BDS Suspension 4 Inch Lift Kit with 4-Link | Block Kit with Factory Overload | NX2 Nitro Series Shock Ford F250 | F350 Super Duty 4WD Gas 2008-2010

Name: BDS Suspension 4 Inch Lift Kit with 4-Link | Block Kit with Factory Overload | NX2 Nitro Series Shock Ford F250 | F350 Super Duty 4WD Gas 2008-2010
Brand: BDS Suspension
SKU: BDS545H
Price: 1834.04 USD
Availability: LimitedAvailability

~~$2,292.55~~ SALE: $1,834.04

As low as $123/mo^* with Affirm. Financing Options

Add to Wishlist

Model#BDS545H
ManufacturerBDS Suspension

Have a Question?

Live Chat (480) 966 3040

RISK FREE SHOPPING

IN-HOUSE EXPERTS

BEST PRICES, AMAZING SERVICE

Raise the height of your 2008-2010 Ford F250 and F350 Super Duty gas truck with this 4-inch lift kit and 4-Link conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear the base kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

A pair of full-length, gas-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features:

Easy, 100% Bolt-on installation
Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
Heavy duty 4-Link control arms offer improved handling, stability, strength and caster control during wheel travel
Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
Fabricated steel blocks provide level stance from front to rear
Standard NX2 Nitro shocks with vehicle-specific valving for better control
Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
NX2 Nitro Series

Nitrogen-charged
Twin-tube design
10-stage velocity-sensitive valving
Dual-welded ends for increased strength
1-3/8-inch high-flow piston
Self-lubricating seals
Silver powder coat finish

Block Kit

Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs.
Blocks made of steel for high strength.
Designed to provide correct pinion angles.

Specifications:

Front Lift Method : Coil Spring
Front Lift Height : 4"
Rear Lift Method : Block
Rear Lift Height : 5"
Shocks Included : Yes
Lift Height : 4-5.5"
Recommended Tires & Wheels (Trimming may be required):

35 x 12.5 with 17 x 9 and 4.5 in. Backspace
35 x 12.5 with 18 x 9 and 4.5 in. Backspace
35 x 12.5 with 20 x 9 and 4.5 in. Backspace

Fitment:

Ford F250/F350 Super Duty 4WD Gas 2008-2010

Note:

These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
If your vehicle is equipped with a carrier bearing, you will need to order 123402.
Removal of factory block required.
Front exhaust modification may be required to clear the front driveshaft on gas models.
U-bolts will not fit dually models.
Dropped pitman arm will not fit 10 lug widetrack F350 models.

Fitment: