GKTECH S chassis Super Lock Angle Kit Combo

The new GKTECH Super Lock combo is designed for those that are looking for a combo as opposed to piecing a kit together one by one and for buying as a combo we are offering a 15% discount. Mix and match from a range of different options to suit your specific setup. Ie. You may or may not need every option available and as such we're not making it a requirement to purchase every required option in order to get the 15% discount (note that the LCA's and knuckles are required to be purchased in order for this to be a considered a "combo" however every other option is just that, an option).

Super Lock Chromoly LCA's. The Super Lock LCA's are available in 2 different lengths and are chassis specific. In most cases the shorter LCA's will be sufficient and the longer LCA's will in most cases only be able to be used when running wider front guards. The further the LCA is wound out the less likely there will be any issues with wheel clearance to the chassis rail. Order the type of LCA based on the chassis. Ie. if you have an S13, order S13 LCA's.

LCA length options:

• S13/R32 adjustable from +0.35'' (9mm) through to +1.73'' (44mm)
• S13/R32 adjustable from +1.53'' (39mm) through to +2.91''(74mm)
• S14/S15/R33/R34 adjustable from OEM length through to +1.37'' (35mm)
• S14/S15/R33/R34 adjustable from +1.18'' (30mm) through to +2.55'' (65mm)

• Available to suit either S13 or S14/S15 knuckles and available in OEM length or +0.78'' (20mm) extended. The +0.78'' (20mm) extended are really only useful on REALLY low cars and may also have clearance issues with some rims when used in conjunction with our drop knuckles. In 99% of cases when using drop knuckles the non extended shanks are perfectly suited. Order the type of ball joint shank based on the knuckle that you are running. If if you're running S14/S15 knuckles on an S13 you need an S14/S15 ball joint shank.

• Available to suit either S13 or S14/S15 hubs. Order based on the hubs that you are going to be running and ensure that you order the ball joint shanks to match.