See more parts for Jeep Wrangler
Select the year of your Jeep Wrangler:
Product thumb
BDS Suspension 3 Inch Lift Kit | Disconnects | NX2 Nitro Series Shock Jeep Wrangler 4-Door 2007-2011
$626.92
Hurry Low Stock
Upgrade the ride and style of your 2007-2011 Jeep Wrangler JK 4 Door with this 3-inch coil spring lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes 3" Pro-Ride coil springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel. Also included are brake line brackets, alignment cams to fine tune front caster angles, and sway bar links.

In the rear the kit utilizes Pro-Ride coil springs, sway bar drop brackets, and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 3" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.



Features:
  • ProRide coil springs offer improved ride quality and more articulation
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Rear track bar bracket repositions rear axle under vehicle
  • Lower cam locks to correct caster for alignment
  • Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
  • Allows clearance for 35" tires
  • NX2 Nitro Series
    • Nitrogen-charged
    • Twin-tube design
    • 10-stage velocity-sensitive valving
    • Dual-welded ends for increased strength
    • 1-3/8-inch high-flow piston
    • Self-lubricating seals
    • Silver powder coat finish
  • Sway Bar Link: Disconnects
    • Gain 30 percent more axle articulation by disconnecting your front sway bar
    • Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
    • Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
    • Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability


Specifications:
  • Front Lift Method : Coil Spring
  • Front Lift Height : 3
  • Rear Lift Method : Coil Spring
  • Rear Lift Height : 3"
  • Shocks Included : Yes
  • Lift Height : 2-3.5"
  • Recommended Tires & Wheels (Trimming may be required):
    • 35 x 12.5 with 16 x 8 and 4.5 in. Backspace


Fitment:
  • Jeep Wrangler 4-Door 2007-2011


Note:
  • This kit is FMVSS No.126 Compliant
  • This kit is right hand drive compatible.

Other Part Numbers:
BDS Suspension #BDS1411H-BLDV

Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle
2007-2011
Jeep Wrangler

Check out these other great products