See all Wheels by Size products

Work Durandal DD5.2 Wheel 18x7

$570.00

Work Wheels

Model #WW-DD5.2-18-7


Shopper Award
The first model in the Durandal series is the Durandal DD5.2, which is eye catching with its bladed split spoke design. Due to the intricate nature of the center disk, WORK is able to customize to a fine degree while showcasing the quality of our machining work. The WORK Durandal DD5.2 can be done in either Full Reverse barrel (18" + 19" + 20") or Step Rim barrel (20" + 21"). Both of these barrel options come in an anodized polished barrel which features a solid rim flange for strength. Due to its two piece construction, you can customize offsets within 1mm increments, allowing for fine tuning of wheel fitment. Included with wheel: Durandal center cap + valvestem. Sizing: 18"/19"/20" (Full Reverse), 20"/21" (Step Rim). Standard PCD is 4x100, 5x100 and 5x114.3 but also available in custom PCDs 5x110, 5x112, 5x115, 5x120 and 5x120.65. TPMS (Tire Pressure Monitoring System) hole can be drilled at time of order. If no request is specified, wheel will be drilled only with standard hole for WORK valvestem.

Features:
  • Size: 18x7
  • Standard Bolt Pattern: 4x100, 5x100 or 5x114.3
  • Custom Bolt Pattern: 5x110, 5x112, 5x115, 5x120 and 5x120.65
  • Standard Disk Offsets(mm): +40 ~ +34.
  • Deep Rim Disk Offsets(mm): +47 ~ +41.
  • Big Caliper Disk Offsets(mm): +30 ~ +24.
  • Colors: Calm Silver Cut Clear, Black Polished or Black Chamfer Machining.
  • Anodized Polished Barrel.
  • Durandal center cap: Silver, Black or Red.
  • WORK Valvestem.
  • TPMS hole drilled if needed.
Notes:
  • Please select options before placing order!
  • 4x100 only comes in Standard and Deep Rim Disk.
  • Additional TPMS hole can be drilled at time of order. If no request is specified, wheel will be drilled only with standard hole for WORK valvestem.
  • Additional TPMS hole can be drilled at time of order. If no request is specified, wheel will be drilled only with standard hole for WORK valvestem.
  • Proposition 65

    /!\ warningWARNING: Cancer and Reproductive Harm

    https://www.P65Warnings.ca.gov

Work Wheels is 100% Japan's premier manufacturer of high quality automotive custom made performance wheels. Work produces a wide range of one piece monoblock, two-piece modular, three-piece modular and forged center wheels aimed at the top end of the aftermarket wheels and custom built wheels for European, American, Italian and Japanese cars.

Based on sound engineering and high technology Work Wheels have developed a line of wheels offering attractive design and large range of fitments. This large range enables fitments ranging from standard to aggressive depending on your requirements.