Wheel Blowout Sale
  See more parts for your Alfa Romeo Spider

MagnaFlow Exhaust Products Universal Catalytic Converter - 2.00in.

$105.27 SALE: $100.00

MagnaFlow

Model #91004


Shopper Award

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles.

Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.

Specifications:

  • All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.
  • Stainless steel construction
  • Federal Emissions compliant design
  • Formulated for Gas and Diesel Applications

Universal Catalytic Converter - 2.00in.

Features

  • Air Tube Adaptable: No
  • Body Type: Clam Shell
  • Finish: Stainless Steel
  • Heat Shield Material: Aluminized Steel
  • Inlet Attachment: Weld-On
  • Inlet Diameter: 2
  • Inlet Orientation: Straight
  • Material: Stainless Steel
  • Outlet Attachment: Weld-On
  • Outlet Diameter: 2
  • Outlet Orientation: Straight
  • Oxygen Sensor Location: None
  • Series: Standard Grade
  • Subtitle: Federal / EPA Compliant
  • Title: Standard Grade Universal
  • Type: Universal
  • MagnaFlow specializes in superior catalytic converter and exhaust technology and each converter is designed to the exact original equipment specifications while keeping the Check Engine Light off.

Notes:

Fits position: Rear Right

Fits position: Right

Fits position: Rear

Fits position: Front

Fits position: Left

Fits position: Front Left

Fits position: Rear Left

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles. Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1982-1989
Alfa Romeo Spider

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1979
American Motors Concord

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1978-1979
American Motors Concord

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1978-1979
American Motors Concord

6 Cylinder 4.2 Liter
  • Cutting and Welding Required During Installation
1978-1979
American Motors Concord

8 Cylinder 5.0 Liter
  • with Single Exhaust
  • Cutting and Welding Required During Installation
1980
American Motors Eagle
Limited
6 Cylinder 4.2 Liter
  • Cutting and Welding Required During Installation
1977
American Motors Pacer

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1977
American Motors Pacer

6 Cylinder 4.2 Liter
  • Cutting and Welding Required During Installation
1993-1995
Buick Century

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1994-1995
Buick Century

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1982-1992
Buick Century

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1986-1989
Buick Century

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1985
Buick Electra

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1985
Buick Electra

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1995
Buick Regal

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1988-1989
Buick Regal

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1987-1989
Buick Skyhawk

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1984-1986
Buick Skyhawk

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1984
Buick Skyhawk

4 Cylinder 1.8 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1994-1995
Buick Skylark

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1993-1995
Buick Skylark

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1982-1991
Buick Skylark

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1986-1988
Buick Skylark

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1986-1987
Buick Somerset

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1986-1987
Buick Somerset

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1985
Buick Somerset Regal

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1985
Buick Somerset Regal

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1987-1988
Cadillac Cimarron

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1990-1995
Chevrolet Beretta

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1995
Chevrolet Beretta

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1990-1994
Chevrolet Beretta

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chevrolet Beretta

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chevrolet Beretta

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1983-1986
Chevrolet Camaro

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1982
Chevrolet Camaro

4 Cylinder 2.5 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1990-1995
Chevrolet Cavalier

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1995
Chevrolet Cavalier

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1991-1994
Chevrolet Cavalier

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chevrolet Cavalier

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1985-1986
Chevrolet Cavalier

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1982-1990
Chevrolet Celebrity

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990
Chevrolet Celebrity

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1986-1989
Chevrolet Celebrity

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1990-1995
Chevrolet Corsica

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1995
Chevrolet Corsica

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chevrolet Corsica

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chevrolet Corsica

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1990-1995
Chevrolet Lumina

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1993
Chevrolet Lumina

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1992
Chevrolet Lumina

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1995
Chevrolet Monte Carlo

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1994-1995
Chevrolet S10

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1985-1991
Chevrolet Sprint

3 Cylinder 1.0 Liter
  • Cutting and Welding Required During Installation
1991
Chevrolet Sprint

3 Cylinder 1.0 Liter
  • with Sway Bar
  • Cutting and Welding Required During Installation
1975
Chevrolet Vega

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1987-1989
Chrysler Conquest

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1981, 1983
Chrysler Cordoba

6 Cylinder 3.7 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1988-1991
Chrysler Dynasty

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1984
Chrysler E Class

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1983
Chrysler Fifth Avenue

6 Cylinder 3.7 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1984-1986
Chrysler LeBaron

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1981
Chrysler LeBaron

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1985-1986
Chrysler New Yorker

