.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Ford F-250
Select the year of your Ford F-250:
Raise the bar of your 1999-2004 Ford F250 and F350 Super Duty truck by installing this 8-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38" tires.
Up front the lift kit includes Glide-Ride leaf springs, forged drop pitman arm and track bar bracket for steering correction, sway bar links, bump stop brackets and precision tuned NX2 or FOX nitrogen charged shocks.
In the rear the base kit utilizes replacement Glide-Ride full leaf spring packs, u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.
Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
Features:
Specifications:
Fitment:
Note:
Up front the lift kit includes Glide-Ride leaf springs, forged drop pitman arm and track bar bracket for steering correction, sway bar links, bump stop brackets and precision tuned NX2 or FOX nitrogen charged shocks.
In the rear the base kit utilizes replacement Glide-Ride full leaf spring packs, u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.
Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
Features:
- Easy, 100% Bolt-on installation
- Glideride leaf springs to provide full lift height and increased capacity
- Track bar relocation bracket and pitman arm maintains proper steering angles for improved handling
- Cast steel blocks provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
- NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
Specifications:
- Front Lift Method : Leaf Spring
- Front Lift Height : 8"
- Rear Lift Method : Leaf Spring
- Rear Lift Height : 8"
- Shocks Included : Yes
- Lift Height : 8-10"
- Recommended Tires & Wheels (Trimming may be required):
- 38 x 12.5 with 16 x 10 and 4 in. Backspace
Fitment:
- Ford F250/F350 Super Duty 4WD 1999-2004
Note:
- These truck were manufactured with two different style front u-bolts. You will need to know if your front leaf spring u-bolts are square or are half way between round and square with a gentle radius around the OE cast u-bolt plate before ordering.
- Vehicles produced before 3/1/99 require a different box kit. You must check the production date on the door prior to ordering.
- The Superduty came from the factory with a 2 inch, 3 inch, or 4 inch rear block. If you wish to truly level your vehicle it may be necessary to change the rear OE block.
- Will not fit dually applications.
- If your vehicle is equipped with a carrier bearing, you will want the 123402 drop kit.
- The front driveshaft will need to be lengthened and/or clearance ground depending on how the vehicle is equipped.
Other Part Numbers:
BDS Suspension #BDS317H-BLDV
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Ford F-250 | 1999-2004 | XLT |
| Ford F-250 | 1999 | Lariat |
| Ford F-250 | 1999-2004 | XL |
| Ford F-250 | 1999 | XLT VIP |
| Ford F-250 | 1999 | Base |
| Ford F-250 | 2004 | Flotillera |
| Ford F-250 Super Duty | 1999-2004 | Lariat |
| Ford F-250 Super Duty | 1999-2004 | XL |
| Ford F-250 Super Duty | 1999-2004 | XLT |
| Ford F-250 Super Duty | 2004 | King Ranch |
| Ford F-250 Super Duty | 2004 | Harley-Davidson Edition |
| Ford F-350 | 1999-2004 | XL |
| Ford F-350 | 1999-2004 | XLT |
| Ford F-350 Super Duty | 1999-2004 | XLT |
| Ford F-350 Super Duty | 1999-2004 | XL |
| Ford F-350 Super Duty | 1999-2004 | Lariat |
| Ford F-350 Super Duty | 2003-2004 | King Ranch |
| Ford F-350 Super Duty | 2004 | Harley-Davidson Edition |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.