J's Racing S-Tai HQI Front Hub was developed from valuable experience at the Super Taikyu (Endurance race series). When your S2000 is driven to it;s limits for a long duration of time, the overall "load" and the high surface temperatures that can become as high as 800C, to the hubs (especially rear) will frequently damaged the stock hubs. In order to solve this problem, J's Racing designed a super strong hub by applying High-Frequency Induction Hardening (HQI) to the stock hub. This application will assist you in surviving a 24 hour race without any incident. After numerous tests and trials, J's Racing has perfected the process for your stock hub.
High-Frequency Induction Hardening (HQI) is a heat treatment method where the only necessary areas of material are exposed to the rapid heat and cooling. This process creates an extremely hard surface without affecting the internal areas.
- Size: M12 x P1.5
- Extension: 10mm
- Spline Diameter: 12.3mm
- Total Length: 71mm
- Press work is required to install one hub assembly.
- Hub bearings cannot be reused. Please prepare a new hub bearing separately.
- Follow the specified torque and install correctly.
- After installation, check the bolts and nuts for tightening periodically. Please do it every time before running on the circuit.
Started in Osaka Japan, our specialty has always been tuning and developing the performance parts for Honda vehicles. We also actively host track events for our customers and participate in several race series. All of our products and tuning menus are the fruit of the countless test and research on the actual race tracks and test courses. It has been our philosophy that only the products which meet or exceed the very high standard set by us are to be released to the market We believe it is this philosophy which results in the worldwide popularity of our products from the North America, Asia, Oceania, and Europe.