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1984
Chrysler New Yorker

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1982
Chrysler New Yorker

6 Cylinder 3.7 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1990-1991
Chrysler TC Maserati

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1990
Chrysler TC Maserati

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1992
Daihatsu Rocky

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1989
Dodge 2000 GTX

4 Cylinder 2.0 Liter
  • SOHC
  • Cutting and Welding Required During Installation
1984-1985
Dodge 600

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1985
Dodge Aries

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1988-1995
Dodge Caravan

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1983
Dodge Charger

4 Cylinder 1.6 Liter
  • Air Tube
  • Cutting and Welding Required During Installation
1983
Dodge Charger

4 Cylinder 1.7 Liter
  • Cutting and Welding Required During Installation
1989-1991
Dodge Colt

4 Cylinder 2.0 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1988-1991
Dodge Colt

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1989-1990
Dodge Colt

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1987
Dodge Colt

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
  • Split Date From: From 12/1986
1984-1986
Dodge Conquest

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1977
Dodge D150

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1989-1995
Dodge Dakota

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1979, 1981
Dodge Diplomat

6 Cylinder 3.7 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1988-1993
Dodge Dynasty

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1988-1989
Dodge Grand Caravan

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1985-1986
Dodge Lancer

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1987-1988
Dodge Mini Ram

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1981
Dodge Mirada

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1990-1991
Dodge Ram 50

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1990
Dodge Shadow

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1991-1992
Eagle 2000 GTX

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1993-1994
Eagle Talon

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1990-1994
Eagle Talon

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1990-1991
Eagle Vista

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1990-1991
Eagle Vista

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1986-1995
Ford Aerostar

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1986-1995
Ford Aerostar

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1986-1987
Ford Aerostar

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1986-1987
Ford Aerostar

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1994-1995
Ford Aspire

4 Cylinder 1.3 Liter
  • Cutting and Welding Required During Installation
1995
Ford Contour

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1980
Ford Courier

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1991-1995
Ford Escort

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1994-1995
Ford Mustang

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1994-1995
Ford Mustang

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1989-1992
Ford Probe

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1992
Ford Probe

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1987-1988
Ford Ranger

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1986-1987
Ford Ranger

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
  • Split Date From: From 01/1986 To: To 11/1986
1987
Ford Ranger

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
  • Split Date From: From 11/1986
1992-1994
Ford Tempo

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1994
Geo Metro

3 Cylinder 1.0 Liter
  • with Sway Bar
  • Cutting and Welding Required During Installation
1990-1991
Geo Storm

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1994-1995
GMC Sonoma

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1995
Honda Odyssey

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1993-1995
Hyundai Elantra

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1992-1995
Hyundai Elantra

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1993-1995
Hyundai Scoupe

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1990-1995
Hyundai Sonata

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1992-1995
Hyundai Sonata

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1989-1991
Hyundai Sonata

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1991-1994
Infiniti G20

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1990-1992
Infiniti M30

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1990-1992
Infiniti M30

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989
Isuzu I-Mark

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1991-1993
Isuzu Stylus

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1992
Isuzu Stylus

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1990-1994
Jaguar Vanden Plas

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Jaguar Vanden Plas

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1975
Jaguar XJ12

12 Cylinder 5.3 Liter
  • Cutting and Welding Required During Installation
1990-1994
Jaguar XJ6

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Jaguar XJ6

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1993-1996
Jaguar XJS

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1993-1996
Jaguar XJS

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1992
Jaguar XJS

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1982-1987
Jaguar XJS

12 Cylinder 5.3 Liter
  • Cutting and Welding Required During Installation
1982-1987
Jaguar XJS

12 Cylinder 5.3 Liter
  • Cutting and Welding Required During Installation
1995
Kia Sephia

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1994-1995
Kia Sephia

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1987-1988
Land Rover Range Rover

8 Cylinder 3.5 Liter
  • Cutting and Welding Required During Installation
1987-1988
Land Rover Range Rover

8 Cylinder 3.5 Liter
  • Cutting and Welding Required During Installation
1990-1991
Lexus ES250

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1992-1995
Lexus SC400

8 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1992-1995
Lexus SC400

8 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1990-1992
Lotus Elan

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1980-1995
Lotus Esprit

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1986-1994
Mazda 323

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mazda 626

4 Cylinder 2.0 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1988-1992
Mazda 626

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1988-1991
Mazda 929

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mazda B2300

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1989-1990
Mazda B2600

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mazda B3000

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994-1995
Mazda B3000

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994
Mazda B4000

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1994
Mazda B4000

6 Cylinder 4.0 Liter
  • Cutting and Welding Required During Installation
1994
Mazda MPV

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994
Mazda MPV

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1995
Mazda MX-6

4 Cylinder 2.0 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1988-1992
Mazda MX-6

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1995
Mazda Protege

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1991-1994
Mercury Capri

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1983-1985, 1989
Mercury Grand Marquis

