.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Jeep Gladiator
Select the year of your Jeep Gladiator:
BDS steps up the performance and capability of the Jeep Gladiator JT with a 3-inch suspension lift kit. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 35" tires at an affordable price.
The lift kit includes front and rear BDS Pro-Ride Coil Springs, a heavy duty adjustable front track bar is utilized to recenter the front axle, bump stop extensions, front lower control arm cam locks, JKS quicker disconnects to unlock the front suspension's potential to flex while maintaining quiet on road operation, rear sway bar links, and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features:
Specifications:
Fitment:
Note:
The lift kit includes front and rear BDS Pro-Ride Coil Springs, a heavy duty adjustable front track bar is utilized to recenter the front axle, bump stop extensions, front lower control arm cam locks, JKS quicker disconnects to unlock the front suspension's potential to flex while maintaining quiet on road operation, rear sway bar links, and your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features:
- ProRide coil springs offer improved ride quality and more articulation
- Sway bar quicker disconnects and extended rear link for improved offroad flex
- Front HD track bar to correction position the front axle and control lateral movement
- Lower cam locks to correct caster for alignment
- Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
- FOX 2.5 Performance Series
- 2.5-inch Impact extruded aluminum body
- Internal floating piston (IFP) monotube design
- Increased oil capacity of the shock allows for more heat dissipation.
- Provides less damping fade and more bottom-out control at higher speeds.
- Fully serviceable and resistant to corrosion and harsh environments.
- 1-year Manufacturer's Warranty
Specifications:
- Front Lift Method : Coil Spring
- Front Lift Height : 3
- Rear Lift Method : Coil Spring
- Rear Lift Height : 1.25"
- Shocks Included : Yes
- Lift Height : 2-3.5"
- Recommended Tires & Wheels (Trimming may be required):
- 35 x 12.5 with 17 x 9 and 5 in. Backspace
Fitment:
- Jeep Gladiator JT 2020-2025
Note:
- Does NOT work with Mojave models.
- Non-Rubicon comes from the factory at a lower ride height, which will net slightly more lift in final stance the same for all models
- Sport Model with aftermarket wheels may rub under articulation
- Rubicon with aftermarket wheels may rub under extreme articulation
- Doe not fit Diesel models.
Other Part Numbers:
BDS Suspension #BDS1439PS-BLDV
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2020-2025 Jeep Gladiator |
Gladiator | 2020-2025 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.