Nitro Gear and Axle now offers an assortment of Heavy Duty Cut-to-Length (CTL) rear axle shafts. The CTL axle shafts feature extra Long splines and can easily be cut to the desired length with a chop saw. This allows Nitro to use stronger rolled splines rather than cut splines and allows fewer part numbers to cover a wide range of OE and custom fits. This also makes it easier for Offroad, restoration, and Rod Shops to stock axles since they fit so many Fits.

Features:

Nitro axles are heat treated after splines are cut. Most custom axles have the splines cut after heat treating, removing heat treated metal from the spline section of the shaft.
Trim to desired length
30 spline axle
Compatible with ABS
Differential: Toyota 8 Inch
Length: 29.25 Inch
Axle Splines: 30
Type: Semi Float
Bolt Pattern: 6 x 5.5 Inch
Material: 4140 Chromoly Steel
Warranty: 5 Years

Tech Note:

These axles are correct length for the Fits listed above. In addition they can also be used in custom fits as a cut-to-length axle.
Uses Axle Bearing and Seal Kit AKTOY (2 req. per axle)

Fitment:

1995 1/2- 2004 Toyota Tacoma
1996-2002 Toyota 4Runner

Proposition 65

$/!\ warning$ WARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Make Vehicle	Model	Submodel	Year	Engine	Notes
1996-2002 Toyota 4Runner	4Runner		1996-2002
1995-2004 Toyota Tacoma	Tacoma		1995-2004

Nitro Gear

Name: Nitro Gear & Axle Rear Axle Shaft Toyota Tacoma 4x4 | Pre-Runner 1995.5-2004
Brand: Nitro Gear & Axle
SKU: 156074748
Price: 207.00 USD

Gears and axles are two of the most overlooked components in any car. Low-quality gears and axles can lead to poor performance and lower fuel economy, so it is important to give your car the upgrade it needs with Nitro Gear and Axle products. Vivid Racing carries a variety of Nitro Gear products, allowing you to optimize your car's performance and efficiency.

What Is Nitro Gear?

Founded in 2006, Nitro Gear specializes in creating unique and superior applications for the axle and differential industry, crafting custom products to meet the ever-changing needs of consumers. Nitro Gear parts are always on the cutting edge of the industry, using the latest and greatest technology to improve driving performance.

What Separates Nitro Gear From the Competition?

While Nitro Gear and Axle has only been in business for around 15 years, they have quickly shot past the competition to earn a reputation as the very best gear and axle manufacturer currently on the market. Below, learn more about what separates Nitro Gear parts from the competition.

Better Materials, Machining, and Processes

Nitro Gear products have earned a place in the top tier of the industry because they never settle for subpar materials. All Nitro Gear parts use only high-quality materials, the best available machining, and superior lapping and heat-treating processes.

Multi-Point Inspection Process to Ensure Long-Lasting Products

With any product, you need a thorough inspection process to make sure no bad apples slip through the cracks. Nitro Gear has a multi-point inspection process to make sure all of our products are durable and ready for any challenge. We want Nitro Gear products to last, and that is why we offer a warranty to cover any manufacturer defects.

Easy Setup

You do not have to be an engineering expert to set up our products. We strive to make simple and straightforward products, allowing for easy setup and installation.

Nitro Gear and Axle Products From Vivid Racing

If you are looking for gear or axle products, Nitro Gear has everything you need. Vivid Racing has partnered with Nitro Gear to offer customers all of the best Nitro Gear products at an affordable price. If you are interested in upgrading your gear and axle, contact Vivid Racing today by calling (480) 966-3040.

All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.