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1983-1985, 1989
Mercury Grand Marquis

8 Cylinder 5.0 Liter
  • Cutting and Welding Required During Installation
1995
Mercury Mystique

6 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1992-1994
Mercury Topaz

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1991-1995
Mercury Tracer

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1987-1990
Mercury Tracer

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1993-1995
Mitsubishi 3000GT

6 Cylinder 3.0 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1991-1992
Mitsubishi 3000GT

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1992
Mitsubishi Diamante

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Mitsubishi Eclipse

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1990-1994
Mitsubishi Eclipse

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1989-1993
Mitsubishi Galant

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1985-1986
Mitsubishi Galant

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1990-1994
Mitsubishi Mighty Max

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1991
Mitsubishi Mirage

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1995
Mitsubishi Montero

6 Cylinder 3.0 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1995
Mitsubishi Montero

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1989-1994
Mitsubishi Montero

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1983-1989
Mitsubishi Starion

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1979
Nissan 210

4 Cylinder 1.4 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1979
Nissan 210

4 Cylinder 1.5 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1995-1997
Nissan Altima

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1993-1994
Nissan Altima

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1988-1991
Nissan Micra

4 Cylinder 1.2 Liter
  • Cutting and Welding Required During Installation
1986-1987
Nissan Sentra

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1987
Nissan Sentra

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1982-1983
Nissan Sentra

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1985
Oldsmobile 98

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1985
Oldsmobile 98

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994-1995
Oldsmobile Achieva

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1993-1995
Oldsmobile Achieva

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1985-1987
Oldsmobile Calais

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1985-1987
Oldsmobile Calais

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1988-1991
Oldsmobile Cutlass Calais

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1989
Oldsmobile Cutlass Calais

6 Cylinder 3.3 Liter
  • Cutting and Welding Required During Installation
1988
Oldsmobile Cutlass Calais

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1993-1995
Oldsmobile Cutlass Ciera

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1994-1995
Oldsmobile Cutlass Ciera

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1983-1989, 1991-1992
Oldsmobile Cutlass Ciera

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990
Oldsmobile Cutlass Ciera

4 Cylinder 2.5 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1986-1989
Oldsmobile Cutlass Ciera

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1986-1988
Oldsmobile Cutlass Ciera

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1994
Oldsmobile Cutlass Cruiser

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1991-1992
Oldsmobile Cutlass Cruiser

4 Cylinder 2.5 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1987-1990
Oldsmobile Cutlass Cruiser

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1987-1989
Oldsmobile Cutlass Cruiser

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1987-1988
Oldsmobile Cutlass Cruiser

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1989-1990, 1993
Oldsmobile Cutlass Supreme

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1988-1989
Oldsmobile Cutlass Supreme

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1987-1988
Oldsmobile Firenza

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1985, 1987
Oldsmobile Firenza

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1986
Oldsmobile Firenza

6 Cylinder 2.8 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1982-1984
Oldsmobile Omega

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1979
Oldsmobile Starfire

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1976-1977
Oldsmobile Starfire

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1989-1992
Oldsmobile Toronado

6 Cylinder 3.8 Liter
  • Cutting and Welding Required During Installation
1985-1986
Plymouth Caravelle

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1981
Plymouth Champ

4 Cylinder 1.4 Liter
  • Cutting and Welding Required During Installation
1981
Plymouth Champ

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1988, 1990-1991
Plymouth Colt

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1989-1990
Plymouth Colt

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1987
Plymouth Colt

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
  • Split Date From: From 12/1986
1989-1990
Plymouth Colt
Vista
4 Cylinder 2.0 Liter
  • Federal Emissions Equipped
  • Cutting and Welding Required During Installation
1984-1986
Plymouth Conquest

