Performance Crankshafts



Why Should I Install a High Performance Crankshaft?

Among all the moving parts of the engine, the crankshaft is the largest and the heaviest. And, quite possibly, the strongest. There is no doubt that the crankshaft is the foundation on which the combustion engine is built.

The term 'crankshaft' goes back to the early 20th century, when the car engines were started with a crank handle, and the crankshaft was actually spinning with a hand crank. The crankshaft is found below the cylinders of a vehicle’s engine. On V-type engines it is found at the base but on flat engines it is found between the cylinder banks. Inside each cylinder is a piston which moves up and down the cylinder. All the engine’s pistons are connected to the crankshaft by individual rods. The crankshaft’s main function is to transform the linear motion of the piston into rotational motion. The pistons are connected to the crankshaft through the connecting rods. The crankshaft is mounted within the engine block.

On stock engines, the crank is a component that rarely gets stressed. But in high horsepower, high-performance applications and racing, crankshafts have to be made above and beyond the OEM standards. Companies like Scat Enterprises, Eagle Specialties, Cosworth, and Tomei Crankshafts all offer an array of choices - everything for torque-happy street powerplants and show car engines to all-out race pieces.

What Crankshaft Should I Run For More Power?

For forged alloys, such as 1045 carbon steel stock cranks and 5140 and 4340 chromium-moly cranks, the total strength is significantly improved. The most popular in the high-performance world is 4340 chrome-moly and is considered to be the best in terms of nickel and chrome content. At the highest level, what you would see in most heads-up racing cars and wild power adder applications is bill 4340 steel, which is considered to be the strongest and most expensive. Billet cranks are literally carved out of a solid piece of steel.

The crankshaft that has been cut by the pendulum is one where the counterweights have been slotted to reduce weight. In the same vein, the companies offer cranks with a star flange: lightening of the back of the crank, where the contour is machined around the flexed flange bolts. To lighten the crank even further, gun drilling is an option where the crank is drilled through the center. Knife edging is another option where crank counterweights feature a sharpened end that reduces winding and weight as well.

Cryogenic treatment, for example, is a super-freezing process (-300 degrees) that modifies the microstructure (outer layer of metal) of the crank. This is also common on stock cranks, as it relives any internal stress risers in the metal. It modifies it enough that a piece that's been cryo-treated will machine differently.

Eagle Specialties offers a unique process of their cranks called ESP Armor, which is a slick finish that they claim improves power by reducing windage. Nitriding is a treatment that uses ammonia and nitrogen and intense heat to modify the carbon of the crank, again, to ensure longevity at the most intense levels of output.

When building or rebuilding your high performance engine, a performance crankshaft is a must. Performance crankshafts can handle the higher horsepower applications and are designed to be perfectly balanced. Nothing can ruin your day at the track or on a cruise than a broken crank. Vivid Racing carries performance crankshafts for most high performance engines. So put one in your cart.

Buy online or give one of our world-class professionals a call at 1-480-966-3040.