This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles.
Purchasing this product requires you to sign our Vehicle Compliance Waiver here.
Direct-Fit Catalytic Converter
- Hangers Included: Yes
- Gasket Included: Yes
- Finish: Stainless Steel
- Converter Quantity: 2
- Clamp Included: Yes
- Body Width: 5
- Body Type: Spun
- Body Shape: Round
- Body Length Position Rear: 9
- Body Length Position Front: 11
- Sensor Port Count: 2
- Air Tube Adaptable: No
- Outlet Attachment: Bolt-On
- Outlet Type: Bolt-On
- Overall Length: 48.75
- Outlet Quantity: 1
- Mounting Hardware Included: Yes
- Inlet Quantity: 1
- Heat Shield Attached: No
- Type: Direct-Fit
- Title: California Direct-Fit
- Subtitle: California / CARB Compliant
- Substrate: Ceramic
- Series: California
- Oxygen Sensor Location: Pre and Post Converter
- Outlet Inside Diameter: 2.5
- Outlet Diameter: 2.5
- Material: Stainless Steel
- Universal Or Specific Fit: Specific
- Body Height: 5
- Main Piping Diameter: 2.5
- Inlet Inside Diameter: 2.5
- Inlet Diameter: 2.5
- Inlet Attachment: Bolt-On
- Inlet Type: Bolt-On
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582629. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed specifically for the 2007-2010 Toyota Tundra. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Certification Level : LEV2 ULEV
with Curved Muffler Inlet
Fits position: LeftThis product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles. Purchasing this product requires you to sign our Vehicle Compliance Waiver here.
||8 Cylinder 5.7 Liter
- Certification Level : LEV2 ULEV
- with Curved Muffler Inlet
Who is MagnaFlow?
MagnaFlow is an aftermarket exhaust manufacturer established in 1981. They have been doing what Vivid Racing considers to be one of the best performance exhaust systems available in the market today. The company has been in business for over 35 years and has supplied numerous kits to different enthusiasts all around the world.
Three is Key
MagnaFlow has been known for three things, Quality, Power, and Sound. All their products are made having these three things in mind. It has to satisfy all of these before they even let their customers have it. This is why MagnaFlow products have been widely accepted by a variety of car enthusiasts. Their eagerness to provide quality products that create power and a distinct sound has made the company a success.
As a market leader, MagnaFlow uses premium components and the latest technology to achieve the highest levels of performance and endurance. The company offers a wide range of aftermarket products. From direct-fit catalytic converters and full performance stainless steel exhaust systems to universal mufflers and kits which can be used to fabricate an exhaust for nearly any application. As an ISO-9001 certified company, they stand behind its quality, durability, and performance with a lifetime warranty.
For nearly 40 years, MagnaFlow exhausts have had a reputation for power among automotive enthusiasts. With a dedicated research & development department, the latest technology is always right around the corner. Every new part passes a strict performance and quality check using in-ground dynamometers, multiple flow benches, and advanced sound testing equipment. If a product doesn't meet a specific power output range, then it doesn't make the cut.
MagnaFlow is committed to providing exhaust systems and parts that bring out your ride's true voice. Their secret? An ultra-efficient straight-through design with a perforated stainless steel core, mesh wrap, and acoustical fiber fill. From the way the company designs to how they pack the fill, these classic aftermarket add ons produce that deep, smooth tone you love every time.
Advanced Manufacturing Technology
The company utilizes the industry's most advanced manufacturing pieces of machinery and designing software technology to create a superior product compared to others. The company offers a wide range of products from bolt-on kits that would fit a specific vehicle like an OEM part, a universal muffler that can be used to any application, or a custom made kit for those who are a bit more serious when it comes to performance.
We have the MagnaFlow performance exhaust systems and parts for nearly any type of vehicle and configuration.
