Upgrade your Nissan 370Z with a new Stillen body kit! This aftermarket body kit features an unforgettable look with components that are modeled after Steve Millen's award winning IMSA 300ZX and the Stillen Targa Newfoundland GT-R. Not only does this Nissan 370Z body kit look great, but it is also practical with a multi-piece design that helps direct cool air to your engine for better cooling and improved performance. You can't go wrong with the Stillen Nissan 370Z body kit!
Perfect Fit Enjoy a perfect fit with this aftermarket body kit for the 370Z! It was specially designed to have clean, aggressive styling that utilizes factory mounting points. This helps ensure that it fits and flows with the cars original lines
6-Piece 370Z Body Kit The Stillen Nissan 370Z body kit comes with six body components, including a front fascia, modular side vents, side rocker panels and deck wing. Each piece is made of urethane and is ready for prep and paint right out of the box.
Clean, Aggressive Styling Each of the pieces found in this body kit feature a clean, aggressive look that is the perfect complement to the Nissan 370Z design. Additionally, each of the body components is designed to contours of the vehicle.
Nissan Quality Aftermarket Body Kit This Stillen body kit features direct molding Polyurethane construction. You can be assured you're getting OE quality and strength that is backed by a Stillen limited lifetime warranty against cracking or breaking under normal use.
Performance Minded Design Unlike some body kits, the Stillen Nissan 370Z body kit is designed to not only make your car look good, but make it faster too! The front fascia features a multi-piece design that is compatible with the Stillen brake duct cooling kits and includes large open areas that allow space for an intercooled supercharger, oil cooler and transmission cooler. Additionally, the modular vents work with the Stillen brake cooling kit. Finally, the deck wing and the side rocker panel borrow design concepts from race cars the Stillen team has built. Other than looking good, the goal of these body components is to make the design of the car more efficient and help improve planting and stability of the car.
Improved Cooling The Stillen front fascia that is included in the 370Z body kit not only offers you a custom look, but it also helps improve the performance of your sports car. The Stillen designers substantially increased the size of the factory grille and incorporated a cut right above the main grill openings to allow for better cooling. For best performance results use with the Stillen Gen3 intakes.
Made in the USA Each of the urethane body components found in the Stillen body kit for the Nissan 370Z are prototyped and molded in USA at Stillen headquarters in Costa Mesa, CA.
Features:
Kit Includes Stillen Front Fascia (KB11121)
Kit Includes Stillen Side Skirts (KB11125)
Kit Includes Stillen Mesh Grille Insert (B11121LG)
Kit Includes Stillen Rear Wing (KB11123)
Kit Includes Stillen Roof Wing (KB11124)
Polyurethane Construction - Ready for Prep and Paint
Developed and Manufactured In-House
Vehicle Specific Application
Limited Lifetime Warranty
Beautiful flowing design that modernizes the stunning 370Z.
Front Bumper is opened up for the best cooling and aggressive looks.
Rocker Panel Side Skirts are nicely touched with a unique sharp cut design
Tight Honeycomb mesh grille inserts help block harmful on-coming debris.
Rear hatch wing helps the rear of the car to stay planted and increase more down force for better traction.
Roof spoiler adds an aggressive style to the rear window and provides less air turbulence for the rear wing.
Stillen is an aftermarket company founded by Steve Millen. Steve is a professional race car driver with 30 years of experience under its belt.
Using his racing experience, he built a company that would, later on, revolutionized the aftermarket industry. Stillen parts can be found in every performance and tuner cars in the market and have been a household name in the tuning industry even up to this day.
Proven Formula
Steve Millen has been chosen by various media platforms to conduct vehicle testing of some of the most high-end and powerful sportscars. This allowed him to get vital information on how to improve and bring out every car’s potential.
Comprehensive Product List
Stillen is a company that focuses on putting performance in every vehicle. Hence, no part is left untouched. If changing a particular part would improve the vehicle, then Stillen would have an upgrade for it.
They offer parts ranging from engine components, drivetrains, forced inductions, intercoolers, radiators, electronics, suspension parts, brakes, and even body kits. They are basically a one-stop brand for those who want only the best performance parts in the market.
Purchase Stillen at Vivid Racing
Stillen has been improving vehicles for decades, cementing its status as the industry leader and has become an aftermarket icon. They have created some of the best cars in the world and are continuing its tradition of producing parts that perform well on the street and on the track. Visit Vivid Racing and check out the list of parts that would fit your specific requirements.
WARRANTY INFORMATION:
Exhaust:
The manufacturer warrants that all SMSP Exhaust Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuses or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number. SMSP acknowledges that parts may be discontinued. If the exhaust product has been discontinued, SMSP may not be able to offer a replacement option.
No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.
This warranty does not extend to cosmetic blemishes and/or finish deterioration. Stainless steel does require cleaning and maintenance to retain its finish. Failure to do so can result in surface corrosion which is not covered by warranty.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Stainless Steel Systems: Limited Lifetime Warranty against manufacturing defects and rust through.
