BMR Suspension Sway Bar Kit With Bushings, Front, Hollow 35mm Red Chevrolet Camaro | Pontiac Firebird 1993-2002 | SB001R
  See more parts for your Chevrolet Camaro

BMR Suspension Sway Bar Kit With Bushings, Front, Hollow 35mm Red Chevrolet Camaro | Pontiac Firebird 1993-2002


BMR Suspension

Model #SB001R

Free Shipping

In Stock

Shopper Award

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension’s SB001 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 35mm DOM tubing, the SB001 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.

BMR Suspension designed the SB001 sway bar for street performance, autocross, and road race applications. The large adjustable sway bar’s three positions give you the versatility to drive to and from the road course or autocross and still out handle the competition with the same sway bar. The SB001 front sway bar gives you a 129% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your F-body so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB001 attaches to your F-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!

BMR Suspension’s SB001 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! All packages come with polyurethane mounting bushings and endlink kits. 


  • Fits 1993-2002 GM F-body
  • Designed for street performance, autocross, and road race applications
  • Dramatically reduces body roll
  • 129% increase in sway bar rate (depending on year and model)
  • Cold formed to better resist torsional fatigue
  • Manufactured from 35mm heavy-wall DOM tubing for increased strength
  • 88-durometer, greasable polyurethane bushings
  • Zinc-plated inner sleeves
  • Durable powdercoat finish
  • 1-hour installation time
  • Proudly designed in the U.S.A.
  • Proudly made in the U.S.A.
  • Chevrolet Camaro 1993-2002
  • Pontiac Firebird 1993-2002
  • Convertible models MAY need to trim or remove the additional front support brace above the steering rack.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

Vehicle Engine Notes
Chevrolet Camaro
  • Front
Chevrolet Camaro
Indianapolis 500 Pace Car
  • Front
Chevrolet Camaro
  • Front
Chevrolet Camaro
  • Front
Chevrolet Camaro
  • Front
Chevrolet Camaro
Z28 SS
  • Front
Pontiac Firebird
  • Front
Pontiac Firebird
  • Front
Pontiac Firebird
Trans Am
  • Front
Pontiac Firebird
Trans Am GT
  • Front

Who is BMR Suspension?

When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.

BMR Suspension is a brand you can trust when it comes to quality suspension products.

How It Started

BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.

They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.

Proudly Made in the USA

BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars. 

All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.

Real-World Testing

BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.

Purchase BMR products at Vivid Racing

Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension. 

For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.


BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. Obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit of returned merchandise. This warranty specifically excludes impact damage or damage to powdercoat. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. BMR will ship the replacement product at no charge using UPS Ground. If the customer would like to upgrade the shipping method (for example, Next Day Air), the customer will be charged the difference in shipping cost.

BMR product is designed to be used with OEM product and other BMR products. BMR does not warranty our product for fitment with aftermarket product from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. BMR products that are returned due to fitment issues with OEM components or BMR product will receive a full refund. BMR products that are returned due to fitment issues with aftermarket product will be subject to a 15% restocking fee.

Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by BMR, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed, implied or written, THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer's installation or use of products purchased from BMR.

Check out these other great products