VR Forged Cat 2021
  See more parts for your Dodge Ram 2500

SuspensionMAXX Extreme Duty MAXXLinks for 06-10 Ram 4x4 2500/3500 Mega Cab Lifted 4 Inch or More Center to Center of 8.0 inch

$157.49 Sale:$149.99

SuspensionMAXX

Model #SMX-122780EX

Help me decide

Shopper Award

SuspensionMaxx Is Proud To Introduce Our Extreme Duty Sway Bar Links. Designed For Lifted Dodge Ram Trucks That Do Not Use A Sway Bar Relocation Brackets.

The Extreme Duty Sway Bar Links Are Based Off Our Original Maxx Link Patented Design But Utilize A 33 Percent Larger and 50 Percent Stronger Configuration For Lifted Applications. The Higher Roll Center Of Lifted 2500 and 3500 Trucks Puts Higher Dynamic Loads On The Stabilizer Links. Having A Strong Sway Bar Link That Can Handle These Extreme Loads Without Breaking Is Critical.

The Extreme Duty Sway Bar Links Are Built For These Conditions. Extreme Duty Sway Bar Links For 2006-2010 Dodge Ram 2500/3500 With Approximate 4.0 Inch Of Lift.

Center To Center Measurement Of 8.0 Inch Sold In Pairs. Wear Prone Stock Ball Socket Is Replaced With A Long-Lasting, Simple and Robust Design. Thermoplastic/Urethane Bushings Perform Better and Last Longer Than Original Equipment Rubber Design. Features Include 4140 Alloy Steel Eyelets, Drawn Over Mandrel Steel Tubing and Grade 8 Bolts. Direct Replacement For OE Sway Bar End Links-Measures 8.0 Inch Center To Center. Maintenance-Free, Corrosion Resistant, and Wont Squeak Or Rattle. Excellent SuspensionMaxx Customer Service and Technical Support. 100 Percent American Made and Covered By The Maxxlinks Limited Warranty.

Maxxlinks SMX-1227 Are Engineered To Directly Replace The Stock Sway Bar Links On 2006-2010 Ram 4X4 2500/3500 Including Mega Cab Models.

Maxxlinks Heavy Duty Sway Bar End Links Are Your Solution To Weak Original Equipment Sway Bar Links. Instead Of Using A Ball and Socket Design That Is Prone To Rust and Deterioration, We Implement A Rubber Bushing That Provides Needed Articulation Without Corrosion and Premature Wear.

Maxxlinks Remain Tight and Free Of Play Much Longer Than The Stock Links, and They Wont Rattle Over Bumps. Rather Than Frequently Replacing Your Oe Links, Enjoy The Cost Efficiency Of Long Lasting Maxxlinks.

Maxxlinks Heavy Duty Sway Bar End Links Use Thermoplastic/Urethane Bushings To Perform Better and Last Longer Than The Original Equipment Ball-In-Socket Design. Eyelet Links Are Manufactured With Ultra-High Strength 4140 Treated Alloy Steel and Electroplated With Yellow Zinc Dichromate For Corrosion Resistance. Shaft Sections Are Made From Drawn Over Mandrel Steel Tubing and Grade 8 Bolts For Durability. SMX-1227 Also Features An Extra Heavy Duty Mounting Links Which Are Required For This Application. Maintenance Free Maxxlinks Come Complete With Stainless Steel Washers and Locking Fasteners.

Maxxlinks Can Be Used As High-Quality Replacement Parts Or As A Preventative Maintenance Measure.

Maxxlinks Heavy Duty Sway Bar End Links Simply Replace Original Equipment Sway Bar End Links. No Drilling Is Required. Installation Takes Just Forty Five Minutes To An Hour and Is Supported By The SuspensionMaxx Technical Support Program. SMX-1227 Directly Replaces Dodge Part Number 68001734Ab. 100 Percent Manufactured In The Us and Covered Under The Maxxlinks Limited Warranty.

Details:

  • Fits 2006-2010 Dodge Ram 2500, 2006-2010 Dodge Ram 3500
  • Position Front
  • Drive Type 4X4
  • Material 4140 treated alloy steel
  • Center to Center Measurement 8.0 inch
  • Bushing Material Thermoplastic/urethane
  • Bolt Grade 8
  • Bolt Size 0.5 inch
  • Sold As Kit
  • Quantity Per Kit 2 Sway Bars

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2006-2007
Dodge Ram 2500

2006-2007
Dodge Ram 3500

Check out these other great products