Bilstein B16 (PSS9) suspension kits feature ride height adjustability with 9-stage manually adjustable dampers in an OE quality, direct fit package. The 9-stage damping system adjusts both rebound and compression with each click to provide the best handling performance in any condition. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (PSS9) suspension kits are made in Germany and feature technology tested on the famed Nurburgring.
Performance Suspension System
- Internal Design: Monotube
- California Proposition 65: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
- Title: Bilstein Shock Absorbers
- Series: B16 (PSS9)
- Finish: Dampers: Zinc Plated/Springs: Blue
Front Lowered Height: 25-45mm, up to 775kg Axle Load
Rear Lowered Height: 25-45mm, up to 940kg Axle Load
Without Electronic Suspension
Fits position: Front and Rear
Other Part Numbers:
Bilstein Suspension #bil48-121897
6. Warranty Claim
6.1 The regulations as stipulated in the German Civil Code, as far as no other agreements have been made. If the contract conditions are meant shall be judged at time of risk transfer. In case of production according to the drawing submitted by the Customer we shall only be liable for the parts to be made in accordance with the drawing and not for their function. A guarantee is only granted if expressed by our legal representative, handed over in writing and identified as such. The warranty period shall be to 24 months after the risk has been transferred.
6.2 The Customer shall inspect the goods in accordance with § 377 HGB (German Commercial Code) and without delay give notification of any defects that are discovered
6.3 We must be given the opportunity to examine the notified defects. If defects are discovered and notified in time, at our discretion, the parts will either be reworked our replaced by us. If we fail to comply with our warranty commitments or fail to meet them in accordance with the contract, the Customer shall be entitled to rescission or to claim a reduction in price. Further claims are excluded, except for the claims set out in Section 9. Customer claims for other necessary expenditures, especially for transport, traveling, labour, and material costs are unacceptable, if the costs increase due to any alterations with regard to the place of destination which are not relevant to contract.
6.4 As long as the parts supplied by us are directly or indirectly delivered from our immediate Customer to his final Customer, instead of sections 6.1 to 6.3, the legal regulations will apply. We shall, however, be liable for damage claims only as set out in section 9. 9. Compensation, Liability
9.1 The Customer shall bear the responsibility for the proper design including observation of any safety regulations, selection of the material and necessary testing procedures, accuracy and completeness, supply regulations and for the documents and drawings that have been handed over and any facilities and parts provided to carry out the work even if changes are suggested by us which meet his approval. The Customer shall also be responsible for ensuring that information that he has provided does not infringe industrial property rights or other third-party rights.
9.2 The Customer shall indemnify us against any claims for compensation asserted against us by a third party which originate within the Customer's spheres of responsibility.
9.3 We shall only be liable to pay compensation for infringement of contractual, non-contractual or other advisory or other ancillary obligations
- in a case of intent,
- in a case of gross negligence on the part of executive bodies and accomplices,
- when and if a guarantee declaration has been explicitly confirmed by an executive body in writing,
- where a claim can be declared, based on the German Product Liability Act.
- in the case of culpable infringement of essential contractual duties, restricted to typical losses which were foreseeable when the contract was signed.
- where lives are harmed, in body or health, in a case of intent or negligence by executive bodies and accomplices.
Click to view the Warranty Information here
Click to view the Installation Instructions here