OEM Springs

OEM Springs

Any spring - leaf, torsion, or coil - must correct for road surface imperfections, keep the suspension system at a set height, and sustain additional weight without excessive drooping. The damping function of a spring is determined by the diameter of the wire and the shape of the coil windings.

Each of these tasks is critical in delivering comfort, accurate handling, and load-bearing capabilities in today's vehicle ??? three essential areas where customers will have concerns.

Steel multi-leaf springs are one of the oldest and most extensively utilized spring types in suspension systems, according to history. The leaf spring has several benefits because it serves as a spring and because it connects the axle to the chassis directly. A single "mono-leaf" spring is used in various applications.

Although leaf springs are often employed in truck usage with solid drive axles, in performance road automobiles, you can pair a transverse leaf spring with an individually suspended rear axle to provide a lightweight rear suspension system.

By varying the number, thicknesses, widths, and lengths of the spring leaves, the leaf spring may be tailored to varied load-bearing and ride-control needs.

Furthermore, the friction of the leaves brushing together causes a leaf spring to operate as its rebound dampener. A traditional steel spring can sometimes be replaced with a plastic unit, which saves unsprung weight and prevents corrosion from road debris and other factors.

Torsion Springs

Torsion-bar suspensions have been utilized in cars with short-long-arm (SLA) suspension systems for many generations. The torsion bar is a circular, four-foot-long bar meant to twist as the load is placed on the suspension system. A torsion bar will only match the side of the car for which it was built since it is often preloaded by a clockwise or counterclockwise twist incorporated into it.

Compactness and low weight are two main benefits of the torsion bar suspension system. You can utilize torsion bars to fine-tune suspension height since a threaded screw adjustment regulates the tension. Torsion bars can be connected to either the upper or lower control arms, giving the design further adaptability.

Coil Spring

If we imagine a coil spring as a long, thin torsion bar twisted into a coil form, we may better understand its operation. The coil spring works on the same principle as a torsion bar since the coiled wire twists between compression and extension cycles.

Because a coil spring takes up so little room, you may utilize it in several suspension systems, including MacPherson struts, solid-axle with trailing arms, individually sprung rear axles, and any SLA suspension system that uses a spring or coil-over-shock absorber layout.

The coil spring is used in the most recent imports in the MacPherson strut arrangement versions. The coil spring's properties are determined by the wire length, gauge, overall diameter, and several coils.

A coil spring can be built as a variable rate spring in some circumstances, increasing its load-bearing capacity as it is compressed. Variable-rate coil springs are frequently employed in chassis systems that handle significant loads on occasion.

How Do Springs Work?

The concept of sprung-to-unsprung weight ratios is used to soften a vehicle???s ride. A farm wagon represents unsprung weight with no springs. If springs are fitted between both the chassis and axles, the sprung-to-unsprung ratio may be 90 percent for the chassis weight and 10% for the axle and wheel weight in this sample.

The springs start to absorb the shock of striking anomalies in the roadways as a vehicle speeds up. A stronger spring rate is necessary to maintain the axles and wheels in touch with the road surface as the vehicle speeds up. As a result, high-performance automobiles have firmer suspension systems than conventional passenger cars.

Shock absorbers must be employed to moderate the compression and extension cycles of a compressed spring since they will extend violently. The abrupt compression and spring extension without dampening would cause a car to give up control over a bumpy road surface.

The vehicle's ride, steering responsiveness, and handling control will worsen when rebound control deteriorates because of normal shock absorber wear. Tire wear will also be increased due to tire scuffing produced by suspension geometry that is out of its typical range. This is why shock/strut manufacturers are keen on regularly inspecting and replacing worn parts.

In general, the shock absorber's extension and compression properties must match the spring's compression and extension qualities. For regular driving, less dampening or rebound management may be necessary because stiffer springs do not usually experience high ranges of motion.

Softer springs, on the other side, may need more dampening since they undergo greater compression and extension, putting more strain on the shock absorber. It's important to note that every spring or shock absorber kit for performance purposes must also contain a sway bar.

For optimal handling, you must tailor load-bearing capabilities and driving comfort, spring rate, shock absorber dampening, and sway bar capabilities to vehicle weight, chassis architecture, and traffic conditions in any upgrade operation.

Find High-Quality OEM Springs and Components Only at Vivid Racing

From fitment help from our in-house experts to shipping packages, we'll take care of you and your OEM Springs every step of the way. We know how much of a financial investment you're making in a set of OEM Springs, accessories, and upgrades. In return, we'll deliver a service and product that is second to none.

At Vivid Racing, we love cars. They are our vice in life. We love the automotive community and love our customers who think like us.

Finding a perfect aftermarket product is not an easy job. We fully understand it, and we are here to help you find the best modifications for your car.

We specialize in double takes! Our passion is simply helping you build the car you always dreamed of. Everyone has their favorite look, color, effect, and desires, and we are here to help you achieve your goal.

Vivid Racing ensures that they meet the customer's expectations regarding quality, size, and strength.

The company always provides quality OEM Springs for applications that need speed and good looks.

Vivid Racing carries high-performance parts for almost any need. Click these links to choose from our selection of Body Kits, Big Brake Kits, Seats, Custom Wheels and Tires, Engine Parts, Exhaust Parts, Intakes, Suspension, and Transmission Parts.

Buying from Vivid Racing is the best choice you can make. We back every part we sell with our guarantee of satisfaction.

Buy online or give one of our world-class sales professionals a call at 1-480-966-3040. If you don't see what you are looking for, Call Us.

We can help. Vivid Racing was voted #1 in customer service nationwide!

Vivid Racing carries Performance Ignition Parts from all the top manufacturers in the automotive industry. Our manufacturers include Bosch, Delphi, Eurospare, Karlyn STI, NGK Spark Plugs, and many more!

Hands-On Experience and Professionalism are what make us the best.

Are you tired of paying overly inflated prices that the dealers charge for their parts? Vivid Racing can save you up to 60% off the dealers' prices. Click here to visit our OEM PARTS STORE.