The AEM Water/Methanol 5 Gallon Tank can be used with nearly any water methanol kit for extended range.
WHY YOU WANT ONE
The AEM Water/Methanol Injection 5 gallon tank has a built-in low level switch and an anti-slosh feature.
Built in low level switch
Anti-Slosh feature incorporated into tank design
Comes with everything to mount in truck bed or car trunk
Dimensions: 21" Long x 8" Wide x 9" Tall (10" at cap)
Legal in California only for racing vehicles which may never be used upon a highway.
FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND GAUGES SHOULD BE RUN WITH AN AEM INLINE FILTER (AEM PART #30-3003)
Important Safety Notice Regarding Methanol
AEM strongly recommends that users never exceed a 50% methanol concentration when using any AEM Water Methanol system or component.
All AEM Water/Meth injection systems and components (pump, lines, fittings, filter, flow sensor, tank, and nozzles) are 100% chemically compatible with methanol. However, for safety reasons we strongly recommend that users never use more than a 50% methanol concentration in our systems.
Methanol is a toxic and highly flammable chemical. 100% Methanol ignites easily and burns vigorously with an almost undetectable flame. Methanol can be absorbed through the skin and even x-small amounts can cause blindness or even death. Using this fluid at high pressures, without dilution, in an under-hood environment with nylon lines and push-to-connect fittings is very unsafe. The performance advantages of using greater than 50% methanol concentrations are x-small, if they exist at all. However, the safety issues are very real and far out weigh any perceived benefit of running high concentrations of methanol.
Improper installation and/or adjustment of this product can result in major engine/vehicle damage. For technical assistance please contact us at 1.480.966.3040
AEM holds no responsibility for any engine damage or personal injury that results from the misuse of this product, including but not limited to injury or death caused by the mishandling of methanol.Fitment:
AEM is an aftermarket company and was founded by John Concialdi and Bob Sullivan back in 1987. The company specializes in providing performance upgrade parts for various automobiles.
It initially catered to vintage vehicles and modified imports used for street racing. By the early 1990s, it has already established itself as a top modifier and has been chosen by racers day in and day out.
Today, AEM has remained at the forefront in the industry and has since provided the best air intake products in the market.
The company rose to success because the cars fitted with their products won actual races. AEM has been a brand synonymous with fast cars and has been used by import racing legends such as Abel Ibarra, Adam Saruwatari, Tony Fuchs, and more.
The Tradition of Continuous Innovation
AEM has always been a pioneer in setting trends when it comes to aftermarket performance parts. They were the first to offer a packaged air induction system. This paved the way for the 'do-it-yourself' upgrade for most import vehicles.
They also pioneered the design of intake tubes with specific tube lengths and diameter, and coined the phrase Cold Air Intake when they saw the advantage of having cooler air for the engine.
Some other innovations they did were the conical air filters with built-in air horns, dual-chambered intake kits, a unique bypass valve that prevents hydro locking, hybrid induction systems, and electronically tuned air intakes.
This shows how AEM has always pushed the boundaries of air intake design in search of more horsepower.
Tried and Tested
All of AEM's products are tested by various independent and 3rd party companies and prove that their products produce the power they claimed, which helps them cement their status as industry leaders.
Purchase AEM at Vivid Racing
If you are in search of a quality aftermarket intake system for your vehicle, AEM has got you covered. With a track record of providing only the best, they are a company you can surely trust. Visit Vivid Racing and check out the list of products that would fit your specific need.
AEM Performance Electronics warrants to the consumer that all AEM Electronics products will be free from defects in material and workmanship for a period of twelve months from the date of the original purchase. Products that fail within this 12-month warranty period will be repaired or replaced when determined by us that the product failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of the AEM Electronics part. This warranty applies only to the original purchaser of the product and is non-transferable. All implied warranties shall be limited in duration to the said 12-month warranty period. Improper use or installation, accident, abuse, unauthorized repairs or alterations performed by the user on any AEM Electronics products voids this warranty.
In no event shall this warranty exceed the original purchase price of the AEM Electronics part nor shall AEM Electronics be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. AEM Electronics disclaims any liability for consequential damages due to breach of any written or implied warranty on all of its products.
Warranty returns will only be accepted by AEM Electronics when accompanied by a valid Return Merchandise Authorization (RMA) number and a dated proof of purchase. The product must be received by AEM Electronics within 30 days of the date the RMA is issued. Warranty claims to AEM Electronics must be shipped to us prepaid (we recommend a shipping service with package tracking capability). Once your package is received by our warranty and repairs department you will be notified and provided with updates.