Complete Performance Kit for Your Truck

Are you in the market for a kit that truly has it all? Look no further! This amazing kit features a mandrel-bent 4.5-inch intake tube designed for impressive airflow gains. Plus, with HSP's signature heat shield box, you'll never have to worry about unwanted hot air sneaking into your cold air intake. Did you know that for every 1-degree increase in intake air temperature, you could lose up to 3 horsepower? Let’s keep that power intact!

Turbo Mouthpiece for Enhanced Functionality

Our high-flow turbo mouthpiece allows you to reroute your factory PCV system and remove the factory resonator box. This means you can say goodbye to unwanted engine oil gumming up your turbo and intake system (just a heads up, the PCV re-route is sold separately—check out 003-1-HSP for that!).

Top-Quality Tubes and Easy Installation

This kit also includes 3-inch mandrel bent hot side and cold side tubes, along with an easy-to-install two-piece Y-bridge. We’ve made sure to use race-proven 5-layer silicone boots to guarantee a great fit that you can rely on. Unlike the factory hot side intercooler tube, which is only 2.25 inches in diameter and has a 90-degree boot at the intercooler that can fail, our design routes the hot side tube directly into the intercooler. This results in lower temperatures, improved airflow, and better clearance in those tight spots.

Leak-Free Seal and Durable Up Pipes

Our bolted-together two-piece Y-bridge makes installation a breeze, ensuring a leak-free seal that won’t leave you stranded. To help with exhaust gas flow, we’ve included factory replacement 2-inch up pipes made from .120-inch wall tubing, featuring the toughest bellows available to ensure they last as long as your truck.

Stylish and Functional Additions

When it comes to aesthetics, we’ve got you covered with our forward-facing thermostat housing that includes a coolant return to keep your VGT turbo running cool. Is your factory coolant tank looking a little worse for wear? We’ve also included a replacement coolant tank that not only looks great but is made from all-aluminum with an integrated low coolant sensor.

Included Components

• 3x 3 inch x 4 inch Straight boot
• 7x 3 inch T-bolt Clamp
• 1x 2.25 inch - 3 inch Reducer boot
• 1x 2.25 T-bolt Clamp
• 1x 1/8 inch NPT Brass Plug
• 1x Bridge neck O-ring
• 2x 5/8 inch Worm Gear Clamp
• 2x Bridge neck stud
• 2x Bridge Neck 12-point Nut
• 2x M4x.7x10mm Bolt
• 3x 10-32 x 3/8 inch Button Head Screws
• 4x 1/8 inch Aluminum Rivet
• 1x 4 inch - 4.5 inch Reducer Boot
• 1x 4 inch t-bolt clamp
• 1x 4.5 inch T-bolt Clamp
• 1x 4.5 inch Filter
• 1x Turbo inlet o-ring
• 1x Radiator cap
• 5x 1/2 inch Worm gear clamp
• 1x 1 inch Worm gear clamp
• 1x 1/2 inch NPT float switch
• 1x Low Coolant sensor
• 1x Thermostat housing o-ring
• 4x M8x1.25-25mm Socket cap bolt
• 4x M6x1.0-18mm Socket cap bolt
• 1x M14x1.5 to 3/8 inch Hose Barb
• 1x M14x1.5 Metric Port Plug
• 1x Metric Bonded Seal 14mm
• 1x 1.75 inch x 3 inch Straight Boot
• 1x 1.75 inch 90 degree Boot
• 4x 1 3/4 inch Worm Gear clamps
• 2x Up-Pipe Gaskets (Manifold Side)
• 2x Up-Pipe Gaskets (Turbo side)

Compatibility

This kit is compatible with:

• LBZ: 06-07 VIN Code 2 or D

Wondering how to find your VIN code? The engine code is determined by the 8th character of your VIN number, while the 10th character indicates the year of your truck.