RTR Vehicles Performance Lowering Springs Ford Mustang GT with Magneride 2015+

Improves Handling Performance
Upgrading to a set of Ford Performance Lowering W-Springs will lower your 2018-2023 MagneRide equipped Mustang's center of gravity, which will help to reduce squat during acceleration, body roll in the corners, and excessive nose-dive under hard braking. Ford's W-Springs are ideal for daily driving, street, and even occasional track use. Please note that the ride quality may be slightly harsher when compared to your original factory springs.

Aggressive Stance
Not only does a set of Ford Performance Springs improve the handling performance of your Mustang, but they also improve its overall appearance. By lowering the ride height approximately 0.78 inches (20mm) both front and rear, that huge tire to fender gap is eliminated, providing your Mustang with an aggressive muscular stance.

Linear Design
Linear springs (also known as standard rate springs) are engineered with a constant spring rate that stays the same as the spring compresses. This linear rate of compression allows for optimum traction and more predictable handling feel at both low and high speeds. Linear springs will have a slightly rougher ride when compared to progressive springs. Linear rate springs are a popular choice for track and road course driven Mustangs.

Clears Stock and Aftermarket Wheels & Tires
These lowering springs were engineered to be compatible with your factory size wheels and tires to assure proper clearance with no rubbing issues.

Professional Installation Recommended
Seeing that a spring compressor is required for installation of these Coil Springs, RTR Vehicles recommends professional installation. With the proper tools, installation can be completed in about three hours. Please note that an alignment is highly recommended after installation.

Application
This set of four Ford Performance W-Springs is designed specifically for use on the Shelby GT350 and GT350R models, as well as the 2018-2023 GT Models equipped with the MagneRide Suspension.
Application Note
These Springs are not intended for use on Non-MagneRide equipped vehicles.

Features:

• Aggressive Muscle Car Stance
• Lowers Center of Gravity for Improved Handling
• Standard Linear Spring Rate
• Blue Powder Coated Finish
• Estimated Drop: Front - 0.78 Inch; Rear - 0.78 Inch
• Clears Stock and Aftermarket Wheels & Tires
• Professional Installation Recommended
• Sold as a Set of 4 Springs
• Compatible on MagneRide Equipped Vehicles
• Fits 2015-2018 GT350, GT350R and 2018-2023 GTs with MagneRide Suspension
• What's in the Box:
  • (2) Rear Springs
  • (2) Front Springs
• Installation Time: (approx.) 2 Hours
• Difficulty Level:Light to Moderate mechanical skill required