4 Cylinder 2.6 Liter
  • Cutting and Welding Required During Installation
1975
Plymouth Duster

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1988
Plymouth Grand Voyager

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990-1994
Plymouth Laser

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1990-1994
Plymouth Laser

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1975-1976
Plymouth Scamp

6 Cylinder 3.7 Liter
  • Cutting and Welding Required During Installation
1983
Plymouth Turismo

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1983
Plymouth Turismo

4 Cylinder 1.6 Liter
  • Air Tube
  • Cutting and Welding Required During Installation
1987-1995
Plymouth Voyager

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1986
Plymouth Voyager

4 Cylinder 2.6 Liter
  • without Air Tube
  • Cutting and Welding Required During Installation
1982-1991
Pontiac 6000

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1988-1991
Pontiac 6000

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1986-1989
Pontiac 6000

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1979-1980
Pontiac Acadian

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1976-1977
Pontiac Astre

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1975
Pontiac Astre

4 Cylinder 2.3 Liter
  • without A.I.R
  • Cutting and Welding Required During Installation
1982-1986
Pontiac Firebird

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1985-1987, 1990-1991
Pontiac Firefly

3 Cylinder 1.0 Liter
  • Cutting and Welding Required During Installation
1994-1995
Pontiac Grand Am

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1993-1995
Pontiac Grand Am

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1985-1991
Pontiac Grand Am

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1987-1989
Pontiac Grand Am

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1985-1987
Pontiac Grand Am

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1991-1993
Pontiac Grand Prix

6 Cylinder 3.1 Liter
  • Excluding Dual Exhaust
  • Cutting and Welding Required During Installation
1989-1990
Pontiac Grand Prix

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1988-1989
Pontiac Grand Prix

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1984-1985
Pontiac J2000 Sunbird

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1988-1993
Pontiac LeMans

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1989-1990
Pontiac LeMans

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1988-1991
Pontiac Optima

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1990
Pontiac Optima

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1991-1994
Pontiac Sunbird

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1987-1994
Pontiac Sunbird

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1986
Pontiac Sunbird

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1978
Pontiac Sunbird

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1977
Pontiac Sunbird

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1976
Pontiac Sunbird

4 Cylinder 2.3 Liter
  • without A.I.R
  • Cutting and Welding Required During Installation
1995
Pontiac Sunfire

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1995
Pontiac Sunfire

4 Cylinder 2.3 Liter
  • Cutting and Welding Required During Installation
1990-1991
Pontiac Tempest

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1991
Pontiac Tempest

6 Cylinder 3.1 Liter
  • Cutting and Welding Required During Installation
1987-1989
Pontiac Tempest

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1987-1989
Pontiac Tempest

6 Cylinder 2.8 Liter
  • Cutting and Welding Required During Installation
1975
Porsche 914

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1987-1988
Porsche 924

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1980-1982
Porsche 924

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1989
Porsche 944

4 Cylinder 2.7 Liter
  • Cutting and Welding Required During Installation
1986-1988
Porsche 944

4 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1983-1987
Renault Alliance