Intakes:
The manufacturer warrants that all SMSP Air Intake Products are free from defects. Most of our intake products are warranted against failures and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the air intake products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any air intake product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the intake product, or any participating dealer, when making a claim for replacement. The original air intake product must also be returned and exchanged for a new air intake product of the same part number. SMSP acknowledges that parts may be discontinued. If the intake product has been discontinued, SMSP may not be able to offer a replacement option.
No other warranty, expressed or implied (including merchantability), applies to the air intake product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the air intake product, or inconvenience or interruption in any operation.
This warranty does not extend to cosmetic blemishes and/or finish deterioration. SMSP air intakes are manufactured out of various materials each requiring care and maintenance. SMSP does not guarantee that these finishes will not deteriorate with age and use and this deterioration may be accelerated with neglect and misuse.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Sway Bars:
The manufacturer warrants that all SMSP Sway Bar Products are free from defects. Most of our Sway Bar products are warranted against failures and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the Sway Bar products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any Sway Bar product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the sway bar product, or any participating dealer, when making a claim for replacement. The original sway bar product must also be returned and exchanged for a new sway bar product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the sway bar product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the sway bar product, or inconvenience or interruption in any operation.
This warranty does not extend to cosmetic blemishes and/or finish deterioration. SMSP sway bars are manufactured out of various materials each requiring care and maintenance. SMSP does not guarantee that these finishes will not deteriorate with age and use and this deterioration may be accelerated with neglect and misuse.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Urethane:
The manufacturer warrants that all SMSP Poly-Urethane Products are free from defects. Most of our soft Poly-urethane products are warranted against failures and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. Most of our hard Poly-Urethane products are warranted against defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the Poly-Urethane products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any Poly-Urethane product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents or impacts. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the Poly-Urethane product, or any participating dealer, when making a claim for replacement. The original Poly-Urethane product must also be returned and exchanged for a new Poly-Urethane product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the Poly-Urethane product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the Poly-Urethane product, or inconvenience or interruption in any operation.
This warranty does not extend to finish deterioration. SMSP Poly-Urethane products must be stored in a cool, dry environment, out of direct sunlight when not installed on the vehicle. Improper storage can lead to material warping, discoloration, and other results. SMSP does not guarantee that these finishes will not deteriorate with age and this deterioration may be accelerated with neglect and misuse.
SMSP is not responsible for costs incurred due to the customer or body shops failure to test fit and/or inspect product prior to painting. SMSP is not responsible for costs incurred due to the customer or body shops failure to follow SMSP instructions on the proper cleaning and preparation of parts prior to painting.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Brake Pads:
The manufacturer warrants that all SMSP Brake Pad Products are free from defects. Most of our Brake Pad products are warranted against failures and defects in material and workmanship for one year on the components of the kit. The warranty is void if the Brake Pad products are not installed properly on the vehicle for which it is designed. This warranty does not apply to any Brake Pad product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, maintained, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the Brake Pad product, or any participating dealer, when making a claim for replacement. The original product must also be returned and exchanged for a new product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the Brake pad product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
Brake Rotors:
The manufacturer warrants that all SMSP Brake Rotor Products are free from defects. Most of our Brake Rotor products are warranted against failures and defects in material and workmanship for one year on the components of the kit. The warranty is void if the Brake Rotor products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any Brake Rotor product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, maintained, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
Proof of purchase, MUST be presented to the service outlet from which you originally purchased the Brake Rotor product, or any participating dealer, when making a claim for replacement. The original product must also be returned and exchanged for a new product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the Brake Rotor product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SMSP does not warranty other companies and/or manufacturers product and/or work. If the installer of the product fails to follow SMSP instructions or causes damage to the vehicle during the installation of this product this must be resolved between the customer and the shop performing the work.
SMSP Brake Rotors are finished with a corrosion resistant plating material. This material is removed by the friction between the rotor and pad. During the time the plating is being removed the customer may feel and/or hear “unusual†noises. In most cases this is the plating material being removed and is to be considered normal. We can not give a timeline as to how long this will take to remove as there are many variables including but not limited to; driving style, driving type (highway vs. city), regularity of vehicle use, etc. If the unusual characteristics persist past the point the plating has been removed please consult SMSP for further guidance.
Warranty Addendums:
Damages caused by improper use, installation, modifications and/or collisions will be considered user-error and will NOT be covered under warranty.
User assumes all risks and costs associated with the use of SMSP products.
Products purchased from un-authorized dealers will not be covered under warranty.
Warranties only cover the initial purchaser and will not transfer to second hand users.
Failure to provide the required invoice, images and/or warranty claim form will result in the denial of the warranty claim. NO EXCEPTIONS.
SMSP is not responsible for fees associated with the installation/removal/servicing of components.
KEEP YOUR FACTORY PARTS. SMSP will not provide temporary
WARNING: Cancer and Reproductive Harm
