Universal Cables, Push-Pull Parachute 10-32 144 Inches Long 80 CablesFeatures:
- Quantity Per Package: 80 cables.
- Product Name: Parachute Cable Assembly
- Cable Length: 144"
- Thread: 10-32 RH on one end, bare wire output on the other end
- Cable Travel: 3"
- Linkage End: (1) plated 10-32 RH jam nut
- Bend Radius Minimum: 6"
- Maximum Input Load: 75 lbs
- Operating Temperature Ranges: -65° F to 225° F
Notes:- The usable stroke 'travel' of a cable should be CENTERED on the travel range
- Do Not Bend any of the visible metal pieces, or any of the intersections of these visible metal pieces; these components are designed for a push-pull load only. Only install cables when all motors, engines, and power sources are turned OFF.
- Each cable has a specified minimum bend radius. Failure to observe this minimum can at a minimum increase the force it takes to move the cable, and at worse, can cause the cable to kink inside of the conduit, which in turn can cause the cable to fail and/or not operate properly
- Do NOT adjust any cable length (ie: turning the ball joint or spherical rod end bearing or clevis) unless all power sources, engines, motors, etc are turned OFF.
- Cables wear out. Avoid putting cables in applications where a failure to operate would cause serious injury, death, or loss of significant operator control of the machine or vehicle. Maximize cable life by using larger cale sizes, shorter lengths, few degrees of bends, low loads, minimal exposure to the elements, etc.
- Use physical stops in your cable system to make it physically impossible to exceed the load rating or travel rating of the cable.
- If the cable losses efficiency (ie: becomes difficult to move), replace the cable IMMEDIATELY.
- Dirt, contaminants, temperature, moister, and cycles of use, ALL effect cable life. Avoid exposing the cable to gasoline, oil, fuels of any kind including diesel, biodiesel, water, dirt, fertilizer, road salt, and chemicals of any kind.
- Do NOT attempt to lubricate the cable.
- If the cable becomes frozen, or has been frozen with moisture inside of it, the cable MUST be replaced. Do NOT attempt to thaw or dry out cables.
- Do NOT remove the seals or boots provided with the cable. Replace immediately any cables that have lost or removed boots and/or seals.
- Do NOT attempt to modify or repair a cable.
Who is Steinjager?
Steinjager is an aftermarket company that was founded in 2013 by the people behind Midwest Control Products Corp. The company aims to provide car owners with high-performance products that are applicable for motorsport use. Today, Steinjager has made a name for itself and has become one of the go-to brands when it comes to offroad parts and accessories.
A Company Built By Enthusiasts For Fellow Enthusiasts
The company offers a wide range of products, ranging from tubular fabrications, lift kits, push & pull cables, spherical rod end, bearings, and other suspension parts. Steinjager is composed of some of the industry’s best designers and craftsmen who have over 40 years of combined experience and have their own personal motorsport experiences as well. This allows them to have a better understanding of what their customers would want, which helps them create a better product.
Designed To Be Tough
All their products are designed to not just perform well but should be reliable at the same time. It should be able to handle whatever punishment it is subjected to, whatever environment it may be. Their goal is to create parts that would allow its user to push the vehicle to its limits while keeping their safety in check.
Purchase Steinjager Products At Vivid Racing
If you are in search of quality parts that are designed to be tough, then Steinjager is the brand for you. They may be a new player in the industry but this has not prevented them to manufacture parts that have the same, or if not better, performance compared to their counterparts. To know more about Steinjager, visit Vivid Racing and check out their list of products that would fit your specific need.
Warranty & Warnings
Steinjager products are an aftermarket accessory and are not designed by the vehicle's manufacturer for use on this vehicle. As such, the buyer assumes all risk of any damage caused to the vehicle/person during installation and/or use of this product. Steinjäger makes no claim as to suitability or legality of these products for use in on-highway applications. All Steinjäger products are for off-road use only.
Limited Warranty
Steinjäger offers a Limited Warranty against defects in materials and workmanship for the term of 12 months from the date of purchase of this product, and subject to receiving the mail-in warranty card from the customer within 30 days of the original purchase date from the authorzed Steinjäger dealer. This Warranty only applies to the original retail purchaser who retains ownership of the vehicle on which this product was originally installed. If Steinjäger determines that the product was defective, Steinjäger will repair, replace or refund the purchase price of the defective product at Steinjäger's sole discretion, which will fully satisfy and discharge any and all warranty claims. Any repaired or replaced product will be returned to the sender excluding the cost of freight. Products must be registered within 30 days of the original purchase date to qualify for warranty.
WARNING: Cancer and Reproductive Harm
