online Orders

The Juice module is an add-on Engine Control Module for the Cummins Engine that offers additional features not available with the factory setup. Since it is an add-on ECM, it uses all the factory data and then enhances the factory settings to optimize your truck’s performance.

The Juice features engine temperature monitoring and power increase from the Juice module as engine reaches operating temperature. With three selectable power levels via an in-cab position switch, the Juice module offers a large power increase over stock throughout the RPR range, but the power is more noticeable in the midrange RPM’s. This greatly improves driveability and towing performance. Transmission downshifting is greatly reduced, especially while passing or towing.

The Juice also regulates power delivery and timing based on engine temperature. This means that while the engine temperature is below 140 degrees Fahrenheit, no additional fueling or timing is delivered. Over 140 degrees, the module begins delivering fuel at 25% of the calculated additional fuel, and the percentage increases, until at full engine temperature the Juice delivers 100% of the calculated additional fuel. At full engine temperature the Juice also starts modifying timing.

The Juice alone provides the following power gains with an in-cab toggle switch:
Level 1: 25 Horsepower - 80 Foot Pounds of Torque
Level 2: 40 Horsepower - 120 Foot Pounds of Torque
Level 3: 80 Horsepower - 200 Foot Pounds of Torque
When the Juice module is used without an Attitude or A2 monitor the Juice will NOT read EGTs.

NOTE: EJD3000B and EJD3000BWAM: This unit will NOT work on trucks manufactured after June of 2006.

Fits: Dodge Cummins 5.9L 610 Series