Kleemann Bench Flash Tuning

Many ECU's can only be flashed in "boot mode" which requires the ECU to be removed from the vehicle. Once removed from the vehicle, the cover is taken off and we utilize electronic bungy pins to connect to the circuit board to read the cars data. The ECU must be sent in to us which we can then bench flash the car and send the ECU back out to you.

#1 priority is our customer service to you! Our tuning is used worldwide. We can provide you a tuned file no matter the environment you live in. Upon ordering of this ECU Flash Tune, you will be required to send in your ECU. Once we receive the ECU and program it, we will ship it back to you via the method you select at checkout. This ECU cannot be flashed via the OBDII port. This requires the ECU to be mailed in to us to be benched flashed. Bench flashing requires the ECU to be opened. We DO NOT solder or modify your board in any way. Using a electrical contact pins, we tie into the boards programming mode to read and write the file. We do store your stock file if you ever want to revert. Because the ECU must be removed and opened, if you are concerned with warranty, you may want to speak with your dealership. Removing the ECU takes about 20 mins.

Kleemans philosophy is simple, but very important. A Kleemann upgrade will raise the performance of your Mercedes-Benz or AMG to another level, and their design will refine the appearance of the car significantly while still honoring the lines and shapes of the original vehicle.

Their goal is to enhance the best qualities of Mercedes-Benz and AMG cars, and even a full Kleemann conversion performed on a top-of-the-line model will never compromise style, safety or reliability. The combination of tremendous performance and everyday drive-ability that provides both joy in ownership and intense driving pleasure to their clients all over the world is what characterizes a Kleemann car.

Sort by:

Kleemann Bench Flash Tuning

Error: Failed to add product

Please refresh the page and try again.