.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Jeep Wrangler
Select the year of your Jeep Wrangler:
This heavy bracket is designed to replace the weak factory track bar bracket on the front 30 and Rubicon 44 axles in the Jeep TJ, LJ, XJ, and ZJ. The factory bracket often has a wallowed out hole allowing axle shifting and is one of the major contributors to the feared Death Wobble. This bracket replaces the factory bracket for better piece of mind. The 1/4 inch thick CNC precision cut and formed components of this setup ensure a quality, heavy duty solution.
Joint width is 1.66 inch, so use our Narrow Misalignment Spacers with 7/8 inch Heims if you are building your own Trackbar.
Features
Joint width is 1.66 inch, so use our Narrow Misalignment Spacers with 7/8 inch Heims if you are building your own Trackbar.
Features
- Heavy duty construction from 1/4 inch mild steel won't wallow out like factory bracket.
- Precision CNC laser cut and bent for great fitment.
- Possible solution to fix Death Wobble.
- Tab and Slots allow for perfect alignment and easy installation
- Replaces factory sway bar mount as well.
- Works great with an Artec truss
- Sold as kit
- This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is Not liable for improper installation.
- Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
- This bracket is Not bolt on and requires welding. Cutting off the factory track bar bracket is required and welding this in it's place.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
1997-2006 Jeep Wrangler |
Wrangler | 1997-2006 |
Artec Industries is a company that was founded in 2003 in Tucson, Arizona, and is known as Artec Welding back then. The company started when the company's president Artie Nuttall bought a 1987 4Runner to join his wife's family offroad excursion.
As a talented welder himself, he started welding structural and decorative projects for various high-end commercial and residential projects. But his passion for offroading has never left him.
So in 2010, Artec Welding was rebranded as Artec Industries and started developing products for the automotive industry.
From Building Houses To Building Offroad PartsThe company used its experience in welding to create some of the best offroad parts available in the market today. They offer parts such as ultimate high steer arms, quart crates, but they are better known for their axle swap kits and axle trusses.
Continuous Company GrowthAs more people patronize their products, there is a need for Artec to relocate to a bigger facility to accommodate their customers' growing demand. From a small garage, the company is now situated in a large facility in Salt Lake City, Utah, which is a strategic location that allows them to distribute their products more efficiently.
Purchase Artec Industries Products At Vivid RacingIf you are in the market for quality offroad parts, Artec Industries is the brand. Each part is carefully manufactured by the country's most talented craftsmen. It guarantees that you get the best product every time. To know more about Artec, visit Vivid Racing and check out their list of products that fit your specific need.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.