$129.00
Model #057028
Free Shipping
The GrimmSpeed MazdaSpeed 3 Boost Control Solenoid is designed to work with your factory computer (requires tuning). It will not reduce the life of your factory computer because it is designed to draw the same ammount of power as the factory BCS but flows better and reacts faster. It plugs in and requires no splicing or soldering of resistors. With the included bracket you can bolt it in, plug in the connector, and start tuning for fast boost response, increased boost pressure and free up lots of power. Planning on returning the car to stock? Just reverse installation.
Why run an Electronic BCS over a Manual Boost Controller?
A MBC allows you to run higher than stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job at this but if boost is available under the MBC setting it will give you that full boost. So for instance, you set your MBC to 18psi because from 3000-6000rpm thats what you want. But then say you get detonation with 18psi when you are at 7000rpm unless you are below 16psi. With a MBC, you do not have this control so you are forced to run 16psi through the entire rev range. With an electronic boost controller you could run 18psi from 3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU which will allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control. Revolutionizing the boost solenoid market, we have created model specific install brackets that allow you to directly fit our Boost Solenoid into your MS3 for a factory fit. No more Zip-tying! We give you the factory fitment you have been waiting for.
Staying with the OEM fitment theme, our Boost Solenoid uses a Mazda style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the oem wiring and crimping wires together!
Also new to the Mazda boost solenoid market, we have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel plated brass so you don t have to worry about them snapping off like the plastic hose fittings!
Features:
Other Part Numbers:
GrimmSpeed #grm057028
WARNING: Cancer and Reproductive Harm
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
2004-2017 Mazda Mazda 3 |
Mazda 3 | 2004-2017 |
Grimmspeed is an automotive aftermarket company that was founded in 2006 by Justin Grimm. They specialize in creating parts for the exhaust system for various automotive vehicles. Grimm has always had this passion for cars and had always wanted to improve his vehicle’s performance. After numerous trials, he was able to perfect his craft and later on decided to turn it into his career. Today, they have become one of the leading brands when it comes to producing high-performance exhaust systems.
The company initially manufactured parts for Subaru. But as the company expanded, they started offering parts for other brands such as Ford, Mitsubishi, Hyundai, and Mazda. They now offer parts such as intercoolers, intake, exhaust, engine pulleys, gaskets, boost controllers, phenolic spacers and so much more.
Grimmspeed never stops in finding ways to produce innovative products and is always on the push to keep their products up to date. With the rapid change in automotive technology, it is a must that their product is able to adapt to this change for it to satisfy the demand of its users. This is the reason why the company has gained the trust of many tuners all around.
Built by an enthusiast for fellow enthusiasts.
If you want a product that is designed to improve the performance of your vehicle, then Grimmspeed is the brand for you. To know more about Grimmspeed, visit Vivid Racing and check out their list of products that would fit your specific needs.