Known for its power and performance, the Chevrolet Corvette (C8) is the eighth generation of the Corvette that has been a source of joy for many car enthusiasts. This impressive vehicle is beautifully designed for astounding performance as it is the sum of everything that’s come before it. Most enthusiasts would say this is the most superior Corvette family generation to date. This all-American sports car gives an excellent driving experience in its OME state but lacks that traditional growl you should hear from a 6.2L V8. A simple exhaust system modification will give your C8 Corvette a better and more fulfilling sound along with some performance gains. At Vivid Racing, we have several exhaust options that are the best options for your Chevrolet Corvette (C8). Click the link below to choose from our shop, or keep reading to see the exhausts we recommend for a better-sounding and higher-performance. We also included sound examples from each manufacturer, so you can gauge which sound is best suited for your vehicle.
Purchase an Exhaust System for Your Corvette C8 Here
1. VR Performance Corvette C8 Titanium Valvetronic Exhaust System
Made by VR Performance, which is known for its reputation for making products that unleash the true potential of your ride in terms of aesthetics, power, and functionality, this exhaust system is unlike others in the market. The VR Performance exhaust works perfectly with your OEM exhaust valves, allowing you to keep your Corvette quiet in the neighborhood or let it scream on the road. The titanium mufflers offer a deep, v8 exhaust note without any drone on the highway or streets. You should also know that this exhaust system is lightweight, easy to install, and has an increased piping diameter which guarantees to increase the horsepower of your C8 Corvette. Learn more about VR Performance exhaust HERE.
What does the VR Performance Exhaust for the C8 sound like? Listen to it in the video below.
2. Paragon Performance Track Exhaust
Located in Waukee, Iowa, Paragon Performance creates affordable products while focusing on performance. Paragon Performance focuses on developing parts for some of the best sports cars on the market, including Porsches, Corvettes, and other exotic vehicles. Made in the USA, Paragon Performance C8 Corvette Catback Track Exhaust is an in-house designed long tube exhaust system, unlike others out there. This unique system follows the car’s lines, mimicking the subframe line, flowing into an X pipe, then traveling through two straight pipes which sit centered behind the rear bumpers grille. Constructed from 3″ mandrel-bent 304 stainless steel tube for longevity and strength, Paragon tested this system on and off-track to ensure it can take any driver’s abuse. Learn more about the Paragon Performance Track Exhaust for the C8 Corvette HERE.
What does the Pagagon Performance C8 Exhaust sound like? Listen to it in the video below.
3. Borla S-Type Cat Back Exhaust System
The name Borla has become synonymous with performance in the aftermarket exhaust industry. Borla took great care in manufacturing their exhaust system to ensure the integrity and function of the system and the vehicle itself. The S-Type sound level delivers an aggressive yet balanced sound with a deep tone. It provides a more exciting driving experience without any drone. It features Polyphonic Harmonizer and SwitchFire technology. Borla’s Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, there is also a strategically placed heat shielding included to prevent exhaust heat damage and protect your Corvette. The system is constructed using T-304 stainless steel, and you get to choose your 4″ Tip between Chrome, Black Chrome, and Carbon Fiber.
Take a listen to what the Borla S-Type system sounds like in comparison to the Borla ATAK C8 System and Stock.
Learn more about the Borla S-Type Cat Back Exhaust System for the Corvette C8 HERE.
4. Akrapovic Titanium Slip-On Line Exhaust System
Akrapovic is a Slovenian manufacturer of exhaust systems, founded in 1990 by Igor Akrapovic. The brand is currently synonymous with performance, and it was initially born to fill a need for high-quality exhausts. Their exhaust for Corvette C8 has been designed to deliver performance, exhilarating sound, and driving enjoyment, with no compromise on comfort. With a perfect throttle response and a power increase of 3.4 kW (4.6 hp) at 5,250 rpm and a torque gain of 8.2 Nm at 3,100 rpm, this exhaust is more than 47% lighter than the stock sport exhaust. The exhaust is tailored to control the gas flow from the engine and provide a perfect sound: a V8 throb at low revs, which gradually evolves into a rich roar as the revs rise, creating an aural delight. The two tubes that connect the left and right sides of the system have different diameters to provide increased stiffness to the design and enhance the overall sound experience. The tubes are also fully insulated to prevent any excess heat from affecting other parts of the car. This exhaust is one of the best in the market to provide you with a better-sounding Corvette C8.