4 Cylinder 1.4 Liter
  • Cutting and Welding Required During Installation
1985-1987
Renault Alliance

4 Cylinder 1.7 Liter
  • Cutting and Welding Required During Installation
1987
Renault Alliance

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1984-1986
Renault Encore

4 Cylinder 1.4 Liter
  • Cutting and Welding Required During Installation
1985-1986
Renault Encore

4 Cylinder 1.7 Liter
  • Cutting and Welding Required During Installation
1984-1985
Renault Fuego

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1994
Saab 900

4 Cylinder 2.1 Liter
  • Cutting and Welding Required During Installation
1993-1995
Saturn SC2

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1993-1995
Saturn SL2

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1993-1995
Saturn SW2

4 Cylinder 1.9 Liter
  • Cutting and Welding Required During Installation
1988-1989
Subaru DL

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1985-1987
Subaru DL

4 Cylinder 1.8 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1984
Subaru DL

4 Cylinder 1.8 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1983-1986, 1988-1989
Subaru GL

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1987
Subaru GL

4 Cylinder 1.8 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1985-1989
Subaru GL-10

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1993-1997
Subaru Impreza

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1987-1994
Subaru Justy

3 Cylinder 1.2 Liter
  • Cutting and Welding Required During Installation
1991-1994
Subaru Legacy

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1994
Subaru Loyale

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1989-1991
Subaru XT

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1988-1991
Subaru XT

6 Cylinder 2.7 Liter
  • Cutting and Welding Required During Installation
1986-1987
Subaru XT

4 Cylinder 1.8 Liter
  • Cutting and Welding Required During Installation
1985
Subaru XT

4 Cylinder 1.8 Liter
  • without Heat Riser
  • Cutting and Welding Required During Installation
1995
Suzuki Esteem

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1986-1995
Suzuki Samurai

4 Cylinder 1.3 Liter
  • Cutting and Welding Required During Installation
1991-1992
Suzuki Sidekick

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1989-1994
Suzuki Swift

4 Cylinder 1.3 Liter
  • Cutting and Welding Required During Installation
1992-1994
Suzuki Swift

3 Cylinder 1.0 Liter
  • Cutting and Welding Required During Installation
1992-1993
Suzuki Swift

4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1988-1995
Toyota 4Runner

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1988-1991
Toyota Camry

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1994
Toyota Celica

4 Cylinder 2.2 Liter
  • Cutting and Welding Required During Installation
1990-1993
Toyota Celica
GT
4 Cylinder 2.2 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1990-1993
Toyota Celica
GTS
4 Cylinder 2.2 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1990
Toyota Corolla
DLX All Trac
4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1990
Toyota Corolla
SR5 All Trac
4 Cylinder 1.6 Liter
  • Cutting and Welding Required During Installation
1991-1995
Toyota MR2

4 Cylinder 2.0 Liter
  • Cutting and Welding Required During Installation
1991-1995
Toyota MR2

4 Cylinder 2.2 Liter
  • California Emissions Equipped Vehicles Registered Outside Of California
  • Cutting and Welding Required During Installation
1988-1995
Toyota Pickup

6 Cylinder 3.0 Liter
  • Cutting and Welding Required During Installation
1994-1995
Toyota Previa

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1994-1995
Toyota Previa

4 Cylinder 2.4 Liter
  • Cutting and Welding Required During Installation
1995
Toyota Tercel

4 Cylinder 1.5 Liter
  • Cutting and Welding Required During Installation
1993, 1995
Volkswagen EuroVan

5 Cylinder 2.5 Liter
  • Cutting and Welding Required During Installation
1990-1991
Yugo Cabrio

4 Cylinder 1.3 Liter
  • Cutting and Welding Required During Installation
1990-1991
Yugo GV

4 Cylinder 1.3 Liter
  • Cutting and Welding Required During Installation

Who is MagnaFlow?

MagnaFlow is an aftermarket exhaust manufacturer established in 1981. They have been doing what Vivid Racing considers to be one of the best performance exhaust systems available in the market today. The company has been in business for over 35 years and has supplied numerous kits to different enthusiasts all around the world.

Three is Key

MagnaFlow has been known for three things, Quality, Power, and Sound. All their products are made having these three things in mind. It has to satisfy all of these before they even let their customers have it. This is why MagnaFlow products have been widely accepted by a variety of car enthusiasts. Their eagerness to provide quality products that create power and a distinct sound has made the company a success.

QUALITY

As a market leader, MagnaFlow uses premium components and the latest technology to achieve the highest levels of performance and endurance. The company offers a wide range of aftermarket products. From direct-fit catalytic converters and full performance stainless steel exhaust systems to universal mufflers and kits which can be used to fabricate an exhaust for nearly any application. As an ISO-9001 certified company, they stand behind its quality, durability, and performance with a lifetime warranty.

POWER

For nearly 40 years, MagnaFlow exhausts have had a reputation for power among automotive enthusiasts. With a dedicated research & development department, the latest technology is always right around the corner. Every new part passes a strict performance and quality check using in-ground dynamometers, multiple flow benches, and advanced sound testing equipment. If a product doesn't meet a specific power output range, then it doesn't make the cut.

SOUND

MagnaFlow is committed to providing exhaust systems and parts that bring out your ride's true voice. Their secret? An ultra-efficient straight-through design with a perforated stainless steel core, mesh wrap, and acoustical fiber fill. From the way the company designs to how they pack the fill, these classic aftermarket add ons produce that deep, smooth tone you love every time.

Advanced Manufacturing Technology

The company utilizes the industry's most advanced manufacturing pieces of machinery and designing software technology to create a superior product compared to others. The company offers a wide range of products from bolt-on kits that would fit a specific vehicle like an OEM part, a universal muffler that can be used to any application, or a custom made kit for those who are a bit more serious when it comes to performance.

We have the MagnaFlow performance exhaust systems and parts for nearly any type of vehicle and configuration.

