JM Fabrications Aluminum Sheetmetal Drag Version Intake Manifold Unpolished Mitsubishi Lancer Evolution VII VIII IX 03+
JM Fabrications is a leader in design and manufacturing of performance parts for the motorsports industry. This leadership makes them the top choice for many DSM and EVO enthusiast when they are in need of a quality designed and engineered part.
JM Fabrications is introducing their new Aluminum Drag Version Intake Manifold. This is a must for those running a 35R or larger turbo on their cars and want a top end power. The great thing about owning a JMF part is the quality and attention to detial JMF focus on. The intake manifold is hand made, TIG welded from 6061 T6 aluminum. All the flanges are CNC machined and surfaced for precise fitment and a leak free seal. Each plenum is press bent to reduce the number of welds, which will maximize the strength of the inake manifold under high boost applications. The plenum measures in approximately at a whopping 5 liters. Velocity stacks are CNC machined into each plenum bottom to improve airflow by 10-15%. The vacuumm ports are placed on the underside of the plenum for a clean professional look. Also included 4 new 8mmx1.25mm 70mm bolts for the stock throttle body.
Installing of this part the expectancy of a gain from 10-45 HP. The JM Fabrications Aluminum Race Version Intake Manifold is designed for DSMs with eliminated EGR. Some modifications to the coil pack mounts, and upper intercooler pipes may be needed as this manifold sits down a lot lower then stock.
WARNING: Cancer and Reproductive Harm
JM Fabrications LLC will not be responsible for labor charges, loss, or consequential damage of any kind or character caused by defective parts or for charges incurred in the replacement or repair of defective parts by Purchaser. This warranty does not apply when damage is caused by surface coatings, heat wraps, abrasive materials, chemical deposits, or corrosion, unless so specified on a quotation from JM Fabrications LLC. Careless handling, including that by freight companies, and improper installation or use may void all warranties.
Any product covered by warranty that has failed will be repaired first. If a repair is not successful or feasible the product will be replaced with a new or similar condition item.
JM Fabrications LLC. must be notified of a failure within the warranty period and will then supply instructions to Customer or Dealer.
The forgoing states the Company's entire liability for any claim to damages whatever, and is made by Company and accepted by Purchaser in lieu of all other warranties, obligations, or liabilities expressed or implied.
HKS GT Extension Kit SUS304 Extension Housing & Downpipe Mitsubishi EVO VII | VIII | IX 01-07
XForce Mitsubishi Evolution 7,8,9 3" Stainless Steel High Flow Cat-Back System Mitsubishi
APR EVIL-R Wide Body Kit Mitsubishi EVO VIII IX 2003-2008