Take a listen to what the Akrapovic Titanium Slip-On Line Exhaust System sounds like on a C8.
5. Fabspeed Supersport X-Pipe Exhaust System Polished Chrome Tip
Fabspeed is an aftermarket company with roots in the automotive industry that extend deeper than 25 years. Fabspeed specializes in creating high-quality and high-performance parts for various vehicles. They have made a name for themselves by providing components for some of the industry’s hottest exotic cars. The Fabspeed Supersport X-Pipe Exhaust is the ultimate cat-back setup for your C8 Corvette. This complete 3-inch system will wake up your LT2 engine like no other exhaust out there; with its authoritative rumble at idle and cruising speeds, no one will mistake your exhaust note for the pedestrian stock system. The X-pipe design gives the LT2 motor a distinct exotic growl, and it weighs just 41lbs less than the factory cat-back system. Its installation is easy as no cutting or welding is required, only direct bolt-on installation.
What does the Fabspeed Supersport X-Pipe System sound like on the C8? Take a listen below.
6. aFe MACH Force-XP Catback Exhaust System w/ Black Tips
Based in Corona, California, AFE, also known as advanced FLOW engineering, is considered a premier manufacturer of aftermarket performance products. AFE started in 1999 and has built a reputation in the aftermarket industry for manufacturing quality automotive upgrades such as racing air filters, air intake systems, exhaust systems, turbochargers, intercoolers, electronic programmers, and throttle-body spacers, diesel fuel systems, and other performance parts. Their C8 exhaust is no exception to their heritage. This cat-back exhaust system is constructed of 3″ – 2½” mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system produces an aggressive sound unleashing all available horsepower and torque. The exhaust is a bolt-on system requiring no cutting or modifications for a hassle-free installation. This aFe Mach Force-XP Cat-Back Exhaust System uses a heavy-duty flex pipe with an internal interlock liner for added strength and durability. The Mach Force-XP was designed utilizing state-of-the-art computer-aided design technology.
What does the aFe MACH Force-XP Cat-Back Exhaust System sound like? Take a listen below.
7. ARMYTRIX Stainless Steel Valvetronic Exhaust System Quad Carbon Tips
Armytrix is a relatively young exhaust company that offers quality and affordable Valvetronic exhaust systems. Enhance your Corvette C8 with their Stainless Steel Valvetronic Quad Tip Exhaust, as this system will increase power, reduce weight, and of course, improve the sound quality. This precision-made performance system delivers more power, especially in the low to mid-rev range. The effect on the sound is significant. Adding deep, resonant, sporty sound while neutralizing the annoying frequencies in the most critical rpm range. ARMYTRIX exhaust systems set themselves apart from the rest by providing lots of customing options that are available at the driver’s discretion. This is managed via the ARMYTRIX app that can connect to the C8’s OBDII port via Bluetooth. From the app, the driver has the option to control the exhaust’s Valvetronic system and manage when the valves automatically open and close. This can all be pre-set to the desired RPM range or throttle position. If all of that is too technical, there is the option to just open and close the valves from the included remote. This small remote gets mounted inside the cabin when the exhaust is installed for full, manual control.
What does the Armytrix C8 Stainless Exhaust System sound like? Take a listen below.
8. Stainless Works Redline Series Catback Exhaust System w/ Matte Black Tips
Stainless Works is an industry leader in stainless steel performance headers and exhaust systems. The company offers long-lasting, rust-free performance with good looks to boot, which are proudly USA-made. With this Stainless Works Redline Exhaust System, you can improve the sound and performance of your Corvette C8 as they have engineered a drone-free aggressive muffler tuned specifically for the 6.2L engine. This system features an X-pipe, tuned mufflers and quad 4½” matte black slash-cut double wall tips. This system includes high flowing 3″ valve replacements for the AFM and Mode Switching electronics. Your Corvette will retain all valve functionality of the stock exhaust but with increased flow and improved sound. This kit is built from corrosion-resistant 304 stainless steel, and the headers are TIG welded for strength and durability. Stainless Works also has headers and high-flow cat options for the C8 system. You can check those all out HERE.
What does the Stainless Works Redline Exhaust System for the C8 sound like? Take a listen to it in the video below.