MagnaFlow Exhaust Systems

  • American Muscle Exhaust Systems
  • Truck Exhaust Systems
  • SUV Exhaust Systems
  • UTV Exhaust Systems

MagnaFlow Configurations

  • Cat-Back Exhaust Systems
  • Axle-Back Exhaust Systems
  • Crossmember-Back Exhaust Systems
  • Turbo-Back Exhaust Systems

MagnaFlow Mufflers

  • Popular Performance Mufflers
  • Straight-Through Mufflers
  • Glasspack Mufflers
  • Universal Mufflers
  • Mufflers With Tips

MagnaFlow is EPA Compliant and Practices Sustainability

As a national leader in aftermarket catalytic converters, MagnaFlow depends on three precious metals to build their products: Platinum, Palladium, and Rhodium. The company helps maintain precious resources by extracting them from old converters to go back into the supply chain. MagnaFlow has started a program to pass on a portion of the value of the precious metals to customers in the form of a MagnaFlow Visa® Prepaid Card. After you install your new replacement part, you can ship them your old OEM part at no cost.

Find MagnaFlow at Vivid Racing

If you are in search of an exhaust system that does not only make your car sound good but makes it go faster as well, then MagnaFlow is the brand for you. With a complete line of products to choose from, they would definitely have the right exhaust for your specific needs.

Vivid Racing is proud to offer premium aftermarket parts and builds from some of the biggest names in the business. From the power and performance of MagnaFlow exhausts to the style and advanced technology of our aftermarket headlight collection, we've got your ride covered from bumper to bumper. If you can't find a specific part you need or you have questions, please contact our expert sales team at (480) 966-3040.

PERFORMANCE EXHAUST PRODUCTS WARRANTY
The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.

This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.

The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.

No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
  • Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
  • Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
  • Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
  • Aluminized Systems: 1 Year Limited Warranty
  • Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
CATALYTIC CONVERTERS WARRANTIES
Original Warranty Certificate and Installation Statement:
To be completely filled out by installer and returned to manufacturer. Include dealer name, complete address and phone number. Include customer name, complete address and phone number. Vehicle make, year, model, engine size, mileage and date must be filled out. The part number installed must be filled out. The Installation Statement must be completed by installer, stating the reason for replacement. Vehicle owner and installer must sign and date the Warranty Certificate /Installation Statement.

Catalytic Converter Warranty Statement Installer's Copy:
To be retained by Installer with copy of the invoice for six (6) months.

Customer's Copy:
To be retained by the vehicle owner.

Catalytic Converters are emission control devices which are designed to last the life of the vehicle and do not normally require replacement. Furthermore, if the vehicle is properly used and maintained, original converters are covered by the emission control warranty for 8 years or 80,000 miles. Federal law prohibits repair businesses from replacing these devices except under certain limited circumstances. In order to verify that proper circumstances exist, the owner of the vehicle on which such repairs are made and a facility representative must sign the required statements on the warranty card. To avoid failing a warranty audit, please follow the instructions to ensure the new cards are filled out correctly and distributed accordingly.

MOTORCYCLE PRODUCTS WARRANTY
MagnaFlow motorcycle exhaust products, including Arlen Ness by MagnaFlow exhaust systems, are warranted against defects in material and/or assembly workmanship only for a period of 1 year from invoice date. This Warranty is void if the Product is not installed properly on the vehicle for which it is designed. This Warranty does not apply to any Product which has been installed on any commercial or racing vehicle or which has been improperly installed, modified, altered or subjected to misuse or damage from accidents; including excessive heat. Also, cost of labor and any additional parts or components required to complete installation of a replacement Product are not covered by this Warranty; including coatings, paints and/or finishes, flaws or rust. MagnaFlow including Arlen Ness by MagnaFlow exhaust systems are designed to fit and operate on original OEM motors and chassis with no modifications of any type on the motorcycle.

Proof of purchase from an authorized retailer must accompany any warranty claim. The original Product that is deemed to be under warranty may only be returned and/or exchanged for a Product of the same part number. No other warranty, expressed or implied (including merchantability), applies to the Products, nor is any person including the manufacturer authorized to assume any other warranty. Dealers and distributors are not authorized to make warranty judgments or claims regarding MagnaFlow products. The manufacturer does not assume any responsibility for any consequential damages occasioned by the Product, or inconvenience or interruption in any operation, service or shipping. All approved warranty returns must be accompanied by a return authorization number. Parts returned to MagnaFlow without a return authorization and accompanying documentation may be refused. No parts will be accepted with freight due.

This warranty gives you specific legal rights. You may also have other rights which may vary from State to State. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

The warranties set forth herein are exclusive and, unless otherwise required by applicable law, no other warranties are made by MagnaFlow or are authorized to be made with respect to the Product.

Vendor Media File

Click to Download here

Vendor Media File

Click to Download here

Check out these other great products