RPG Off-Road Fast Intentions Bronco 6G Axle-Back Exhaust Straight-Cut Tip Non Polished Stainless Steel Ford Bronco 2021+

Fast Intentions is proud to present our 2021+ Ford Bronco 2.7L & 2.3L Axle-Back Exhaust System. This axle-back exhaust system is the premier upgrade for all 6G full-size Ford Bronco owners looking to maximize the performance, and drastically improve the sound from their V6 EcoBoost engine with a simple bolt-on upgrade. Built as a direct OEM replacement, our axle-back exhaust system is easy to install with simple hand tools; no cutting or welding required. Install can be performed without a lift in under an hour. All of the exhaust components are T-304 stainless steel, featuring a feed tube in 2.75" diameter, mandrel bent in one piece to maximize exhaust flow, durability and build efficiency. The internal flow divorced design of our muffler has targeted and reduced the infamous ?EcoBoost buzz? without hindering performance. A milled/brushed finish on the muffler allows for a clean and subtle look from behind. Two tip options are available: slash cut to mimic a true turn-down, or straight-cut to mimic the OEM tip. Both are adjustable through the use of our Accuseal exhaust clamp, which allows the end user to fine tune the tip height to their liking. Overall, this axle-back will increase ground clearance over the OEM system. This axle-back exhaust system is unobtrusive at idle and cruising speeds but comes to life at moderate to full throttle. With the addition of our simple bolt-on axle back exhaust system, you will increase your performance by 14HP / 34LB TQ, drastically improve the interior/exterior sound, without inviting the EcoBoost buzz along for the ride, increase your ground clearance, and improve the overall look of the back of your full-size 6G Ford Bronco.

Tip Style: Slash-cut (Turn-down style)
Finish: Non Polished Stainless Steel

Features:

• Direct OEM replacement: no cutting or welding required; no lift required; rear bumper removal only required on the 2.3L, and full installation can be performed in under an hour - D.I.Y. Installation
• 2.75" T-304 mandrel bent stainless steel tubing; maximizing exhaust flow; maximizing durability and creating build efficiency.
• 5" x 9" x 16" oval stainless-steel perforated core muffler; proprietary internal core technology: single 3.0" - dual 2.5" - single 3.0".
• 2 tip options: 3.0" slash-cut, or 3.0" straight-cut. Either option is available at no additional charge.
• Retains all factory mounting locations and rubber hangers.
• All connection points are precision Tig welded.
• Optional high-temperature silver black ceramic coating available. Black ceramic coating can withstand heat up to 1600 Degrees
Fahrenheit. This is a thermal barrier coating, designed to keep the heat in the exhaust system, and exhaust velocity up.
• Limited 3-year warranty on all welds, craftsmanship, mufflers and tips.
• Application Specific: 2021+ Full-size Ford Bronco 2.3L & 2.7L.
• Not compatible on Ford Bronco Sport.
• Hardware and installation instructions are included.
• Hand built in the USA.

Details:

• An increase 14 rear wheel horsepower & 34-foot pounds of torque over the OEM axle-back exhaust.
• In conjunction w/Burger Tuning JB4: An increase of 42 rear wheel horsepower & 72-foot pounds of torque over the OEM axle-back exhaust.
• Results were performed on Map 2.
• Improved sound over the OEM axle-back exhaust; a clean, smooth and refined exhaust note, without the EcoBoost buzz. Note: sound is subjective.
• Improved ground clearance throughout the entire axle-back exhaust system.
• Reduction in EGT (Exhaust Gas Temperature) by freeing up back pressure.
• 2.7L: 17.6 lbs./7lbs. lighter than the OEM axle-back.
• 2.3L: 17.6 lbs./3lbs. lighter than the OEM-axle-back.

Fitment:

• Ford Bronco 2021+