MagnaFlow Exhaust Systems
- American Muscle Exhaust Systems
- Truck Exhaust Systems
- SUV Exhaust Systems
- UTV Exhaust Systems
- Cat-Back Exhaust Systems
- Axle-Back Exhaust Systems
- Crossmember-Back Exhaust Systems
- Turbo-Back Exhaust Systems
- Popular Performance Mufflers
- Straight-Through Mufflers
- Glasspack Mufflers
- Universal Mufflers
- Mufflers With Tips
MagnaFlow is EPA Compliant and Practices Sustainability
As a national leader in aftermarket catalytic converters, MagnaFlow depends on three precious metals to build their products: Platinum, Palladium, and Rhodium. The company helps maintain precious resources by extracting them from old converters to go back into the supply chain. MagnaFlow has started a program to pass on a portion of the value of the precious metals to customers in the form of a MagnaFlow Visa® Prepaid Card. After you install your new replacement part, you can ship them your old OEM part at no cost.
Find MagnaFlow at Vivid Racing
If you are in search of an exhaust system that does not only make your car sound good but makes it go faster as well, then MagnaFlow is the brand for you. With a complete line of products to choose from, they would definitely have the right exhaust for your specific needs.
Vivid Racing is proud to offer premium aftermarket parts and builds from some of the biggest names in the business. From the power and performance of MagnaFlow exhausts to the style and advanced technology of our aftermarket headlight collection, we've got your ride covered from bumper to bumper. If you can't find a specific part you need or you have questions, please contact our expert sales team at (480) 966-3040.
PERFORMANCE EXHAUST PRODUCTS WARRANTY
The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CATALYTIC CONVERTERS WARRANTIES
- Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
- Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
- Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
- Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
- Aluminized Systems: 1 Year Limited Warranty
- Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
Original Warranty Certificate and Installation Statement:
To be completely filled out by installer and returned to manufacturer. Include dealer name, complete address and phone number. Include customer name, complete address and phone number. Vehicle make, year, model, engine size, mileage and date must be filled out. The part number installed must be filled out. The Installation Statement must be completed by installer, stating the reason for replacement. Vehicle owner and installer must sign and date the Warranty Certificate /Installation Statement.
Catalytic Converter Warranty Statement Installer's Copy:
To be retained by Installer with copy of the invoice for six (6) months.
To be retained by the vehicle owner.
Catalytic Converters are emission control devices which are designed to last the life of the vehicle and do not normally require replacement. Furthermore, if the vehicle is properly used and maintained, original converters are covered by the emission control warranty for 8 years or 80,000 miles. Federal law prohibits repair businesses from replacing these devices except under certain limited circumstances. In order to verify that proper circumstances exist, the owner of the vehicle on which such repairs are made and a facility representative must sign the required statements on the warranty card. To avoid failing a warranty audit, please follow the instructions to ensure the new cards are filled out correctly and distributed accordingly.MOTORCYCLE PRODUCTS WARRANTY
MagnaFlow motorcycle exhaust products, including Arlen Ness by MagnaFlow exhaust systems, are warranted against defects in material and/or assembly workmanship only for a period of 1 year from invoice date. This Warranty is void if the Product is not installed properly on the vehicle for which it is designed. This Warranty does not apply to any Product which has been installed on any commercial or racing vehicle or which has been improperly installed, modified, altered or subjected to misuse or damage from accidents; including excessive heat. Also, cost of labor and any additional parts or components required to complete installation of a replacement Product are not covered by this Warranty; including coatings, paints and/or finishes, flaws or rust. MagnaFlow including Arlen Ness by MagnaFlow exhaust systems are designed to fit and operate on original OEM motors and chassis with no modifications of any type on the motorcycle.
Proof of purchase from an authorized retailer must accompany any warranty claim. The original Product that is deemed to be under warranty may only be returned and/or exchanged for a Product of the same part number. No other warranty, expressed or implied (including merchantability), applies to the Products, nor is any person including the manufacturer authorized to assume any other warranty. Dealers and distributors are not authorized to make warranty judgments or claims regarding MagnaFlow products. The manufacturer does not assume any responsibility for any consequential damages occasioned by the Product, or inconvenience or interruption in any operation, service or shipping. All approved warranty returns must be accompanied by a return authorization number. Parts returned to MagnaFlow without a return authorization and accompanying documentation may be refused. No parts will be accepted with freight due.
This warranty gives you specific legal rights. You may also have other rights which may vary from State to State. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
The warranties set forth herein are exclusive and, unless otherwise required by applicable law, no other warranties are made by MagnaFlow or are authorized to be made with respect to the Product.
Vendor Media File
Click to Download here
Vendor Media File
Click to Download here
Vendor Media File
Click to Download here