1-480-966-3040 Mon-Fri 8am to 5pm AZ
Performance & Aftermarket Car Parts - Vivid Racing Performance & Aftermarket Car Parts - Vivid Racing
Live Chat
Hello, Sign in My Account
Sign In
Wishlist
0
My Cart
My Cart $0.00
  See more parts for Chevrolet Blazer
Select the year of your Chevrolet Blazer:
BDS Suspension 4 Inch Lift Kit | 4 Inch Block Kit with Add-A-Leaf | FOX 2.0 Performance Series Shock Chevrolet | GMC 1/2 Ton Truck | Suburban 4WD 1977-1987 - BDS125FS
Improve the style and handling of your 1977-1987 Chevy and GMC 1/2 ton truck or SUV with this 4-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability of the K5 Blazer, K10 and K15, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes Glide-Ride leaf springs, 4" steering arm for steering correction, brake line brackets and precision tuned NX2 nitrogen charged shocks. In the rear this kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro shocks.

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.



Features:
  • Easy, 100% Bolt-on installation
  • Glideride leaf springs to provide full lift height and increased capacity
  • New steering arm maintains proper steering angles for improved handling
  • Cast steel blocks and add-a-leaf provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
  • FOX 2.0 Performance Series
    • 2-inch Impact extruded aluminum body
    • Internal floating piston (IFP) monotube design
    • CNC machined 6061-T6 aluminum mounting ends
    • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
    • Race-developed high-flow piston design
    • Application-specific valving to maximize performance
    • Long-lasting clear anodized finish
  • 4 Inch Block Kit with Add-A-Leaf
    • Help freshen up old worn-out factory leaf springs.
    • Provides an additional 1 inch of lift.
    • Includes new center pins.


Specifications:
  • Front Lift Method : Leaf Spring
  • Front Lift Height : 4"
  • Rear Lift Method : Block
  • Rear Lift Height : 4"
  • Shocks Included : Yes
  • Lift Height : 4-5.5"
  • Recommended Tires & Wheels (Trimming may be required):
    • 35 x 12.5 with 15 x 8 and 3.5 in. Backspace


Fitment:
  • Chevrolet Blazer 1987
  • Chevrolet K10 1977-1986
  • Chevrolet K10 Suburban 1977-1986
  • Chevrolet K5 Blazer 1977-1986
  • Chevrolet V10 1987
  • Chevrolet V10 Suburban 1987
  • GMC Jimmy 1977-1987
  • GMC K15 1977-1978
  • GMC K15 Suburban 1977-1978
  • GMC K1500 1979-1986
  • GMC K1500 Suburban 1979-1986
  • GMC V1500 1987
  • GMC V1500 Suburban 1987


Note:
  • The 1/2 ton commonly came with a factory 52 inch eye to eye rear leaf spring. However, some were produced with a 56 inch rear spring. If ordering rear leaf springs, be sure to measure your factory rear spring before ordering.
  • If equipped with a factory front sway bar, order the front sway bar shackle link kit listed.
  • Some vehicle came with factory front dual shocks. If you wish to replace the factory duals, you must order the additional two auxiliary shocks.
  • #001408 come with OE style rubber bushings installed.
  • Exhaust modification may be required to clear front driveshaft.

Other Part Numbers:
BDS Suspension #BDS125FS-BLDV

Proposition 65

⚠ WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle
1987
 Chevrolet Blazer
1977-1986
 Chevrolet C/K 10
1977-1986
 Chevrolet K5 Blazer
1987
 Chevrolet R/V 10
1977-1987
 Chevrolet Suburban
1977-1978
 GMC C/K 15
1979-1986
 GMC C/K 1500
1977-1987
 GMC Jimmy
1987
 GMC V1500

Check out these other great products