.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Dodge Ram 1500
Select the year of your Dodge Ram 1500:
Built to outperform, BDS Suspension engineered a 6-inch lift kit with long arm conversion for your 2003-2007 Dodge RAM 2500 and 3500 4WD gas powered truck that maximizes performance on and off road. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system.
Up front the lift kit includes gas-specific Pro-Ride coil springs, all four control arms plus mounting bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar links, and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks, longer u-bolts, and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
The Dodge Ram truck has 2 different rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.
Features:
Specifications:
Fitment:
Note:
Up front the lift kit includes gas-specific Pro-Ride coil springs, all four control arms plus mounting bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar links, and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks, longer u-bolts, and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.
A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
The Dodge Ram truck has 2 different rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.
Features:
- Tubular long arms reduce caster change and create more controlled feeling on and off road
- Heavy duty control arm brackets maintain proper suspension geometry
- Front high strength progressive rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
- NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
- Block Kit
- Blocks are made from cast iron for strength.
- Tapered for correct pinion angle.
- Steel pin and hole are offset to restore axle position.
Specifications:
- Front Lift Method : Coil Spring
- Front Lift Height : 6
- Rear Lift Method : Block
- Rear Lift Height : 4"
- Shocks Included : Yes
- Lift Height : 6-7.5" ?
- Recommended Tires & Wheels (Trimming may be required):
- 37 x 12.5 with 17 x 9 and 5 in. Backspace
Fitment:
- Dodge Ram 2500/3500 4WD Gas 2003-2007
Note:
- Measure rear axle tube before ordering. Some 4 inch axle models with dual overloads will require u-bolt 4068.
- Power Wagon applications require sway bar link kit #122401. The Power Wagon has a 2 inch taller ride height, so net lift gain will be 4 inch.
- If driveline vibration occurs, order transfer case index kit #122801 or 122802.
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2 - 1-5/8 inch you will need to add part # BDS082404 to your kit.
Other Part Numbers:
BDS Suspension #BDS659H-BLDV
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Dodge Ram 1500 | 2006-2007 | Laramie |
| Dodge Ram 1500 | 2006-2007 | SLT |
| Dodge Ram 2500 | 2003-2007 | ST |
| Dodge Ram 2500 | 2003, 2005-2007 | Laramie |
| Dodge Ram 2500 | 2003-2007 | SLT |
| Dodge Ram 2500 | 2005 | SLT Daytona |
| Dodge Ram 2500 | 2006-2007 | Sport |
| Dodge Ram 2500 | 2006 | SLT Night Runner Sport |
| Dodge Ram 2500 | 2006-2007 | TRX4 |
| Dodge Ram 2500 | 2006-2007 | Power Wagon |
| Dodge Ram 2500 | 2006-2007 | SLT Sport |
| Dodge Ram 2500 Van | 2003 | Base |
| Dodge Ram 3500 | 2003-2007 | Laramie |
| Dodge Ram 3500 | 2003-2007 | ST |
| Dodge Ram 3500 | 2003-2007 | SLT |
| Dodge Ram 3500 | 2006-2007 | Sport |
| Dodge Ram 3500 | 2007 | TRX4 |
| Dodge Ram 3500 Van | 2003 | Base |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.