.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Ford F-100 Ranger
Select the year of your Ford F-100 Ranger:
Improve the ride and level out your 1983-1997 Ford Ranger 4WD truck with a 4-inch suspension lift kit by BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 31" tires.
Up front the lift kit includes Pro-Ride coil springs, heavy duty axle pivot brackets, radius arm drop brackets, forged pitman arm for steering correction, bump stop extensions and precision tuned NX2 nitrogen charged shocks.
In the rear the base kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro shocks.
A pair of full-length, truck-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Features:
Specifications:
Fitment:
Note:
Up front the lift kit includes Pro-Ride coil springs, heavy duty axle pivot brackets, radius arm drop brackets, forged pitman arm for steering correction, bump stop extensions and precision tuned NX2 nitrogen charged shocks.
In the rear the base kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro shocks.
A pair of full-length, truck-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Features:
- Easy, Bolt-on installation
- Pro-Ride dual rate coil springs ride smooth through any terrain
- Heavy duty steel drop brackets for proper suspension geometry
- Cast steel blocks provide level stance from front to rear
- NX2 Nitro shocks with vehicle-specific valving for better control
Specifications:
- Front Lift Method : Coil Spring
- Front Lift Height : 4"
- Rear Lift Method : Block
- Rear Lift Height : 3-5"
- Shocks Included : Yes
- Lift Height : 4-5.5"
- Recommended Tires & Wheels (Trimming may be required):
- 31 x 10.5 with 15 x 8 and 3.5 in. Backspace
Fitment:
- Ford Ranger 1983-1997
- Mazda B2300 1995-1996
- Mazda B3000 1994-1997
Note:
- Ball joint alignment cam will be required for alignment, these are available in the options section or from your local alignment shop.
- Extra cab models may not achieve stated height.
- Models equipped with a 2-piece driveshaft will require the carrier bearing crossmember to be lowered.
- Bronco II 1985-90 models with CV joint type drive shaft must be converted to an exposed joint shaft.
- Vehicles equipped with factory STX package will not achieve stated height
- The dual steering stabilizer listed in the accessories will not fit applications with a factory front sway bar.
Other Part Numbers:
BDS Suspension #BDS516H-BLDV
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Ford F-100 Ranger | 1996-1997 | Base |
| Ford F-100 Ranger | 1996-1997 | XLT |
| Ford F-100 Ranger | 1996-1997 | XL |
| Ford Ranger | 1983-1985 | XLS |
| Ford Ranger | 1983-1997 | XLT |
| Ford Ranger | 1983-1986, 1993-1997 | XL |
| Ford Ranger | 1983, 1985-1986 | Base |
| Ford Ranger | 1984, 1986-1992 | S |
| Ford Ranger | 1986-1997 | STX |
| Ford Ranger | 1987-1992 | Custom |
| Ford Ranger | 1988-1989 | GT |
| Ford Ranger | 1990 | S Plus |
| Ford Ranger | 1991-1993, 1997 | Sport |
| Ford Ranger | 1993-1997 | Splash |
| Ford Ranger | 1995 | XL Sport |
| Mazda B2300 | 1995-1996 | Base |
| Mazda B2300 | 1995-1996 | SE |
| Mazda B3000 | 1994-1997 | Base |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.