All-in-One Performance Kit

Are you on the hunt for a kit that truly has it all? Look no further! This incredible kit features a mandrel bent 4 1/2 inch intake tube designed for impressive airflow gains. Plus, with HSP's signature heat shield box, you can say goodbye to unwanted hot air sneaking into your cold air intake. Just a single degree increase in intake air temperature can lead to a 3hp loss—so keeping it cool is key!

Turbo Mouthpiece & PCV System Reroute

This kit also includes HSP's high-flow turbo mouthpiece, which allows you to reroute your factory PCV system while removing the factory resonator box. This means no more engine oil gumming up your turbo and intake system! (Just a heads up, the PCV re-route is sold separately; check out part number 003-1-HSP.)

Superior Tubing & Easy Installation

Included are our 3-inch mandrel bent hot side and cold side tubes, along with a user-friendly two-piece Y-bridge. We’ve designed it with race-proven 5-layer silicone boots, ensuring a snug fit that won’t let you down. Unlike the factory hot side intercooler tube—which is only 2.25 inches in diameter and has a 90-degree boot prone to failure—our solution runs straight into the intercooler. This design provides lower temperatures, better airflow, and extra clearance in tight spots.

Reliable Up Pipes

To help expel exhaust gases efficiently, this kit features factory replacement 2-inch up pipes. Crafted with .120 inch wall tubing and the toughest bellows available, they’re built to last as long as your truck. And for those who care about aesthetics, we’ve included a forward-facing thermostat housing with coolant return to keep your VGT turbo running nice and cool.

Stylish Coolant Tank

If your factory coolant tank is looking a bit worn, don’t worry! We’ve got you covered with a sleek factory replacement coolant tank. Made from all-aluminum and featuring a low coolant sensor, it’ll keep your engine bay looking sharp.

Included Components

• 3x 3 inch x 4 inch Straight boot
• 7x 3 inch T-bolt Clamp
• 1x 2.25 inch - 3 inch Reducer boot
• 1x 2.25 inch T-bolt clamp
• 2x 5/8 inch Worm gear clamp
• 1x 1/8 inch NPT Brass plug
• 1x Bridge Neck O-ring
• 2x Bridge neck stud
• 2x Bridge neck 12-point nut
• 2x M4x.7x10mm bolt
• 3x 10-32 x 3/8 inch Button head screw
• 4x 1/8 inch Aluminum Rivet
• 1x 4 inch - 4.5 inch Reducer boot
• 1x 4 inch T-bolt clamp
• 1x 4.5 inch T-bolt clamp
• 1x 4.5 inch filter
• 1x Turbo inlet o-ring
• 1x radiator cap
• 5x 1/2 inch worm gear clamp
• 1x 1 inch worm gear clamp
• 1x 1/2 inch NPT float switch
• 1x Low coolant sensor
• 1x Thermostat housing o-ring
• 4x M8x1.25-25mm Socket cap bolt
• 4x M6x1.0-18mm Socket Cap bolt
• 1x M14x1.5 to 3/8 inch hose barb
• 1x M14x1.5 Metric Port plug
• 1x Metric Bonding seal 14mm
• 1x 1.75 inch x3 inch Straight boot
• 1x 1.75 inch 90 degree Boot
• 4x 1 3/4 inch worm gear clamp
• 2x up-pipe gasket (turbo side)
• 2x up-pipe gasket (manifold side)

Compatibility

This kit is compatible with:

• LMM: 07.5-10 VIN Code 6

Wondering how to find your VIN code? The engine code is determined by the 8th character of your VIN number, while the 10th character indicates the year of your truck.