NEO Synthetic Oil 75W90 Gear Oil Synthetic Base Heavy Duty Quart

NEO synthetic Gear Oils are designed to take 40 percent more load carrying capabilities than its competitors. NEO Gear Oils are compounded with the most recently developed additive system to provide the ultimate in gear protection, from an E P wear, corrosive wear, and shock load wear standpoint.

A friction modifier is also employed to reduce sliding friction resulting in lower energy requirements, thus less drag, lower fuel consumption, and more horsepower.

NEO synthetic is designed to withstand higher temperature, and will allow gear shifting at a much lower temperature than petroleum lubricants. In addition, it has inherently higher film strength than petroleum lubricants, thereby providing added protection to the bearings and gears.

Features

• 75W140 Gear Oil Synthetic Base Heavy Duty
• Sold As Quart
• Reduces friction
• Runs cooler
• Increases fuel mileage
• Superior film strength
• Extends gear life
• Eases cold temperature shifting
• Extended service life

• The single molecular structure of the NEO synthetic provides better and more consistent lubricating properties than petroleum. This reduces friction, which reduces gear wear. Reduced friction also means fuel mileage can be expected to increase.

• Kinematic at 212 degree F 17.5cSt
• Flash Point 405 degree F
• Pour Point -50 degree F

• NEO Gear Oils meet and exceeds requirements for Auto Spec GL-2 through GL-5 and meets military specifications MIL-L-2105E.
• Caution: Use the viscosity grade recommended by the manufacturer for the expected environment.
• Specification for 75w140HD
• Viscosity Index 175

• NEO Gear Oil exceeds the requirements of auto specs GL-2 thru GL-5 and military specification MIL-L-2105E. It is ideally suited for autos and trucks requiring this viscosity grade to these specifications.
• NEO meets the requirements for GL-4 grade even where manufacturers discourage the use of a GL-5 product. It is recommended for front wheel drive transaxle use where GL-4 performance is specified.
• Common vehicle drive train components needing the NEO Gear Oils are manual transmissions, drive axles, differentials (including limited slip differentials), transaxles, auxiliary transmissions, transfer cases, overdrives and final drives.
• Industrial equipment applications for NEO Gear Oils include gear boxes for conveyors and similar assembly line drives.
• Gear boxes using this type of lubricant typically do not need any break-in period on petroleum lubricants. The NEO Gear Oil can be used as a direct replacement at anytime.
• NEO Gear Oil will mix with petroleum products; it is not necessary to flush the gear box first. However, mixing a large amount of petroleum with NEO synthetic will reduce the qualities of the NEO and will shorten the service life. This is not recommended. Using aftermarket additives is not necessary and may product unpredictable results. Use of aftermarket additives voids the NEO warranty.