Name: Fleece Performance PowerFlo Lift Pump and Fuel System Upgrade Kit Ford Powerstroke Short Bed 2011-2016
Brand: Fleece Performance
SKU: 156580874
Price: 1129.00 USD
Availability: InStock

The PowerFlo lift pump is the latest drop-in lift pump from the diesel experts at Fleece Performance! Needing to replace your factory pump or looking to upgrade? This kit includes both the PowerFlo lift pump to replace your in-tank factory sending unit and a new frame mounted filter base with Donaldson filter to replace the factory pump and filter assembly. Our plug-and-play kit requires NO cutting, splicing, or modification of the factory fuel lines or fuel tank and the new filter base mounts in the OE filter housing location. Combine this kit with our replacement under hood filter base (FPE-FMC-UHFA-1123) and optional fuel heater (FPE-FH-FMC) for the ultimate fuel delivery setup on your 6.7 Powerstroke!

Features:

Direct In-Tank Replacement: The PowerFlo lift pump retains the factory fuel lines, water-in-fuel sensor, and installs in less than half the time of other high flow lift pumps.
Ultra-Quiet - Dual Gerotor: Two is always better than one, and the PowerFlo delivers with two industry proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 HP!
Seamless Integration: The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need. This kit requires no cutting, splicing, or modification of the existing fuel lines, harness, or fuel tank and retains all factory diagnostic functionality.
Aftermarket Capable: Want the benefits of the in-tank pump but need to run your own fuel lines? The pump outlet and return are threaded to accept a -8 O-ring fitting (3/4"-16 thread). This product has also been tested and verified with 2011-2016 trucks equipped with and S&S Diesel Motorsport DCR conversion kit and the S&S Diesel Motorsport CP4 Disaster Prevention Kit.
PowerFlo Lift Pump with integral fuel level sender
Filter base with Donaldson (P/N P553203) and provision for optional fuel heater (4 micron rating at 99% efficiency)
Water-in-fuel sensor
Chassis wiring harness and WIF sensor extension harness
Fuel sending unit tank O-ring
Mounting hardware

Install Instructions:

For Instructions CLICK HERE

Fitment:

Ford Super Duty 250 6.7L Powerstroke 2011-2016
Ford Super Duty 350 6.7L Powerstroke 2011-2016
Ford Super Duty 450 6.7L Powerstroke 2011-2016

Note:

Replaces FORD OE Part Number: (FPE-FMC-1116-SB) BC3Z-9A299-A 2011-2016
Replaces FORD OE Part Number: (FPE-FMC-1116-LB) BC3Z-9A299-G 2011-2016
Operating pressure of: 65-70 psi at idle
This product has been tested and verified to work with 2011-2016 trucks equipped with an S&S Diesel Motorsport DCR conversion kit and the S&S Diesel Motorsport CP4 Disaster Prevention Kit.
This product has been confirmed to fit Titan and S&B aftermarket fuel tanks.
Protected under US Patents Pending

Proposition 65

$/!\ warning$ WARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Make Vehicle	Model	Year
2016-2024 Ford F-250 Super Duty	F-250 Super Duty	2016-2024
2016-2024 Ford F-350	F-350	2016-2024
2016-2023 Ford F-450	F-450	2016-2023

Who is Fleece Performance?

Fleece Performance is an aftermarket company established in 2008 in North Salem, IN, by Brayden and Chase Fleece. The company is known for manufacturing performance parts for various diesel engines. Today, Fleece Performance is the leading brand in the market when it comes to diesel aftermarket parts.

Diesel Performance Parts Experts

The company’s founders Brayden and Chase, are fellow enthusiasts themselves. They decided that they wanted to improve the products already existing in the market. Using their vehicle as their product’s testbed, they created some of the best parts available today. As a result, they have established a reputation as a brand that provides innovative products that pushed the limits of diesel performance technology.

Quality Made Products

The company offers a wide range of turbochargers, AN Fittings, Fuel system parts, and cylinder head kits. They cater to a variety of automotive brands such as Ford, Dodge, and Chevy. Each product is carefully designed to produce optimum performance and is developed, assembled, and tested in their in-house facility.

The company received its ISO certification in 2020, which shows that the company adheres to the strict standard set by the regulators.

Purchase Fleece Performance Products At Vivid Racing

If you are in the market for high-quality diesel performance parts, then Fleece Performance is the brand for you. They have been manufacturing quality parts for more than ten years and has gained the trust of many diesel enthusiast and racers alike. To know more about Fleece Performance, visit Vivid Racing and check out their list of products that fit your specific need.

Fleece Performance Engineering develops and manufactures performance productsfor the diesel automotive industry. Throughout the design, validation, and manufacturing process our products are tailored to the high performance diesel community. We understand that the high performance industry will inherently push hardware to its failure point.We stand behind our products and are confident that when integrated in the appropriate application they will live a long and successful life.

LIMITED WARRANTY ON NEW FLEECE PERFORMANCE ENGINEERING PRODUCTS (US AND CANADA ONLY)

Fleece Performance Engineering will provide for repairs or replacement, at its option, during the warranty period of each new product model listed on page 2 in accordance with the following terms, conditions, and limitations: View HERE