STM Tuned 3.5" Burned Blue No MAF Titanium SD Intake Mitsubishi Evolution VIII | IX 2003-2006

The STM Evo 7/8/9 3.5" Titanium SD Intake was designed to be compatible with all bolt on, stock location turbos. From stock to FP and beyond this one fits the bill. With its 3.5 inch Inside diameter and massive Air filter, it'll be sure to outflow any turbo out there and look good doing it!

Speed Density:
This intake pipe does not work with the stock MAF, and is designed for speed density only.

ACD:
The STM 3.5" Intake Pipe will fit both Evo 8 and 9 and will clear the ACD reservoir.

Burned Titanium:
Each intake is torch burned for a one-of-a-kind finish to show off in your engine bay!

What's the Bung For?
Adding the -10AN bung on the underside of the pipe is allows you to use the STM Sealed Catch Can which vents from the can to the intake pipe.

Options:
-10AN Bung
Coupler Size for Turbo

Features:

• Designed for Bolt-On Turbos
• For Speed Density Only
• Does not work with the MAF
• Fits both ACD and NON-ACD models.
• Can be used with the STM Sealed Catch Can (with -10AN Bung)
• 3.5" Tig-Welded Pie Cut Titanium
• Burned
• Huge 9" K&N Air Filter
• Fits ACD & Non-ACD
• Optional -10AN Fitting for STM Sealed Catch Can
• For Speed Density
• Includes:
  • (1) K&N Air Filter (RE-0920)
  • (1) STM 3.5" Titanium Pipe
  • (1) STM Reducing Coupler
  • (2) Worm Clamps for Coupler
  • STM Products are made in the USA!
• Lifetime Warranty on STM Parts to the original purchaser against manufacturing defects.

• Mitsubishi Evolution VIII | IX 2003-2006

• This intake pipe is hand-made just for you! Please allow 2-4 weeks of build time before shipment.
• If you're not using a catch can, we would suggest to vent your crankcase via the valve cover. This is the K&N Breather Filter you'll need: 62-2470