See more parts for BMW M3
Select the year of your BMW M3:
Product thumb
BBS RE-V7 Wheel 19x10 5x120 22mm Diamond Silver
$1410.00
Free Shipping

If you're into wheels that scream both style and performance, let me tell you about the BBS RE-V7. This isn't just another set of rims; it's a piece of racing heritage, designed with the same attention to detail that BBS has been known for since the early days of motorsport. You can see the influence of NASCAR in its design, and it really shows.

The first thing you’ll notice is that classic BBS cross spoke pattern. It’s iconic for a reason. This wheel doesn’t just look good; it’s built to perform. With the RE-V7, you’re getting a wheel that’s as much about function as it is about form. It’s made from high-quality materials that enhance durability while keeping the weight down, which is crucial for handling and acceleration.

Now, let’s get into the specs. These bad boys come in a slick Diamond Silver finish that not only catches the eye but also holds up against the elements. The size is 19x10, which gives you a nice wide stance—perfect for those who want to fill out their wheel wells without going overboard. The bolt pattern is 5x120, and with an offset of 22 mm, you’re looking at a fit that suits the BMW E46 M3 like a glove, especially on the rear. Just a heads up, if you're running a stock setup, you might want to check your clearance; they’ll clear 275s pretty comfortably with no rubbing issues.

These wheels are for those who don’t want to compromise on looks or performance. They’re a solid choice if you’re looking to upgrade your ride without losing that connection to the road. Just remember, while the images look great, the actual product may vary a bit—so keep that in mind when you’re making your decision.

In short, the BBS RE-V7 wheels are a blend of tradition and innovation, perfect for anyone who’s serious about their driving experience.

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle
2001-2006
BMW M3
BBS Wheels: A Legacy of Excellence
History of BBS Wheels

BBS Wheels, founded in 1970 in Germany, has been at the forefront of wheel design and manufacturing for over five decades. With a commitment to innovation and performance, BBS has established itself as a leading brand in the automotive industry. Their wheels have graced some of the most prestigious vehicles, including those in motorsport and luxury segments. The brand's dedication to quality and engineering excellence has made it a favorite among car enthusiasts and professional racers alike.

Categories of Parts BBS Wheels Are Known For

BBS offers a diverse range of wheels designed to meet the needs of various vehicles and driving styles. Their product lineup includes:

  • Forged Wheels: Known for their strength and lightweight properties, ideal for performance vehicles.
  • Cast Wheels: Offering a balance of affordability and performance, suitable for everyday driving.
  • Racing Wheels: Engineered for motorsport applications, providing maximum performance under extreme conditions.
What Makes BBS Wheels the Best

What sets BBS Wheels apart from the competition is their unwavering commitment to quality and performance. Each wheel is crafted using advanced manufacturing techniques, ensuring precision and durability. BBS wheels undergo rigorous testing to meet the highest standards of safety and performance, making them a trusted choice for both everyday drivers and professional racers. Additionally, their iconic designs enhance the aesthetic appeal of any vehicle, making a powerful statement on the road.

At Vivid Racing, we are proud to offer a wide selection of BBS Wheels, allowing you to elevate your vehicle's performance and style. Experience the legacy of BBS and discover why they are the ultimate choice for automotive enthusiasts.

Warranty / Compensation / Liability
  1. BBS GmbH offers a 5-year warranty period from the date of purchase to all final customers of "winter proof" BBS light alloy wheels with a production date after 01 January 2015 for all finish varieties, such as brilliant silver, platinum silver, satin platinum, diamond silver, satin black, satin titanium and crystal black. BBS guarantees that the products are free of defects in workmanship and material on delivery to the final consumer. Defects occurring within the warranty period will be removed at the expense of BBS within a reasonable period after notification by BBS's repairing the defective product or providing replacement. If a removal of the defect is not possible in the opinion of BBS, or feasible only with a disproportionate amount of effort, BBS may also refund the purchasing price. There are no further claims under this warranty.

    Not covered by this warranty are damages of any kind that occurred after delivery to the end consumer, normal wear, improper handling and use, incorrect assembly, and any deterioration of the light alloy wheels that is not caused by an initial defect.

    In case the light alloy wheels were installed to a vehicle that has neither a General Operating Permit (German abbreviation: ABE), nor a Technical Component Report (German abbreviation: TGA) or a Type Approval Certificate (German abbreviation: TTG), or if the requirements and recommendations in accordance with ABE or TGA/TTG respectively were ignored, the warranty shall lapse with immediate effect.

    Any re-varnishing of the light alloy wheels by a third party will void the warranty immediately. Warranty claims can be made on presentation of the original proof of purchase (receipt, invoice). For this purpose, please contact our service department or the specialist dealer or garage where you purchased the wheels.

  2. The purchaser is obliged to immediate confirmation of receipt of the goods and to examination of the goods after receipt. Patent defects must be communicated in writing by him to BBS immediately, latent defects within 5 working days after discovery, with specification of the invoice number. Otherwise the delivery shall be deemed to have been approved.

  3. The purchaser must give BBS an occasion to verify the objection, in particular by making the damaged goods and its packaging available for inspection by BBS. At the demand of BBS, the goods complained about must be sent back freight prepaid to BBS. In the event of justified complaint, BBS shall remunerate the costs of the most favourable shipping route; this does not apply when the goods is located at a place other than that of the intended use.

  4. Only the product description of BBS and only in case of written agreement entered into between BBS and the purchaser may be regarded as an agreed quality of the goods. Public statements, promotions or advertising messages never form a quality agreed upon. Statements on quality of the goods do not imply a guarantee (assurance) as set out in § 276 I BGB and/or § 443 BGB, unless a guarantee has been expressly agreed upon in writing. Information with regard to the deliveries of BBS are without any obligation by BBS and do not, even if they have been made in writing, imply an assurance of the quality of the goods or a quality agreed upon.

  5. In so far as the goods do have a deficiency, BBS is entitled at its choice to either supplementary performance in the form of a correction of deficiencies (rework) or to delivery of new deficiency-free goods (substitute delivery).

  6. When rework or substitute delivery is impossible, refused or for other reasons for which BBS is responsible does not take place or fails within a reasonable period determined by the purchaser, the purchaser can at his option either withdraw from the contract or reduce the purchase price. A time limit does not need to be set in the cases where this is not required by law.

  7. More extensive claims by the purchaser, particularly to damages instead of performance and to compensation for any other direct or indirect damage - including collateral or consequential damage, regardless of on which legal ground - are excluded. This does not apply when
    • BBS has maliciously maintained silence concerning a legal or material deficiency or has assumed a guarantee for its absence or the composition of the good;
    • the damage is due to the intent or gross negligence of BBS, of one of its legal representatives or vicarious agents or a negligent violation of essential contractual duties by BBS or these persons;
    • a culpable violation of duty by BBS or its legal representatives or vicarious agents led to a physical injury or harm to health;
    • liability is imposed in accordance with the product liability law.
    In the case of simple negligence, however, BBS's obligation to pay damages is limited to the amount of the foreseeable damage typical for such contracts.

  8. The provisions under section 6 above apply correspondingly for direct claims of the purchaser against the legal representatives and vicarious agents of BBS. Further compensation is precluded.

  9. Contractual penalties (liquidated damages, lump-sum compensation in damages, etc.), to which the purchaser sees himself exposed from third parties, can - independent of the other prerequisites - only be asserted against BBS as damages when this was preliminarily agreed in writing between the purchaser and BBS or BBS, prior to conclusion of the contract, was notified in writing of the (under circumstances threatening) contractual penalties which were agreed between the purchaser and a third party.

Check out these other great products