Camburg Gen 2 Long Travel Kit Chevrolet | GMC 1500 1999-2006

The Camburg long travel Silverado kit is a huge upgrade in suspension performance. To start we made a fully fabricated spindle, a boxed lower arm with internal gusseting, In our new Gen2 coilover/bypass design we have the lower shock mounts sunk into the arms. We also have available a weld-on bucket style shock mount that is setup for a 2.5 x 8" coilover and a 2.5 x 8" bypass shock. 1"Uni-Ball lower pivots for the lower A-Arms and 3/4" heims for the upper arm to pivot off of. The factory ball joints were changed out to 1" Uni-balls upper and 1.5" lower. Others will mount there 1" uni-balls single sheer, this is not as strong as the "double sheer" mounting we do upper and lower. There are 2x 1.5" uni-balls 6x 1" uni-balls, 2x 7/8" heims, and 6 3/4" heims in the system. The total of these parts with spacers and hardware is over $1500, this is why our kit LOOKS expensive but you just get what you pay for! You will need a set of Fiberglass fenders to make room for your tires.

This kit is for the serious offroader and requires extensive fabrication. We recommend a qualified off-road race shop to install and setup this suspension system.

What's Included:

• Boxed lower arms
• Heim UCAs
• Fabricated race spindles
• Full heim steering
• Limit straps
• SS Brakelines
• Powdercoated Camburg grey

• Lift: 4-6 in
• Wheel Travel: 15-16 in
• Track Width: +5 in per side
• Wheel Size: 16-17 in x 8-9 in
• Max Backspacing: 4.75 in
• Tire Size: 35-37 in

• Chevrolet | GMC 1500 2wd 1999-2006

• Coilovers, Bypass Shocks, Shock Mounts & Bump Stops are not included