See more parts for your Dodge Ram 2500

aFe Bladerunner Intercooler Dodge Ram 2500 3500 Commins diesel L6 5.9L 94-02

$2,224.99 Sale:$1,779.99

AFE

Model #46-20062

Help me decide

Shopper Award

This Bladerunner Intercooler represents the next generation of intercoolers. The Bladerunner intercoolers utilize a 3" bar and plate design that is 37% larger than stock and outflows OE style tube and fin core designs by 31%! The unique Bladerunner end tanks are constructed out of 3/16 TIG welded aluminum plate tanks that incorporate three multi-directional vanes. The Bladerunner MDV technology is used to direct hot air flow through the entire intercooler core. This allows for greater cooling than competitors units. The use of the 3" bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. Four tapped 1/8" ports are supplied on the intercooler tubes for easy installation of gauges or nitrous oxide systems. Each Bladerunner Intercooler uses billet aluminum inlets and outlets for superior strength and durability. This intercooler also features 3" inlet/outlet connections mated to oversized boost tubes, included. 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. The intercooler tubes provided are constructed of 3" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Comes complete with 4-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. The Bladerunner intercooler is test pressure rated at 200psi which is perfect for high boost applications. Don t waste your time and money on modified factory intercoolers. Invest in the aFe Bladerunner intercooler, the most sophisticated intercooler design on the planet.

Features:

  • Utilizes a 3" bar and plate design that is 37% larger than stock.
  • 100% TIG-Welded by certified craftsmen.
  • Pressure rated at 200psi.
  • Three multi-directional vanes.
  • 3" bar and plate core design.
  • Four tapped 1/8" ports.
  • Uses billet aluminum inlets and outlets.
  • 3" mandrel bent powder-coated stainless steel tubing.
  • 4-ply heavy duty couplings.
  • Constant tension T-bolt clamps.
Fitment:
  • Dodge, Ram 2500 and 3500, Commins diesel L6 5.9L, 1994-2002
For Install Instructions CLICK HERE

Note: Legal in California only for racing vehicles which may never be used upon a highway.

Other Part Numbers:
AFE #afe46-20062

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1994-2002
Dodge Ram 2500

1994-2002
Dodge Ram 3500

Warranty
  • aFe warrants our products to be free from manufacturer's defects due to workmanship and materials.
  • The warranty period begins on the original invoice date and covers the applicable period listed below.
  • This warranty applies only to the original purchaser of the product and is non-transferrable.
  • Proof of purchase of the aFe product is required for all warranty claims.
  • Warranty is valid provided aFe instructions for installation and/or cleaning were properly followed.
  • Proper maintenance with regular inspections of product is required to insure warranty coverage.
  • Damage due to improper installation, abuse, unauthorized repair or alteration is not warranted.
  • Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe product is not covered under this warranty.
  • All warranty is limited to the repair and/or replacement of the aFe product.
  • All products sold under aFe's Private Label Program do not carry an aFe warranty.
  • All items purchased labeled "Closeout" or "Overstock" are final sale. No returns will be accepted.
  • All items listed as "Race Only" are not covered by aFe's warranty.
  • Click Here for the list of products accepted

Check out these other great products