- 1-480-966-3040 8am-5pm MST
- 1-480-966-3040 8am-5pm MST
- 0
Now Offering 0% Finaning With Affirm! Select Your Option At Checkout! - Learn More
$300.00
Model #VR-RAP-110
Hurry Low Stock
A cold air intake kit for the Ford F-150 2.7L or 3.5L EcoBoost is one of the first upgrades you should do to your truck. The twin turbocharged engine that powers the F-150 and the Raptor will benefit from the improved intake design giving you an overall better driving experience. The VR Performance cold air intake kit gives your EcoBoost better throttle response, allows the turbochargers to spool up quicker, as well as increase torque along with horsepower throughout the entire RPM range. As you go through the 10 speed transmission, you will hear the turbochargers spool up as they take in a much larger volume of air. When the driver is not heavy on the throttle, you can even expect a slight improvement to your MPG. As tested on a stock 2018 Ford Raptor running 91 octane while using our Mustang Dynamometer, the intake made a peak gain of 10 rear wheel horsepower (rwhp) while maintaining a midrange of 12rwhp. Torque jumped up 20ft/lbs over stock giving you more power off the line and when you need it most!
Vivid Racing's intake design and manufacturing is all done here in the USA. The custom high flow cone filter has a large diameter flange taking in air from 360 degrees around. The box design has been engineered to integrate with the factory air snorkel. The air filter is sealed off from hot engine air with a rubber gasket that is mounted to the one piece box. Connecting the air filter to the two turbochargers is a one piece, roto molded intake tube that splits off with a clean seamless merge. With this design, the VR intake tube flows over 100% more air than the stock intake tube. The intake is finished off with an integrated sensor mount, Vivid Racing silicone couplers, and required hose clamps.
Why Stock Intake is Weak:
A factory intake box can have restrictions from the stock air filter and intake tubes. Looking at the stock intake of the Ford F-150 EcoBoost, you will notice the corrugated tubes that connect the hard piping to the filter box. This design can cause turbulence to the air flow. When the air flow is disrupted, this affects performance as the air speed is slowed down. While air flow is very important, so is the amount of air that can be sucked into the turbochargers compressors. The stock intake features a flat panel filter design which is common in most vehicles. These paper air filters are non-reusable and do not have the best flow or surface area needed to gain performance.
Features:
Fitment:
Note:
WARNING: Cancer and Reproductive Harm
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2018-2019, 2021 Ford Expedition |
Expedition | 2018-2019, 2021 | |||
|
2015-2022 Ford F-150 |
F-150 | 2015-2022 | |||
|
2017-2020 Ford Raptor |
Raptor | 2017-2020 | |||
|
2018-2021 Lincoln Navigator |
Navigator | 2018-2021 |
VR Performance is, as the name suggests, the performance division of the Vivid Racing brand. Under the VR Performance line, we offer everything from blow-off valves, shift knobs, and brake lines to lowering links, springs, headers, and complete cat-back exhaust systems. Everything you could possibly need to amp the performance and riding quality of your vehicle is available through the VR Performance store. Born from a passion for going further and getting the most out of our vehicles, the VR Performance line will unleash the true potential of your ride in terms of aesthetics, power, and functionality.
VR Performance is well-known for its high-quality lowering links, which work with your vehicle's factory air suspension to seamlessly lower its ride height. The lowering links are fully adjustable and replace the stock ones which control the air ride. By changing the linkage length of the air ride sensors, this gives you a much more desired ride height in all modes. Best of all, these links snap right in place of the non-adjustable ones and fit in seamlessly for a simple installation process that is also easily reversible. These durable metal lowering links give your ride the perfect lowered look without that pesky wheel gap and delivers a smooth performance with the OEM system. Boasting a rigid construction, this product was made to withstand the elements of both daily and more spirited driving to deliver maximum performance for a long time.
VR Performance's latest release of cat-back exhausts is nothing less than exceptional. We offer a series of titanium and stainless-steel variants for a wide range of makes and models. Our highly sought after Valvetronic exhausts are designed to specifically increase the sound and performance of your particular vehicle. Crafted from high-quality materials, these exhausts feature brilliant robotic TIG welding as well as smooth bends to deliver optimal flow and power gains. And, thanks to the cutting-edge Valvetronic design, your OEM valves are reused so you can change the tone of your vehicle with just the push of a button. Electronic valves are placed on the outlet of the muffler which control the sound so you can go from mild to wild in seconds. When closed, the exhaust flow goes through the single outer tip which is quieter. However, when the valve is opened, the exhaust goes straight out to deliver an exhilarating tone that demands attention.
If you are looking to modify your vehicle's appearance, stance, or power, VR Performance has what you need with a comprehensive line of quality parts. Our latest product release includes a wide range of catbacks and lowering links for a number of different makes and models. No matter what you choose from our inventory, your vehicle is sure to thank you. Contact a Vivid Racing parts specialist today at (480) 966-3040 to learn more about any of the products listed on our site.
We Offer Aftermarket Warranties by Extend - View Here
***VR or AP Branded Item Warranty Terms & Conditions below. Please note we do not cover shipping to or from the customer. Products must be shipped back, inspected, where we then determine if the product needs to be repaired, replaced, or refunded if necessary.***
Vivid Racing offers a 1 year limited warranty on (non titanium) products and a 90 day warranty on titanium products under the VR Performance brand which covers manufacturing defects that prevent the item from being used for its intended purpose and application. Damages or issues found that are not directly caused by a manufacturing defect are not covered under any warranty offered by Vivid Racing.
Vivid Racing reserves the right to refuse warranty coverage for the following reasons.
Please note: In order for any claim to be submitted, proof of professional installation or its attempt must be provided. All Warranty claims must be submitted for review. If approved, an RMA number will be provided which MUST be included in the packaging. If not included your returned product will be refused. All return shipping costs to and from Vivid Racing are the responsibility of the customer or distributor initiating the warranty claim. If the product is determined to be covered under warranty Vivid Racing will repair the product within original spec, offer a replacement, or refund if needed to the original purchaser. Our warranty does not cover any labor, services, or related products to our product.
